Topic: Msi gtx 1060 3gb (3gt oc) Low hashrate on ethash (Read 6073 times)
I have 15 x gtx 1060 hynix 6G, ofc i also have 15.6mh/s default i cna olny push -150 core/200mem resulting in 17.5 mh/s. Did you find a way to mod bios for lower timings?
I'm writing through an interpreter, do not scold ...
Yes, the problem is in the memory of Hynix.
An interesting result of 17.5 mh/s is obtained if we decrease the memory frequency by -150. Try it. This indicates that the problem is in the timings.
Urgently need a BIOS programmer to replace timings. Or the finished BIOS is already replaced by timings.
Are ready to pay, who can find, which will crack the encrypted BIOS.
Yes, the problem is in the memory of Hynix.
An interesting result of 17.5 mh/s is obtained if we decrease the memory frequency by -150. Try it. This indicates that the problem is in the timings.
Urgently need a BIOS programmer to replace timings. Or the finished BIOS is already replaced by timings.
Are ready to pay, who can find, which will crack the encrypted BIOS.
Anyone got solution for Hynix moemory ?
To all of you wondering about lower hashrates with their GTX 1060-3,
as I said before here
https://bitcointalksearch.org/topic/m.19288923
I won´t recommend the GTX-1060 with 3 GB because they have less cuda-cores, a lower bandwidth memory interface and usually lower base/boost-clocks.
GTX 1060-6: 1280 cores
GTX-1060-3: 1152 cores
... so now way to get the same speed.
I trimmed my 2 cards a little more with MEM + 600, now getting ~ 44.5 MH/s at daggerhashimoto,
still using 230W at wall with one core G4400 mining cryptonight at 49 H/s on top.
as I said before here
https://bitcointalksearch.org/topic/m.19288923
I won´t recommend the GTX-1060 with 3 GB because they have less cuda-cores, a lower bandwidth memory interface and usually lower base/boost-clocks.
GTX 1060-6: 1280 cores
GTX-1060-3: 1152 cores
... so now way to get the same speed.
I trimmed my 2 cards a little more with MEM + 600, now getting ~ 44.5 MH/s at daggerhashimoto,
still using 230W at wall with one core G4400 mining cryptonight at 49 H/s on top.
Same issue with all 10 of my Asus Phoenix 1060 3gb, they all have Hynix memory. It doesn't overclock bad, it just seems to be slow.
experiencing the same thing with my cards msi 1060 3gb dual fans.
only getting about 14.8-15mh per card.
i see other users get 18mh and above for stock settings, any solutions to fix my low hashrate?
only getting about 14.8-15mh per card.
i see other users get 18mh and above for stock settings, any solutions to fix my low hashrate?
Hi,
I found this on someone else reply to having bad hashrate with nvidia cards.
check this settings:
NVIDIA Control Panel -> Manage 3D Settings -> Optimize for compute performance -> On
I found this on someone else reply to having bad hashrate with nvidia cards.
check this settings:
NVIDIA Control Panel -> Manage 3D Settings -> Optimize for compute performance -> On
Thanks, unfortunately this setting is for 9x series cards only. Its already enabled on 10x series and isnt even an option in the driver settings.
Hi,
I found this on someone else reply to having bad hashrate with nvidia cards.
check this settings:
NVIDIA Control Panel -> Manage 3D Settings -> Optimize for compute performance -> On
I found this on someone else reply to having bad hashrate with nvidia cards.
check this settings:
NVIDIA Control Panel -> Manage 3D Settings -> Optimize for compute performance -> On
install driver cuda 8.0 and you will see a diference
i have cuda 8.0. It seems hynix memory is to blame
install driver cuda 8.0 and you will see a diference
i have cuda 8.0. It seems hynix memory is to blame
install driver cuda 8.0 and you will see a diference
You need to oc memory 600-1000mhz to get 22Mhash
You can't overclock memory to 600 mhz, because freakin Hynix crashing windows on 380-390 mhz ...
any ideas for other options? any suggestions?
Now is more profitable to mine ZEC with 1060 3Gb Hynix, because on ZEC I get 295-300 sol/s, on ETH I get only 17.7-18 Mh/s.
With current difficulties and hash rates, my profit is 12-13% higher on ZEC.
Why ZEC over DGB skein?
You need to oc memory 600-1000mhz to get 22Mhash
You can't overclock memory to 600 mhz, because freakin Hynix crashing windows on 380-390 mhz ...
any ideas for other options? any suggestions?
Now is more profitable to mine ZEC with 1060 3Gb Hynix, because on ZEC I get 295-300 sol/s, on ETH I get only 17.7-18 Mh/s.
With current difficulties and hash rates, my profit is 12-13% higher on ZEC.
Hi i have 6x msi gtx 1060 gaming x 3gb i was able to overclock them to +750 memory and +30 core have ethereum only 19,5 mh/s per card. Have last nvidia drivers installed and last windows driver too. Can it be becouse of windows, maby i should try lynux unbuntu or simplemining os. Can somebody help?
You need to oc memory 600-1000mhz to get 22Mhash
You can't overclock memory to 600 mhz, because freakin Hynix crashing windows on 380-390 mhz ...
any ideas for other options? any suggestions?
You need to oc memory 600-1000mhz to get 22Mhash
You can't overclock memory to 600 mhz, because freakin Hynix crashing windows on 380-390 mhz ...
I bought for testing some nvidia cards,
atm I'm on asus dual 1060 4g with hynix memory
I did a bit research and figured out that they are working better on linux, I'm going to try that today.
on stock I get 15mhs and 18mhs on 200/500 and after couple minutes crash.
I think hynix memory is the problem in my case
any suggestions and ideas will be helpful for me too
atm I'm on asus dual 1060 4g with hynix memory
I did a bit research and figured out that they are working better on linux, I'm going to try that today.
on stock I get 15mhs and 18mhs on 200/500 and after couple minutes crash.
I think hynix memory is the problem in my case
any suggestions and ideas will be helpful for me too
I tried Oc (max 19mhs) , windows creators update , bios thing ,any drivers , multiple miners and pool . Result is same , any idea ?
Hi,
I don't know if this your setup, but if you have the on-board display enabled, disable it from bios.
Users have reported that this fixed their issue with 1060 cards.
Hope this will help you.
I don't know if this your setup, but if you have the on-board display enabled, disable it from bios.
Users have reported that this fixed their issue with 1060 cards.
Hope this will help you.
unfortunately this didn't work but thanks for the suggestion.
Read the following. Users reported that it's a windows thing, and after updating to the latest version it worked fine. Others say it's Drivers version related.
Check it out: https://www.reddit.com/r/EtherMining/comments/6cktr8/gtx_1060_hash_rate/
Hi,
I don't know if this your setup, but if you have the on-board display enabled, disable it from bios.
Users have reported that this fixed their issue with 1060 cards.
Hope this will help you.
I don't know if this your setup, but if you have the on-board display enabled, disable it from bios.
Users have reported that this fixed their issue with 1060 cards.
Hope this will help you.
unfortunately this didn't work but thanks for the suggestion.
Jump to: