MSI X570 Gaming Plus, Sapphire RX580 Freeze.

ComX

member

Activity: 134

Merit: 12

Yes, you are right... Overclock was the problem..
But Rizer was ok.. worked 25 hours.
Then i remove the Rizer and works too.. problem was overclocking..
Now change to 1150, and leave 2150
ETH 30.7Mh/s at 95Watts... before at 1250 have 110 Watts..
Now i try if it works 24 or more hours.

If it work now without any problems, i´m finish after a lot of headache Grin

In next 1 or 2 Days i post the Final Report.
Hope now all is fine.. then i´m ready after a lot of headache Grin

.

One last Question i have... what dongle i have to put in the GPU.? Because later don´t have Monitor there.
Now i try only with plug in the HDMI Cable to the GPU, but only get very small Picture with Teamviewer or Anydesk. Huh

- Have found -

rdluffy

legendary

Activity: 2366

Merit: 1408

Quote from: ComX on September 08, 2019, 01:36:23 PM

Hey Guys... a lot of Time for searching is gone... but now i think i have found it..
Settings was at 1200 and 2250 first.
Then changed to 1250 and 2250, same Problem.
Now change it to 1250 and 2150 and everything goes well.
Hashrate 30,9Mh/s @ 108 Watt. (Will try settings to reduce you told me in net Days.
Now it runs 24 hours without freezing.
But have try with only one 8GB RAM.
Tomorrow i try with both again, to see if freezing comes from the mem setting.

So, it's probably the problem I tell you first Grin

Overclock

Almost problems in rigs are Overclock and Risers, I remember the headache to maintain rigs working

ComX

member

Activity: 134

Merit: 12

Hey Guys... a lot of Time for searching is gone... but now i think i have found it..
Settings was at 1200 and 2250 first.
Then changed to 1250 and 2250, same Problem.
Now change it to 1250 and 2150 and everything goes well.
Hashrate 30,9Mh/s @ 108 Watt. (Will try settings to reduce you told me in net Days.
Now it runs 24 hours without freezing.
But have try with only one 8GB RAM.
Tomorrow i try with both again, to see if freezing comes from the mem setting.

rdluffy

legendary

Activity: 2366

Merit: 1408

Quote from: ComX on September 06, 2019, 01:03:09 AM

Now have install new Windows.. Install Adrenaline 19.8.3
Patch Driver with Pixel Clock Patcher.
Change from Graphic to Calculate at Wattman, and load Settings File with 1200, and 2250.
Now ETH Hashrate is 32,2Mh/s at 101 Watt.
Looks good.
System now runs 1 Hour without freezing.
But sometimes if i shut down the PC i got an Strange Error Message, that there is an Error in Ram.
Next Time i make a Screenshot.
Now have remove one Ram Module. PC are running now with 1 8GB Corsair. Looks works better till now.
Later try Ram from my Computer to compare.

Then post next results..

Strange Strange...

Yes, strange...Looks like you have some hardware with problem or with incompatibility and maybe this is the reason you system is unstable
Keep us updated

MATHReX

sr. member

Activity: 861

Merit: 281

Quote from: ComX on September 05, 2019, 06:37:34 AM

OverdriveNtool don´t work after installing the new Adrenaline Drivers.. needs some Library or so..
LAter i try to install new windows and check again..

I'm using Adrenaline Drivers 19.5.2 and OverdriveNtool works fine with my Vega 56 flashed with 64 bios.

Quote from: ComX on September 06, 2019, 07:53:39 AM

Now i set the 1200 to 1250 in Wattman.
Result: ETH from 32,2 Mh/s to 32.4 Mh/s @ 110 Watt and runs stable since 3 hours..
Hope now it´s the right setting..

Freeze after 4 Hours Sad

That's an amazing hash rate for a RX 580 but the power consumption can be reduced a bit. I had my RX 580 do around 30 MH/s with 75W in claymore.
Just reduce the core clock & core voltage as much as you can & reducing memory voltage without affecting hash rate is the way to go.
Also check for the ASIC quality in GPU-z, this will provide you with a rough estimate as to how aggressive undervolt you can do with the card.

ComX

member

Activity: 134

Merit: 12

Now i set the 1200 to 1250 in Wattman.
Result: ETH from 32,2 Mh/s to 32.4 Mh/s @ 110 Watt and runs stable since 3 hours..
Hope now it´s the right setting..

Freeze after 4 Hours Sad

ComX

member

Activity: 134

Merit: 12

Now have install new Windows.. Install Adrenaline 19.8.3
Patch Driver with Pixel Clock Patcher.
Change from Graphic to Calculate at Wattman, and load Settings File with 1200, and 2250.
Now ETH Hashrate is 32,2Mh/s at 101 Watt.
Looks good.
System now runs 1 Hour without freezing.
But sometimes if i shut down the PC i got an Strange Error Message, that there is an Error in Ram.
Next Time i make a Screenshot.
Now have remove one Ram Module. PC are running now with 1 8GB Corsair. Looks works better till now.
Later try Ram from my Computer to compare.

Then post next results..

Strange Strange...

rdluffy

legendary

Activity: 2366

Merit: 1408

Do a format on windows, and try with only one GPU (the problematic one) and then add the second GPU
Sometimes you have to start from zero to solve this kind of problem
And keep us updated

But did you already tried:

Overclock - try to run stock settings and you'll see if the problem is overclock
Update all, windows, drivers, miners...
Check the connections between GPU and mobo...

ComX

member

Activity: 134

Merit: 12

OverdriveNtool don´t work after installing the new Adrenaline Drivers.. needs some Library or so..
LAter i try to install new windows and check again..

MATHReX

sr. member

Activity: 861

Merit: 281

Quote from: ComX on September 04, 2019, 10:37:56 AM

Don´t know how to set... one - or two -- for clock and mem.. can´t find any settings txt or so.
Cry

..why all is changing.. damn ;-)

Use the software "OverdriveNtool" for it.
Change the P7 core value & P3 Memory value, play with them & see if you can get better hashrate per watt.
Here is the link: https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/

ComX

member

Activity: 134

Merit: 12

Don´t know how to set... one - or two -- for clock and mem.. can´t find any settings txt or so.
Cry

..why all is changing.. damn ;-)
And nothing changed.. ETH 13Mh/s

I think i install a fresh Windows... look if its work

valjean

newbie

Activity: 18

Merit: 0

You should try TeamRedMiner and set core clock speed to 1250 and mem speed to 2000. With this you should hit 1000k/h

ComX

member

Activity: 134

Merit: 12

Thats strange.. because on xmr i have only around 420 h/s.
Same was on Crimson if i not set to Compute. After i swich to Compute have around 900h/s on RX580.
Anything else i can change.?

valjean

newbie

Activity: 18

Merit: 0

Hello ComX,

With the latest drivers you don't need anymore to active this mode (the driver detect and set the mining mode automaticaly). This is the reason why you don't find the option.

ComX

member

Activity: 134

Merit: 12

Now have installed latest Adrenaline Driver.. but where is the option to swich to Compute Mode.??
At Games, Global Settings not there. Huh

vuli1

jr. member

Activity: 238

Merit: 3

dl new drivers, in CCC change from workload to compute mode.

ComX

member

Activity: 134

Merit: 12

Later i try the Adrenaline Driver first... and check one by one.
Thx for all the Details.
Will reply if there are any changes.

rdluffy

legendary

Activity: 2366

Merit: 1408

You have to check and test item by item, this is a part of mining that i did not miss Cheesy

Most of my problems were:

Overclock - try to run stock settings and you'll see if the problem is overclock
Update all, windows, drivers, miners...
Check the connections between GPU and mobo...

and post here your results

swogerino

legendary

Activity: 3318

Merit: 1247

Bitcoin Casino Est. 2013

I will suggest you that the Crimson driver 17.11 is quite an old one right now,sure it was a great one for the August of 2017 when it came out but now we are two years later than that and technology advances in a rapid pace.Download the latest adrenaline driver after DDU-ing the old drivers and set the workload to Compute.

Setting the virtual memory for more than 16 GB would be a good starting point,also downloading the latest BIOS update and trying to read a BIOS configuration that is suitable for mining for your new motherboard is another thing you should do.

MATHReX

sr. member

Activity: 861

Merit: 281

Virtual memory set above 16GB?
Did you try the latest drivers? I'll recommend using them after using DDU to clean the old drivers/
Then patch the driver using pixel patcher and see if it works.

Topic: MSI X570 Gaming Plus, Sapphire RX580 Freeze. (Read 298 times)