Figured I should move this here, instead of bugging you via PM.. Another thought:
- Network (top of tree) could show total combined hash rate for all
Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 105. (Read 827336 times)
January 25, 2014, 04:58:45 PM
January 25, 2014, 01:55:07 PM
How do i set this up as I have tried a number of times and failed every time.
Enable the Stratum Proxy under Settings > Advanced miner settings. Then point your miners at the IP & Port of MultiMiner / bfgminer.
Note that if you have hardware with older (buggy) builds of cgminer they do not work properly with Stratum Proxies (including bfgminer and slush). If the firmware on the devices can be updated to a modern version of cgminer, con has fixed it since then.
January 25, 2014, 01:08:10 PM
Any chance to have a antminer firmware remake with this buit in would be nice feature to add multiminer into firmware of antmienrs and get bfgmienr working with it.
Working on AntMiner S1 firmware is next after MultiMiner Remoting.
Or some way for multiminer to interact with them
You can use the Stratum Proxy built into MultiMiner.
How do i set this up as I have tried a number of times and failed every time.
January 25, 2014, 11:37:08 AM
Hi, could you make an option in next version? Im talking about difficulty source, coinchoose show this parametr with some delay and this is negatively affects to the pools hypes earnings (for coins with small block recalculation). It would be better if it was possible to get the difficulty from the wallet (command "getdifficulty" in wallet console)
Have you tried using CoinWarz (from the Settings screen) instead?
January 25, 2014, 11:36:28 AM
One, I love how quick and easy it is to apply your advertised (released) updates within the app. Would it be possible to advertise your bleeding edge releases in the same way, so that we can choose to accept beta updates from within the app if we want to? With multiple machines this makes life a lot easier to apply these updates. Which brings me to my next question...
I do plan on doing this. The GitHub releases page allows you to mark releases as "pre-release". I plan on (some day) updating the code in MultiMiner so you can choose if you want pre-release updates or not. This will start pulling those pre-releases from GitHub in an automated fashion (similar to how it works now).
Two, apologies if I missed it, but will we be able to update MuM on our other machines remotely with this release as well?
That is planned along with the other "farm-specific" features of MultiMiner Remoting. Thanks for the suggestions!
January 25, 2014, 11:14:04 AM
Hi, could you make an option in next version? Im talking about difficulty source, coinchoose show this parametr with some delay and this is negatively affects to the pools hypes earnings (for coins with small block recalculation). It would be better if it was possible to get the difficulty from the wallet (command "getdifficulty" in wallet console)
January 25, 2014, 08:28:01 AM
Nwoolls,
Going to try and test this today myself. As always, thanks for your hard work.
Can I make two quick suggestions?
One, I love how quick and easy it is to apply your advertised (released) updates within the app. Would it be possible to advertise your bleeding edge releases in the same way, so that we can choose to accept beta updates from within the app if we want to? With multiple machines this makes life a lot easier to apply these updates. Which brings me to my next question...
Two, apologies if I missed it, but will we be able to update MuM on our other machines remotely with this release as well?
Thanks again!
Going to try and test this today myself. As always, thanks for your hard work.
Can I make two quick suggestions?
One, I love how quick and easy it is to apply your advertised (released) updates within the app. Would it be possible to advertise your bleeding edge releases in the same way, so that we can choose to accept beta updates from within the app if we want to? With multiple machines this makes life a lot easier to apply these updates. Which brings me to my next question...
Two, apologies if I missed it, but will we be able to update MuM on our other machines remotely with this release as well?
Thanks again!
January 25, 2014, 01:20:56 AM
To keep this little development live-blog going, a new preview of 2.5 is available for testing.
This allows you to Scan Hardware and Quick Switch other rigs on your network, in addition to the existing monitoring, Starting, Stopping, and Restarting.
This allows you to Scan Hardware and Quick Switch other rigs on your network, in addition to the existing monitoring, Starting, Stopping, and Restarting.
Version 2.5 PR5 (preview release) of MultiMiner is now available:
https://www.dropbox.com/s/vbul7x5yemjm38p/MultiMiner-2.5.0.zip
This update rounds out command support for MultiMiner Remoting. It is now possible to using Remoting to:
- Start mining
- Stop mining
- Restart mining
- Scan hardware
- Change coins for individual devices
- Quick Switch coins
- Toggle Dynamic Intensity
- Toggle mining on individual devices
I see plenty of people trying 2.5 from my telemetry - please let me know if you are running into any bugs or errors!
Edit: Even if you are not running multiple rigs, there have been a lot of changes under the hood. If you have time to test this build for bugs, even briefly, I'd appreciate it!
January 24, 2014, 11:04:34 PM
Any chance to have a antminer firmware remake with this buit in would be nice feature to add multiminer into firmware of antmienrs and get bfgmienr working with it.
Working on AntMiner S1 firmware is next after MultiMiner Remoting.
Or some way for multiminer to interact with them
You can use the Stratum Proxy built into MultiMiner.
January 24, 2014, 10:31:08 PM
Any chance to have a antminer firmware remake with this buit in would be nice feature to add multiminer into firmware of antmienrs and get bfgmienr working with it.
Or some way for multiminer to interact with them
Or some way for multiminer to interact with them
January 24, 2014, 08:50:28 PM
A new preview of version 2.5 with MultiMiner Remoting is now available. This includes many bug fixes and refinements as well as the beginning of secure, remote command support. With this release you can Start, Stop, and Restart any of the miners on your network.
Future updates will include more remote commands such as switching coins and scanning hardware.
Any feedback or issues you can report would be appreciated! Happy mining!
Future updates will include more remote commands such as switching coins and scanning hardware.
Any feedback or issues you can report would be appreciated! Happy mining!
To keep this little development live-blog going, a new preview of 2.5 is available for testing:
https://www.dropbox.com/s/vbul7x5yemjm38p/MultiMiner-2.5.0.zip
This allows you to Scan Hardware and Quick Switch other rigs on your network, in addition to the existing monitoring, Starting, Stopping, and Restarting.
January 24, 2014, 08:34:05 PM
Pool settings, config, all of them make problem
Why can't you record a video of this occurring?
January 24, 2014, 08:18:40 PM
I use 2 PC 4xR9280X and 4x R9280X normally hashrate 2,95 mhas but after I change in settings Hashrate suddenly changes.
After you change what settings?
Pool settings, config, all of them make problem
January 24, 2014, 07:25:19 PM
I use 2 PC 4xR9280X and 4x R9280X normally hashrate 2,95 mhas but after I change in settings Hashrate suddenly changes.
After you change what settings?
January 24, 2014, 07:21:24 PM
There is a really big problem in this app. Khas rate is fall down.
I uninstall and delete all files about multiminer after that it works very well
I uninstall and delete all files about multiminer after that it works very well
I have to say this is absolutely not true.
Care to elaborate? Hash-rate in what application? Using what hardware? MultiMiner doesn't install a single thing that would affect anything outside of MultiMiner whatsoever. Most likely you are attributing some other variance to the action of moving or removing MultiMiner.
Edit: If you believe this to be an issue, please use the free utility Jing to record this experience and then post the screencast (they do free hosting as well). That may help more than trying to explain.
Please do not misunderstand me I just want to give you feedback.
I am not new your application and software. Thanks god for I found your software and application.
But there is something wrong I cannot record it because it changes.
Let me tell you what happening;
I use 2 PC 4xR9280X and 4x R9280X normally hashrate 2,95 mhas but after I change in settings Hashrate suddenly changes. Temperatures same but hashrate lower then normal.
Sometimes it works very well. Sometimes I restart pc and this problem fix. But generally I have same problem in my 2 pc
January 24, 2014, 07:13:39 PM
That's still ok though as with stratum I can still check the status on my S3. 
Not for now but in the future yes. For now the only way to use an Avalon or S1 with MultiMiner is through the Stratum Proxy. MultiMiner Remoting is strictly for multiple instances of MultiMiner or multiple rigs - again for now.
That is very cool.
Now should this work as well with say an Avalon or Ant S1 that uses it's own mining interface or is that not an option due to their nature?
Now should this work as well with say an Avalon or Ant S1 that uses it's own mining interface or is that not an option due to their nature?
Not for now but in the future yes. For now the only way to use an Avalon or S1 with MultiMiner is through the Stratum Proxy. MultiMiner Remoting is strictly for multiple instances of MultiMiner or multiple rigs - again for now.
January 24, 2014, 07:13:03 PM
After the auto update something goes bad...Hashrate fall down. Or if you change your settings something change and again hashrate fall down. I uninstall (delete all files multiminer) and setup again twice a day 
January 24, 2014, 06:58:20 PM
That is very cool.
Now should this work as well with say an Avalon or Ant S1 that uses it's own mining interface or is that not an option due to their nature?
Now should this work as well with say an Avalon or Ant S1 that uses it's own mining interface or is that not an option due to their nature?
Not for now but in the future yes. For now the only way to use an Avalon or S1 with MultiMiner is through the Stratum Proxy. MultiMiner Remoting is strictly for multiple instances of MultiMiner or multiple rigs - again for now.
January 24, 2014, 06:54:52 PM
That is very cool.
Now should this work as well with say an Avalon or Ant S1 that uses it's own mining interface or is that not an option due to their nature?
Now should this work as well with say an Avalon or Ant S1 that uses it's own mining interface or is that not an option due to their nature?
A new preview of version 2.5 with MultiMiner Remoting is now available. This includes many bug fixes and refinements as well as the beginning of secure, remote command support. With this release you can Start, Stop, and Restart any of the miners on your network.
https://www.dropbox.com/s/vbul7x5yemjm38p/MultiMiner-2.5.0.zip
Future updates will include more remote commands such as switching coins and scanning hardware.
Any feedback or issues you can report would be appreciated! Happy mining!
https://www.dropbox.com/s/vbul7x5yemjm38p/MultiMiner-2.5.0.zip
Future updates will include more remote commands such as switching coins and scanning hardware.
Any feedback or issues you can report would be appreciated! Happy mining!
January 24, 2014, 06:39:16 PM
A new preview of version 2.5 with MultiMiner Remoting is now available. This includes many bug fixes and refinements as well as the beginning of secure, remote command support. With this release you can Start, Stop, and Restart any of the miners on your network.
https://www.dropbox.com/s/vbul7x5yemjm38p/MultiMiner-2.5.0.zip
Future updates will include more remote commands such as switching coins and scanning hardware.
Any feedback or issues you can report would be appreciated! Happy mining!
https://www.dropbox.com/s/vbul7x5yemjm38p/MultiMiner-2.5.0.zip
Future updates will include more remote commands such as switching coins and scanning hardware.
Any feedback or issues you can report would be appreciated! Happy mining!
Jump to: