My Antminer S3+ cant overclock | Bitcointalksearch.org

BTC-TMXSTAR

full member

Activity: 224

Merit: 100

Quote from: philipma1957 on December 24, 2014, 07:52:02 AM

Quote from: BTC-TMXSTAR on December 24, 2014, 01:40:14 AM

Quote from: philipma1957 on December 23, 2014, 11:31:05 PM

look at the screen shot above

Hi!
I got 39 HW running for 2 hours now.
is it still ok?

yeah errors of 1 in 100 are okay. 1 in 500 is good

A very fast error check is this (it is an estimate and close to correct the real formula is longer but they are almost the same number)

HW/DiffA

so for the one below :

433 errors in 30 hours

433/11,907,200 = 0.00003636 or 1 in 27,500 = super good or great.

also
freq 231 mines at 460 gh
freq 237 mines at 475 gh
freq 243 mines at 490 gh

so if you are doing 485-495gh and 1/500 errors you are good

Thanks philipma1957! Cheesy

im going to overclock it again to 243!
Thanks for your help again!

God Bless!!!!!

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: BTC-TMXSTAR on December 24, 2014, 01:40:14 AM

Quote from: philipma1957 on December 23, 2014, 11:31:05 PM

look at the screen shot above

Hi!
I got 39 HW running for 2 hours now.
is it still ok?

yeah errors of 1 in 100 are okay. 1 in 500 is good

A very fast error check is this (it is an estimate and close to correct the real formula is longer but they are almost the same number)

HW/DiffA

so for the one below :

433 errors in 30 hours

433/11,907,200 = 0.00003636 or 1 in 27,500 = super good or great.

also
freq 231 mines at 460 gh
freq 237 mines at 475 gh
freq 243 mines at 490 gh

so if you are doing 485-495gh and 1/500 errors you are good

BTC-TMXSTAR

full member

Activity: 224

Merit: 100

Quote from: Zich on December 24, 2014, 04:21:49 AM

Quote from: BTC-TMXSTAR on December 24, 2014, 01:40:14 AM

Quote from: philipma1957 on December 23, 2014, 11:31:05 PM

look at the screen shot above

Hi!
I got 39 HW running for 2 hours now.
is it still ok?

Yes, that's fine

Thanks again Zich! :3

God Bless!!!!!

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: BTC-TMXSTAR on December 24, 2014, 01:40:14 AM

Quote from: philipma1957 on December 23, 2014, 11:31:05 PM

look at the screen shot above

Hi!
I got 39 HW running for 2 hours now.
is it still ok?

Yes, that's fine

BTC-TMXSTAR

full member

Activity: 224

Merit: 100

Quote from: philipma1957 on December 23, 2014, 11:31:05 PM

look at the screen shot above

Hi!
I got 39 HW running for 2 hours now.
is it still ok?

BTC-TMXSTAR

full member

Activity: 224

Merit: 100

Quote from: philipma1957 on December 23, 2014, 11:40:36 PM

Quote from: BTC-TMXSTAR on December 23, 2014, 11:36:44 PM

Quote from: philipma1957 on December 23, 2014, 11:33:56 PM

you have newer firmware leave volts at stock, i think 725 for the volts is stock

243 or 237 freq is the key

Hi! this is my stock voltage.
Can i reach 250M?
This is my screen shot of mine.
http://prntscr.com/5kd9gg

if you have a cool room and a good psu some make 250 freq some do 243 try both for an hour and look at your errors.

I have owned around 25-30 of them most like 237 or 243 not 250 but I had a few that did 250

Hi Philipma1957!

Thank you very much!
My miner is running now @ 243 freq. 0 HW errors Grin

for 10minutes now Grin

Thanks Philipma1957!
and
God Bless!!!!!

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: BTC-TMXSTAR on December 23, 2014, 11:36:44 PM

Quote from: philipma1957 on December 23, 2014, 11:33:56 PM

you have newer firmware leave volts at stock, i think 725 for the volts is stock

243 or 237 freq is the key

Hi! this is my stock voltage.
Can i reach 250M?
This is my screen shot of mine.
http://prntscr.com/5kd9gg

if you have a cool room and a good psu some make 250 freq some do 243 try both for an hour and look at your errors.

I have owned around 25-30 of them most like 237 or 243 not 250 but I had a few that did 250

BTC-TMXSTAR

full member

Activity: 224

Merit: 100

Quote from: philipma1957 on December 23, 2014, 11:33:56 PM

you have newer firmware leave volts at stock, i think 725 for the volts is stock

243 or 237 freq is the key

Hi! this is my stock voltage.
Can i reach 250M?
This is my screen shot of mine.
http://prntscr.com/5kd9gg

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

you have newer firmware leave volts at stock, i think 725 for the volts is stock

243 or 237 freq is the key

BTC-TMXSTAR

full member

Activity: 224

Merit: 100

Quote from: philipma1957 on December 23, 2014, 11:29:54 PM

yeah overclock is easy

I will find a screen shot

Can you please tell me how did you do that?
Because on Antminer's web
it say
Frequency
and
Voltage

Thanks!

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

look at the screen shot above

BTC-TMXSTAR

full member

Activity: 224

Merit: 100

Quote from: Biodom on December 23, 2014, 11:22:02 PM

Quote from: BTC-TMXSTAR on December 23, 2014, 11:12:49 PM

Hi!

My Antminer S3+ cant overclock, i dont know why.
Im using PuTTy and no chance

I followed this guide : https://bitcointalksearch.org/topic/bitmain-antminer-s3-support-and-overclocking-thread-699064

i selected 250M on putty and saved by typing !wq or :wq
http://prntscr.com/5jwz4x

Antminers website. (Still on 225M freq after rebooting.)
http://prntscr.com/5jx2mo

Please help me.

Thanks advance
and
God Bless!!!!!

what kind of firmware do you have?
if it is later firmware, you don't overclock by ssh, instead you go to the advanced tab in web gui, then choose one of the options :250, 237.5 or 225
save and apply

Hi!
Im using this Firmware from Bitmain, antMiner_S320141024.bin

Thank you very much for your reply!

God Bless!!!!!

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

yeah overclock is easy

I will find a screen shot

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: BTC-TMXSTAR on December 23, 2014, 11:12:49 PM

Hi!

My Antminer S3+ cant overclock, i dont know why.
Im using PuTTy and no chance

I followed this guide : https://bitcointalksearch.org/topic/bitmain-antminer-s3-support-and-overclocking-thread-699064

i selected 250M on putty and saved by typing !wq or :wq
http://prntscr.com/5jwz4x

Antminers website. (Still on 225M freq after rebooting.)
http://prntscr.com/5jx2mo

Please help me.

Thanks advance
and
God Bless!!!!!

what kind of firmware do you have?
if it is later firmware, you don't overclock by ssh, instead you go to the advanced tab in web gui, then choose one of the options :250, 237.5 or 225
save and apply

BTC-TMXSTAR

full member

Activity: 224

Merit: 100

Hi!

My Antminer S3+ cant overclock, i dont know why.
Im using PuTTy and no chance

I followed this guide : https://bitcointalksearch.org/topic/bitmain-antminer-s3-support-and-overclocking-thread-699064

i selected 250M on putty and saved by typing !wq or :wq
http://prntscr.com/5jwz4x

Antminers website. (Still on 225M freq after rebooting.)
http://prntscr.com/5jx2mo

Please help me.

Thanks advance
and
God Bless!!!!!

Topic: My Antminer S3+ cant overclock (Read 1258 times)