My antminer T15 is in infinite loop. read!

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

Logs show a lost fan so only 3 things that you can suspect are why it is always fan lost.

The fan that you replace is broken the 2nd one the terminal/port is damaged and the 3rd one is the control board.

Do you have a multimeter so that you can check if the terminal from control board to the fan has resistance because if it doesn't have resistance it means there is a connection problem?
You can fix it by replacing wires and port terminal only if you are sure the new fan is known working.

If this unit is t17 you can just bypass this issue by using BraiinsOS but your unit is not yet supported.

NelloToti

newbie

Activity: 11

Merit: 0

this is the updated log, the other is when I had the PSU damaged. I already changed the fans too but the error persists. As I said before. Remarks: I already changed the PSU with a new one and already replaced the fans with new ones.

Code:

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
Normal zone: 480 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197240K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32136K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090c424 (9234 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB)
.bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 19096K (cc85b000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 115/65, WL threshold: 4096, image sequence number: 453963119
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 867DAC7C-E888-49EF-8312-00AE3B6BE90A, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4251/1732, WL threshold: 4096, image sequence number: 656476120
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID F561CDB9-BB53-44A9-8C44-872D3E793D47, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab00d
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
[2023-03-24 03:57:47.628] Probing for an alive pool
[2023-03-24 03:57:47.629] initiate_stratum
[2023-03-24 03:57:47.629] initiate_stratum
[2023-03-24 03:57:47.632] initiate_stratum
[2023-03-24 03:57:48.119] LOW POWER MODE!
[2023-03-24 03:57:48.119] Switching to pool 2 stratum+tcp://sha256.poolbinance.com:8888 - first alive pool
[2023-03-24 03:57:48.120] in stratum_sthread
[2023-03-24 03:57:48.124] LOW POWER MODE!
[2023-03-24 03:57:48.125] Pool 1 stratum+tcp://bs.poolbinance.com:3333 alive, testing stability
[2023-03-24 03:57:48.125] in stratum_sthread
[2023-03-24 03:57:48.167] LOW POWER MODE!
[2023-03-24 03:57:48.168] Pool 0 stratum+tcp://sha256.poolbinance.com:443 alive, testing stability
[2023-03-24 03:57:48.168] in stratum_sthread
[2023-03-24 03:57:48.220] Pool 2 difficulty changed to 131072
[2023-03-24 03:57:48.221] Network diff set to 46.8T
[2023-03-24 03:57:48.228] Pool 1 difficulty changed to 131072
[2023-03-24 03:57:48.306] Pool 0 difficulty changed to 65536
[2023-03-24 03:57:48.351] POOL 2 support ab mode!
[2023-03-24 03:57:48.363] POOL 1 support ab mode!
[2023-03-24 03:57:48.475] POOL 0 support ab mode!
[2023-03-24 03:57:48.630] signal_work_update set work_update true
[2023-03-24 03:57:48.631] API: ignored invalid IPv4 address 'W:*' (as ::ffff:*.0.0.0)
[2023-03-24 03:57:48.631] Pool 0 stratum+tcp://sha256.poolbinance.com:443 stable for >120 seconds
[2023-03-24 03:57:48.632] Switching to pool 0 stratum+tcp://sha256.poolbinance.com:443
[2023-03-24 03:57:50.632] signal_work_update set work_update true
[2023-03-24 03:57:53.632] API running in IP access mode on port 4028 (8)
[2023-03-24 03:57:58.344] start listen on 6060 ...
[2023-03-24 03:58:20.640] signal_work_update set work_update true
[2023-03-24 03:58:50.649] signal_work_update set work_update true
[2023-03-24 03:59:22.658] signal_work_update set work_update true
[2023-03-24 03:59:51.441] Pool 0 difficulty changed to 16384
[2023-03-24 03:59:52.679] signal_work_update set work_update true
2023-03-24 03:57:28 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2023-03-24 03:57:28 driver-btm-soc.c:8125:bitmain_soc_init: T15
2023-03-24 03:57:28 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2023-03-24 03:57:28 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2023-03-24 03:57:28 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2023-03-24 03:57:28 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2023-03-24 03:57:28 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2023-03-24 03:57:28 driver-btm-soc.c:7729:_show_pool_info: Pool[0]: url = stratum+tcp://sha256.poolbinance.com:443, user = NTOTI.001
2023-03-24 03:57:28 driver-btm-soc.c:7729:_show_pool_info: Pool[1]: url = stratum+tcp://bs.poolbinance.com:3333, user = NTOTI.001
2023-03-24 03:57:28 driver-btm-soc.c:7729:_show_pool_info: Pool[2]: url = stratum+tcp://sha256.poolbinance.com:8888, user = NTOTI.001
2023-03-24 03:57:28 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2023-03-24 03:57:28 driver-btm-soc.c:8150:bitmain_soc_init: Miner compile time: Tue Aug 20 14:15:07 CST 2019 type: Antminer T15
2023-03-24 03:57:28 driver-btm-soc.c:8152:bitmain_soc_init: last commit version: a824717 commit time: 2019-08-02 14:19:26 build: 2019-08-20 14:25:02
2023-03-24 03:57:28 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2023-03-24 03:57:28 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:29 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:30 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:31 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:32 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:33 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:34 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:35 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:36 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:37 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:38 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:39 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:40 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:41 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:42 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:43 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:44 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:45 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:46 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:47 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-03-24 03:57:47 freq_tuning.c:3097:error_code_set: error_code = 10, chain = 255
2023-03-24 03:57:48 util.c:2178:process_version_mask: Pool 2 Verion num is 2
2023-03-24 03:57:48 util.c:2178:process_version_mask: Pool 1 Verion num is 2
2023-03-24 03:57:48 util.c:2178:process_version_mask: Pool 0 Verion num is 2
2023-03-24 03:57:48 driver-btm-soc.c:8824:send_job: Version num 2

Rodemi

jr. member

Activity: 46

Merit: 14

The log shows that the Fan lost or Fan speed low, the reason analysis and solution:
(1) The fan is not connected properly: the fan needs to be reconnected.
(2) The port connecting the control board to the fan is damaged: the control board needs to be repaired or replaced.
(3) The fan is damaged: the fan needs to be replaced.
If you make sure the fans are fine and connected correctly, but the miner still won't run, you should check the control board.
You can also check out ZEUS Troubleshooting.

NelloToti

newbie

Activity: 11

Merit: 0

The person who sold me the T15 sent me these two fans. maybe it's compatible. I've tried cleaning it using electrical contact cleaner but it didn't solve it.

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

Quote from: NelloToti on March 23, 2023, 07:53:12 AM

I changed the PSU and the loop stopped, and it turns on normally.. but it continued without mining because the "Fan lost" error remained.. I changed the fans and nothing works!

Have you replaced the fan with the same model? If it's a different fan it might be a compatibility issue.

Would you mind to check the control board fan terminals try to clean them with lacquer flo thinner or any board cleaner and then resolder them? Let's see if it solves your issue.

NelloToti

newbie

Activity: 11

Merit: 0

I changed the PSU and the loop stopped, and it turns on normally.. but it continued without mining because the "Fan lost" error remained.. I changed the fans and nothing works!

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

Quote from: NelloToti on January 26, 2023, 02:13:38 AM

still with the same error.. it seems that it does not mine without the PSU fans.. in the hashboards it appears "暂无数据！"

You don't have any other choice but to replace the fan because when you disconnect the other fans it runs normally but the logs show the fan is lost so it's not mining.

If you have a fan and extra PSU you can easily troubleshoot this issue without them for troubleshooting you are thinking it can fix in other ways.

If you don't have any technical knowledge or experience to repair units I'd suggest you hire a technician near your area there is a list on zeusBTC for repair centers and maybe one center is near in your area.

MinerMetrix

newbie

Activity: 6

Merit: 0

You will more than likely have to get working fans before it will hash again. But, if you do decide to fix it; be sure and upgrade your firmware since your commit and build time is older than the one posted at Bitmain.

T15 Firmware: https://shop.bitmain.com/support/download?archivesId=00720181211140753381G927zpWQ0672&type=0

NelloToti

newbie

Activity: 11

Merit: 0

still with the same error.. it seems that it does not mine without the PSU fans.. in the hashboards it appears "暂无数据！"

Code:

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197240K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32136K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 19096K (cc85b000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 109/61, WL threshold: 4096, image sequence number: 453963119
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 867DAC7C-E888-49EF-8312-00AE3B6BE90A, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4251/1732, WL threshold: 4096, image sequence number: 656476120
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID F561CDB9-BB53-44A9-8C44-872D3E793D47, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab00d
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
 [2023-01-26 07:08:38.275] Probing for an alive pool
 [2023-01-26 07:08:38.276] initiate_stratum
 [2023-01-26 07:08:38.276] initiate_stratum
 [2023-01-26 07:08:38.277] initiate_stratum
 [2023-01-26 07:08:38.605] LOW POWER MODE!
 [2023-01-26 07:08:38.606] Switching to pool 2 stratum+tcp://btc.viabtc.io:443 - first alive pool
 [2023-01-26 07:08:38.606] in stratum_sthread 
 [2023-01-26 07:08:38.606] Pool 2 difficulty changed to 16384
 [2023-01-26 07:08:38.608] Network diff set to 37.6T
 [2023-01-26 07:08:38.617] LOW POWER MODE!
 [2023-01-26 07:08:38.618] Pool 0 stratum+tcp://btc.viabtc.io:3333 alive, testing stability
 [2023-01-26 07:08:38.618] in stratum_sthread 
 [2023-01-26 07:08:38.618] Pool 0 difficulty changed to 16384
 [2023-01-26 07:08:38.706] POOL 2 support ab mode!
 [2023-01-26 07:08:38.722] POOL 0 support ab mode!
 [2023-01-26 07:08:39.276]  signal_work_update set work_update true
 [2023-01-26 07:08:39.278] API: ignored invalid IPv4 address 'W:*' (as ::ffff:*.0.0.0)
 [2023-01-26 07:08:39.278] Pool 0 stratum+tcp://btc.viabtc.io:3333 stable for >120 seconds
 [2023-01-26 07:08:39.278] Switching to pool 0 stratum+tcp://btc.viabtc.io:3333
 [2023-01-26 07:08:44.278] API running in IP access mode on port 4028 (9)
 [2023-01-26 07:08:48.945] start listen on 6060 ...
2023-01-26 07:08:19 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2023-01-26 07:08:19 driver-btm-soc.c:8125:bitmain_soc_init: T15
2023-01-26 07:08:19 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2023-01-26 07:08:19 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2023-01-26 07:08:19 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2023-01-26 07:08:19 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2023-01-26 07:08:19 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2023-01-26 07:08:19 driver-btm-soc.c:7729:_show_pool_info: Pool[0]: url = stratum+tcp://btc.viabtc.io:3333, user = NelloToti.001
2023-01-26 07:08:19 driver-btm-soc.c:7729:_show_pool_info: Pool[1]: url = stratum+tcp://btc.viabtc.io:25, user = NelloToti.001
2023-01-26 07:08:19 driver-btm-soc.c:7729:_show_pool_info: Pool[2]: url = stratum+tcp://btc.viabtc.io:443, user = NelloToti.001
2023-01-26 07:08:19 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2023-01-26 07:08:19 driver-btm-soc.c:8150:bitmain_soc_init: Miner compile time: Tue Aug 20 14:15:07 CST 2019 type: Antminer T15
2023-01-26 07:08:19 driver-btm-soc.c:8152:bitmain_soc_init: last commit version: a824717 commit time: 2019-08-02 14:19:26 build: 2019-08-20 14:25:02
2023-01-26 07:08:19 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2023-01-26 07:08:19 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:20 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:21 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:22 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:23 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:24 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:25 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:26 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:27 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:28 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:29 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:30 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:31 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:32 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:33 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:34 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:35 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:36 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:37 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:38 driver-btm-soc.c:7347:check_fan_multi: Error!!! Fan lost!
2023-01-26 07:08:38 freq_tuning.c:3097:error_code_set: error_code = 10, chain = 255
2023-01-26 07:08:38 util.c:2178:process_version_mask: Pool 2 Verion num is 2
2023-01-26 07:08:38 util.c:2178:process_version_mask: Pool 2 Verion num is 2
2023-01-26 07:08:38 util.c:2178:process_version_mask: Pool 0 Verion num is 2
2023-01-26 07:08:38 util.c:2178:process_version_mask: Pool 0 Verion num is 2
2023-01-26 07:08:39 driver-btm-soc.c:8824:send_job: Version num 2

ic4ntfeelmyf4ce

newbie

Activity: 1

Merit: 0

Quote from: NelloToti on January 25, 2023, 01:31:01 PM

New discovery!.. I opened the PSU and removed one of the fans from it and it turned on normally too... can I say that the problem is in the PSU? Is there any kind of fix? apparently the PSU is not holding up .. when the start miner. it restarts again..

You can run it with one fan short on the PSU, supplement the cooling with an adequate external fan and put the miner low to the ground. Tip: Lay the miner sideways with the PSU side down, ensuring your heat sinks are face-up and won't allow failing solder to cause the heat sink to fall off and short out the unit. Sometimes this can also re-flow failing solder/solder balls and fix over-voltage issues.

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

Quote from: NelloToti on January 25, 2023, 01:31:01 PM

New discovery!.. I opened the PSU and removed one of the fans from it and it turned on normally too... can I say that the problem is in the PSU? Is there any kind of fix? apparently the PSU is not holding up .. when the start miner. it restarts again..

Possible it could be PSU but without some tools like a power meter where you can see how much wattage is the miner pulling
and you can monitor the power and compare it with or without the fan.

But if it's a PSU maybe the PSU can't provide enough power which is why the miner didn't work while all fans are connected.
How about removing one of the hashboard temporarily and let see if it will run normally? If it's run normally then try to pull the kernel logs again and post it here(and possible it's PSU issue).

NelloToti

newbie

Activity: 11

Merit: 0

New discovery!.. I opened the PSU and removed one of the fans from it and it turned on normally too... can I say that the problem is in the PSU? Is there any kind of fix? apparently the PSU is not holding up .. when the start miner. it restarts again..

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

Quote from: NelloToti on January 23, 2023, 09:11:58 PM

I've cleaned everything, I've tested if there's any kind of short with all the pins (4) (on the board and also on the fan) both are normal. the miner turns on with only 1 fan, both the upper and lower, they turn on normally but only 1 at a time. and both ports on the card work, but one at a time...

If you don't have a solution, the way will be to buy 2 fans, there's no way.

You can use fan simulator but the problem is how can you cooldown the unit with only one fan. Mineral oil is optional but it would be more expensive than replacing it with new fan.

So, there is no other way but to replace them with working fan.

NelloToti

newbie

Activity: 11

Merit: 0

I've cleaned everything, I've tested if there's any kind of short with all the pins (4) (on the board and also on the fan) both are normal. the miner turns on with only 1 fan, both the upper and lower, they turn on normally but only 1 at a time. and both ports on the card work, but one at a time...

If you don't have a solution, the way will be to buy 2 fans, there's no way.

mikeywith

legendary

Activity: 2394

Merit: 6581

be constructive or S.T.F.U

Quote from: NelloToti on January 23, 2023, 06:35:47 PM

I tested on the multimeter if the black and red were touching but they are not. and if the fans are shorted why do they come on when i only connect 1?

Only the black and red? did you not test all 4 wires against each other?

Does the miner power on with just 1 fan regardless of whether it's the top or bottom fan? also what is the result of switching the fan to the other port on the control board, does it change anything, or as long as 'any' single fan is plugged in 'any' port the miner works fine?

Anyway, the kernel log you posted confirms that you have a bad fan (or two), the simplest and cheapest thing would be 2 new fans, if the problem persists -- you have a bad control board.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: mikeywith on January 23, 2023, 05:29:09 PM

It's likely the fan is shorting the control board, you need to check the fan wires to make sure none of them is touching one another, could also be the plugs themselves, they could have melted inside and now are shorted, it will be near impossible and not worth the time to inspect those plugs, just get a replacement fan to make sure the issue is fan itself and not the control board.

I would swap in a new fan.

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

Can you try to check the fan terminal/plugs/connectors maybe there is something under the connectors or terminals it could be moist/rust/corrosion that turns the fan shorted?

I suggest try to brush it with lacquer flo thinner or isopropyl alcohol to help remove and clean them and then use a multimeter to test if they are shorted too.

Another thing that I think is that maybe one of the fan wire the positive and negative wire are swap the connection from connector to the control board terminal should be positive to positive and negative to negative.

NelloToti

newbie

Activity: 11

Merit: 0

I tested on the multimeter if the black and red were touching but they are not. and if the fans are shorted why do they come on when i only connect 1?

mikeywith

legendary

Activity: 2394

Merit: 6581

be constructive or S.T.F.U

It's likely the fan is shorting the control board, you need to check the fan wires to make sure none of them is touching one another, could also be the plugs themselves, they could have melted inside and now are shorted, it will be near impossible and not worth the time to inspect those plugs, just get a replacement fan to make sure the issue is fan itself and not the control board.

NelloToti

newbie

Activity: 11

Merit: 0

the problem continues, the only thing that has changed is that it is now restarting every 3 seconds.. I've already measured the multimeter and the 12V + and 12V- are coming

Topic: My antminer T15 is in infinite loop. read! (Read 268 times)