Topic: My first mining rig - page 2. (Read 1596 times)
i have just a question. Can i mine with older hardware, like socket 775 and ddr2 - motherboard Asus M2N @ 3-4 gpus? it is compatible? thanx a lot
Its hard just to tell with these information until getting full information but as I experienced myself before was the combination of cards.
I used 7990 and 7950 together and got 1.5 Mhs where with only 7990 I use to get 1.2+ mhs and 7950 using single I use to get 700+ so I decided to make similar and sold my 7950 and bought 7990 again and got actual 1.2*2=2.5 (Its not math but its what I am getting) so I suggest you to try using single card each time and check if same thing happens what happened to me then I will suggest you to get either 290 or 280 but the same.
I used 7990 and 7950 together and got 1.5 Mhs where with only 7990 I use to get 1.2+ mhs and 7950 using single I use to get 700+ so I decided to make similar and sold my 7950 and bought 7990 again and got actual 1.2*2=2.5 (Its not math but its what I am getting) so I suggest you to try using single card each time and check if same thing happens what happened to me then I will suggest you to get either 290 or 280 but the same.
Hello,
this is my rig
Mother board: Gigabyte 970 a-ud3p
cpu: amd athlon II x2 270
Memory: 8gb
psu: evga 1000g2 supernova 80 gold
grafic card 1: GV-R929OC-4GD-GA
grafic card 2: GV-R928XOC-3GD
hdd: 2.5 sata 80 gb
But i can only get 859 kh/s with the 290 and get only 721 with the 280x
am i doing some thing wrong
i am using msi afterburner with this setings
grafic card 1 290: core 980 memory 1499
grafic car 2 280x: core 1049 memory 1500
i read that the 290 can get 890 kh/s and the 280x 760 kh/s what am i doing wrong i can't get more than the values i put above
Not be determined by these information,Post your full config. this is my rig
Mother board: Gigabyte 970 a-ud3p
cpu: amd athlon II x2 270
Memory: 8gb
psu: evga 1000g2 supernova 80 gold
grafic card 1: GV-R929OC-4GD-GA
grafic card 2: GV-R928XOC-3GD
hdd: 2.5 sata 80 gb
But i can only get 859 kh/s with the 290 and get only 721 with the 280x
am i doing some thing wrong
i am using msi afterburner with this setings
grafic card 1 290: core 980 memory 1499
grafic car 2 280x: core 1049 memory 1500
i read that the 290 can get 890 kh/s and the 280x 760 kh/s what am i doing wrong i can't get more than the values i put above
Post your full config.
Hello,
this is my rig
Mother board: Gigabyte 970 a-ud3p
cpu: amd athlon II x2 270
Memory: 8gb
psu: evga 1000g2 supernova 80 gold
grafic card 1: GV-R929OC-4GD-GA
grafic card 2: GV-R928XOC-3GD
hdd: 2.5 sata 80 gb
But i can only get 859 kh/s with the 290 and get only 721 with the 280x
am i doing some thing wrong
i am using msi afterburner with this setings
grafic card 1 290: core 980 memory 1499
grafic car 2 280x: core 1049 memory 1500
i read that the 290 can get 890 kh/s and the 280x 760 kh/s what am i doing wrong i can't get more than the values i put above
this is my rig
Mother board: Gigabyte 970 a-ud3p
cpu: amd athlon II x2 270
Memory: 8gb
psu: evga 1000g2 supernova 80 gold
grafic card 1: GV-R929OC-4GD-GA
grafic card 2: GV-R928XOC-3GD
hdd: 2.5 sata 80 gb
But i can only get 859 kh/s with the 290 and get only 721 with the 280x
am i doing some thing wrong
i am using msi afterburner with this setings
grafic card 1 290: core 980 memory 1499
grafic car 2 280x: core 1049 memory 1500
i read that the 290 can get 890 kh/s and the 280x 760 kh/s what am i doing wrong i can't get more than the values i put above
Jump to: