Pages:
Author

Topic: My initial Radeon HD 7970 mining benchmarks - page 9. (Read 46791 times)

hero member
Activity: 518
Merit: 500
now this card is out.. how about some ++real++ benchmarks?
this thing has 500 more sp than the 6990 - how can it possibly be slower?Huh


LOL you don't know a thing about mining, do you ?

6990 has 3 072 or 2*1536

5970 has 2*1600 or 3200 shaders

7970 has 2048 shaders

5870 has 1600 shaders

7990 supposedly has 4096 shaders ?

newbie
Activity: 28
Merit: 0
now this card is out.. how about some ++real++ benchmarks?
this thing has 500 more sp than the 6990 - how can it possibly be slower?Huh
hero member
Activity: 896
Merit: 1000
Seal Cub Clubbing Club
Has there been any further improvement/refinement?
newbie
Activity: 19
Merit: 0
impressive numbers, when the prices goes down $400 these cards should be hot
newbie
Activity: 43
Merit: 0
legendary
Activity: 1162
Merit: 1000
DiabloMiner author
newbie
Activity: 43
Merit: 0
Edit: You know, I just noticed the op post said GPU threads had a viable increase beyond two. Huh. I should go see if that is worth abuse, I never got better performance beyond 2 on DM (its hardwired to 2, and was the first miner to abuse that trick).

I just tried changing EXECUTION_TOTAL from 2 to 3 on my machine and the hashrate went up slightly from 662.8 MH/s to 666.0 MH/s.
donator
Activity: 1218
Merit: 1079
Gerald Davis
Curious. What intensity did you run it at on cgminer? I figure the 7970 will be the first GPU to benefit from -I 10. On your screenshot it was only intensity 7!

Thanks for the tip. I just tried -I 10 but it does not seem to have a significant effect on the hashing rate when compared to -I 7.

You should try -I 8 and 9.  It should be about 5% better.
newbie
Activity: 43
Merit: 0
Curious. What intensity did you run it at on cgminer? I figure the 7970 will be the first GPU to benefit from -I 10. On your screenshot it was only intensity 7!

Thanks for the tip. I just tried -I 10 but it does not seem to have a significant effect on the hashing rate when compared to -I 7.
sr. member
Activity: 274
Merit: 250
If sommeone will pull out somme more mhash`s from GCN, it could be best choice.
The prize will cut it a bit untill NV will show its babby.
Theres always hope, that somme gamers will sell somme old and "crappy"HD58XX/5970 Wink to buy HD79XX Smiley Cool
full member
Activity: 136
Merit: 100
The card has been tested under full load pulling 192 watt by a hardware review site who had their hands on the first cards
That full load was doing a heavy game for a certain amount of time, they also mentioned that if you overclock the card it will use more then 200 watt.
And including burnin with furmark now do not tell me you do not know how powerfull furmark is
Its actually more stressing cards then they will ever do in real time usage including mining

Mining pulls significantly more performance than games do, and only slightly below Furmark. ~250w with overclock sounds correct for mining.
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
Curious. What intensity did you run it at on cgminer? I figure the 7970 will be the first GPU to benefit from -I 10. On your screenshot it was only intensity 7!
omo
full member
Activity: 147
Merit: 100
good! I can't wait to buy one
hero member
Activity: 774
Merit: 500
Lazy Lurker Reads Alot
The card has been tested under full load pulling 192 watt by a hardware review site who had their hands on the first cards
That full load was doing a heavy game for a certain amount of time, they also mentioned that if you overclock the card it will use more then 200 watt.
And including burnin with furmark now do not tell me you do not know how powerfull furmark is
Its actually more stressing cards then they will ever do in real time usage including mining

This site has allways been in this respect good they test every aspect, and i believe they did more testing then others
So there is no doubt about the results, these guys test with better equipment then a kill-a-watt

Onto the answer with the threads running in the old stucture the alu where not capable of doing more then 2 threads
the new GCN seems to make it possible to make better use of the alu's is stated by amd.
So somehow you can get the card to set every and all alu to work
Which was simply not possible on the vliw architecture
The big increase in numbers on the review (most games) shows clearly that this card easily does up to 33% better then the 6970
I think for the coders out their this card poses a real challenge to get more out of it then with previous cards.
Nevertheless we have to wait what prices it will get at, after the initial run on them because i already know many of the gamers i talked to want 1 or more of them as soon as they can
legendary
Activity: 1162
Merit: 1000
DiabloMiner author
Downloaded the sources for diablominer and compiled them. ~650MH/s with the default diablominer settings and the card OC'd @ 1125/975MHz:

~530MH/s at standard clocks:

WTF and thats with -v 1? 79xx could be glorious if I can find the right settings.

Edit: You know, I just noticed the op post said GPU threads had a viable increase beyond two. Huh. I should go see if that is worth abuse, I never got better performance beyond 2 on DM (its hardwired to 2, and was the first miner to abuse that trick).
full member
Activity: 202
Merit: 100
Looks like the 5970 has lost it's crown. I'd be surprised if that card pulled more than 200 watts.

Why & Why?

7970
650 MH/s
200W?
$549+

5970
750MH/s
250W
$300 (used)

.......

Guess we won't know for sure until someone gets a Kill-a-watt (hint hint OP Smiley ).

I thought that because my numbers were wrong. I was thinking this card would pull about 200(because I thought it's TDP was 150) and it's over clocked. My own 5970 pull around 300 to get 750 mh.
donator
Activity: 1218
Merit: 1079
Gerald Davis
Looks like the 5970 has lost it's crown. I'd be surprised if that card pulled more than 200 watts.

Why & Why?

7970
650 MH/s
200W?
$549+

5970
750MH/s
250W
$300 (used)

Now the 7990 will likely dethrone the 5970.  I would guess (based on 7970 results) it may w/ some optimization be the first 1 GH/s card.

As for the wattage.  It is rated for 250W and other benchmarks have put it at 230W under full load.  While it might be less while mining (if mem is downclocked) what you make you think it would be 30W less while also overclocked 20%+?

Guess we won't know for sure until someone gets a Kill-a-watt (hint hint OP Smiley ).
full member
Activity: 202
Merit: 100
Looks like the 5970 has lost it's crown. I'd be surprised if that card pulled more than 200 watts.
legendary
Activity: 1022
Merit: 1000
BitMinter
Thanks for the pics  Wink looks good !
newbie
Activity: 38
Merit: 0
This is most interesting. That'll be a good run, indeed, when the price matures.
Pages:
Jump to: