my long story with Bitmain and bitmainwarranty and S9 - page 3.

italianMiner72

hero member

Activity: 910

Merit: 511

Quote from: philipma1957 on June 05, 2017, 10:24:56 AM

Quote from: italianMiner72 on June 05, 2017, 04:54:05 AM

Quote from: Liquid71 on June 05, 2017, 03:53:27 AM

Try hosting at Giga Watt they do on site repairs for all Bitmain miners, no shipping back to China!

this is a real good tip!!!
maybe do you know where are Giga Watt farm placed??
USA??? EU? CINA???

Giga-watt is in the usa in the state of washington

thank you!
i will ask if it's possible to ship there and how much does it cost...
but i think wil be too much expensive!
let's check if they will open a farm in EU!

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: italianMiner72 on June 05, 2017, 04:54:05 AM

Quote from: Liquid71 on June 05, 2017, 03:53:27 AM

Try hosting at Giga Watt they do on site repairs for all Bitmain miners, no shipping back to China!

this is a real good tip!!!
maybe do you know where are Giga Watt farm placed??
USA??? EU? CINA???

Giga-watt is in the usa in the state of washington

italianMiner72

hero member

Activity: 910

Merit: 511

Quote from: Liquid71 on June 05, 2017, 03:53:27 AM

Try hosting at Giga Watt they do on site repairs for all Bitmain miners, no shipping back to China!

this is a real good tip!!!
maybe do you know where are Giga Watt farm placed??
USA??? EU? CINA???

Liquid71

hero member

Activity: 835

Merit: 1000

There is NO Freedom without Privacy

Try hosting at Giga Watt they do on site repairs for all Bitmain miners, no shipping back to China!

leowonderful

legendary

Activity: 1624

Merit: 1130

Bitcoin FTW!

Apparently bitmainwarranty is going to be merging with myrig or something like that based off of the myrig guy's posts. It's an interesting service they offer, I'd look into their physical hosting once they get miners back into their marketplace.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: mamiakimo on June 01, 2017, 08:35:07 AM

i don't get there answer yet Undecided

Well I am earning on the site I am more then 0.01 earned which is nice but no info on status of the r4 board

mamiakimo

full member

Activity: 197

Merit: 100

i don't get there answer yet Undecided

mamiakimo

full member

Activity: 197

Merit: 100

do you think i have a problem on controller?

mamiakimo

full member

Activity: 197

Merit: 100

Quote from: smutboy420 on May 30, 2017, 01:18:19 PM

Ya if you have had that much bad luck with the same board in the same miner you should start trying to narrow down the cause of the problem and start looking at your power supplys as well as all the wires and plugs going to the board in ? that keeps dieing on you. esp now that they have had to of been plugged in and unplugged a few times now just from dealing with the board issue so many times. PCI-e female plugs are only rated for a maximum life of 30 cycles of plugging them in and unplugging them before failure even in the best conditions. They really are not meant to be unplugged more then a few times in their life before they need to be repined. and really not even meant to be pushing as much amps as they do when used in something as power hungry as an s9

and if its not a power supply issue or plug and wireing issue I would start looking at things such as the fan or what sort of temps the air intake air is at where ever you are running the miner that keeps haveing a board die on you over and over.

Or you could just have really really bad luck. Which can happen.

before i get the board i moved this machine to new apartment that have more good air flow because we are on summer now
and changed the PSU too from EVGA 1600G2 to APW3 which i get it from one month from bitmain ( i have only one APW3 )
when this board stopped hashing i tested it on another data cable and start the machine with it only but it still not working

mamiakimo

full member

Activity: 197

Merit: 100

Quote from: ninobtcx on May 30, 2017, 12:16:50 PM

i think problem is from your psu, i have 3 s9 but all of them are working fine for me
its better that you chenge your psu
another possibility is from power oscillation

before i connect the new board i changed the place of this machine to another apartment and i connect it to APW3
the evga 1600G2 that used with it before is used now with another machine with no issues

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

ask if they might give you mining comp

myrig is the forum member connected with bitmainwarranty he is doing a beta program.

https://bitcointalksearch.org/user/myrig-383527

so far while waiting on my dead r4 board I have earned more then 0.011

smutboy420

full member

Activity: 341

Merit: 100

Ya if you have had that much bad luck with the same board in the same miner you should start trying to narrow down the cause of the problem and start looking at your power supplys as well as all the wires and plugs going to the board in ? that keeps dieing on you. esp now that they have had to of been plugged in and unplugged a few times now just from dealing with the board issue so many times. PCI-e female plugs are only rated for a maximum life of 30 cycles of plugging them in and unplugging them before failure even in the best conditions. They really are not meant to be unplugged more then a few times in their life before they need to be repined. and really not even meant to be pushing as much amps as they do when used in something as power hungry as an s9

and if its not a power supply issue or plug and wireing issue I would start looking at things such as the fan or what sort of temps the air intake air is at where ever you are running the miner that keeps haveing a board die on you over and over.

Or you could just have really really bad luck. Which can happen.

ninobtcx

sr. member

Activity: 418

Merit: 262

i think problem is from your psu, i have 3 s9 but all of them are working fine for me
its better that you chenge your psu
another possibility is from power oscillation

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote

i send message to bitmainwarranty to purchase a new board
i get answer from Ashli told me it will cost 175$ + 25$ for shipping
i paid using BTC
and after that he told me that he told me wrong price and the correct price is 550$

Got a hunch the $175 would have been a repair price.

I was wondering why when I sent in a s9b13 board for repair Ashi also provided quotes for 550 & 600MHz spare boards. Perhaps was from your input.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

I have struggled with s-9 gear and with r4 gear.

at the moment I have an r4 blade at bitmainwarranty.

they have had it since May 25th 1Z4AR6880343709452

this is a short time due to Holiday.

I am getting comp mining credit from host.myrig

mamiakimo

full member

Activity: 197

Merit: 100

Quote from: Subw on May 30, 2017, 02:12:58 AM

pretty bad luck. are you sure your PSUs are OK?

EVGA 1600 G2 for 5 months
then replaced to APW3

Subw

hero member

Activity: 672

Merit: 500

pretty bad luck. are you sure your PSUs are OK?

mamiakimo

full member

Activity: 197

Merit: 100

hi,

i have 7 S9 and 2 R4
all of them working fine except first one S9 Batch 9
after 2 weeks from getting it i lost one board and they repaired it under warranty
after 2 months it stopped hashing again ( same board )
they told me it out of warranty so i send it to paid repair
after i get it and install it the all machine stopped working!
after reset i found the 3 boards stopped!!
i told them and they told me to send the 3 boards to free repair and they will cover the shipment cost
after 2 months one of them stopped again!
i send it to repair but they told me it damaged and cannot be repair or replace because it out of warranty
i told them to give me new board but they told me to purchase anew one from bitmainwarranty

i send message to bitmainwarranty to purchase a new board
i get answer from Ashli told me it will cost 175$ + 25$ for shipping
i paid using BTC
and after that he told me that he told me wrong price and the correct price is 550$
i told him to recover my BTC and i don't need this board
he told me ( My apologies I will go ahead and just ship the order to you. )

after i get my new board and installed it by 8 horus it stopped hashing!
i send bitmainwarranty a message from 2 days and i don't get response until now

Topic: my long story with Bitmain and bitmainwarranty and S9 - page 3. (Read 4759 times)