Topic: my pc shutdown when im put the second rx470.. please help me - page 2. (Read 1498 times)
Your PSU is very very weak, only 18A @12V. So it can deliver only 216W for GPU. More than one gpu is suicide, although I would not use this PSU for mining even with one card
This sounds like it is a driver issue! Remove in safe mode and re-install as administrator.
Reboot.
After that go to AMD Radeon Settings and disable crossfire if activated.
Reboot.
After that go to AMD Radeon Settings and disable crossfire if activated.
MY PSU
Please help me
Please help me
1. Make sure psu 450w and above for rates 80 plus bronze.
2. Uninstall catalyst and delete all existing drivers and re install
3. Undervolt the card
4. Worse case revisit your ROM and see if you have flash correct and if all fails reflash to original
5. Turn all pci to X1 AGP
2. Uninstall catalyst and delete all existing drivers and re install
3. Undervolt the card
4. Worse case revisit your ROM and see if you have flash correct and if all fails reflash to original
5. Turn all pci to X1 AGP
how im can do that ?
Where do I setup?
Thanks
Almir
Where do I setup?
Thanks
Almir
I think put in crossfire.
I think put in crossfire.
im have a psu of 500w
but im turn on a second psu and put thw second video card in this psu! and the problem persists
im not using overclock
what is undervolt the card?
Turn all pci to X1 AGP ==== what is that?
obs : im need to active the crossfire?
Please see the log bellow
22:01:20:176 930 GPU #0: name: Ellesmere, 4096 MB available, 32 compute units
22:01:20:176 930 GPU #1: name: Ellesmere, 4096 MB available, 32 compute units
22:01:20:176 930 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
22:01:20:176 930 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
22:01:20:176 930 Incorrect ETH shares: none
22:01:20:176 930 Pool switches: ETH - 0, DCR - 0
22:01:20:192 930 Unsupported Overdrive version 7
22:01:20:192 930 Unsupported Overdrive version 7
Thanks
Almir
but im turn on a second psu and put thw second video card in this psu! and the problem persists
im not using overclock
what is undervolt the card?
Turn all pci to X1 AGP ==== what is that?
obs : im need to active the crossfire?
Please see the log bellow
22:01:20:176 930 GPU #0: name: Ellesmere, 4096 MB available, 32 compute units
22:01:20:176 930 GPU #1: name: Ellesmere, 4096 MB available, 32 compute units
22:01:20:176 930 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
22:01:20:176 930 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
22:01:20:176 930 Incorrect ETH shares: none
22:01:20:176 930 Pool switches: ETH - 0, DCR - 0
22:01:20:192 930 Unsupported Overdrive version 7
22:01:20:192 930 Unsupported Overdrive version 7
Thanks
Almir
1. Make sure psu 450w and above for rates 80 plus bronze.
2. Uninstall catalyst and delete all existing drivers and re install
3. Undervolt the card
4. Worse case revisit your ROM and see if you have flash correct and if all fails reflash to original
5. Turn all pci to X1 AGP
2. Uninstall catalyst and delete all existing drivers and re install
3. Undervolt the card
4. Worse case revisit your ROM and see if you have flash correct and if all fails reflash to original
5. Turn all pci to X1 AGP
1. Make sure psu 450w and above for rates 80 plus bronze.
2. Uninstall catalyst and delete all existing drivers and re install
3. Undervolt the card
4. Worse case revisit your ROM and see if you have flash correct and if all fails reflash to original
5. Turn all pci to X1 AGP
2. Uninstall catalyst and delete all existing drivers and re install
3. Undervolt the card
4. Worse case revisit your ROM and see if you have flash correct and if all fails reflash to original
5. Turn all pci to X1 AGP
Underclock everything to consume less Power Just to test
What power supply, wattage?
Dear Friends
help me
Im have one Motherboard gigabyte 790A-DS3P
and two sapphiore RX470 OC of 4gb
im using windows 10
with one cards all works fine
im put the 2nd video card
all is ok
the pc recognize the 2 video cards
And when starting the claymore's the pc shutdown
what im need to do ?
thanks
Almir
help me
Im have one Motherboard gigabyte 790A-DS3P
and two sapphiore RX470 OC of 4gb
im using windows 10
with one cards all works fine
im put the 2nd video card
all is ok
the pc recognize the 2 video cards
And when starting the claymore's the pc shutdown
what im need to do ?
thanks
Almir
Jump to: