i would suggest you get a 15-20 dollar kwatt meter and see what you are pulling at the meter.
If you are over 1100 watts and have been using that psu for a long time at say 900 watts the psu may not be up to the task. so pull a gpu to see how it runs.
Topic: My rig freezes when mining eth - page 2. (Read 310 times)
You need at minimum 6*8GB of virtual memory ...
And mining @stock is just a joke, stock voltage is just burning your rig ...
And mining @stock is just a joke, stock voltage is just burning your rig ...
Add way more virtual memory. What do you need drive space for anyway.
More than 32Gb??? How much? 64Gb? I don't know if there is space in disk disk for that
Add way more virtual memory. What do you need drive space for anyway.
virtual memory?
32000 mbclock to high?
Gpus untouched, mining at stockpower supply is maxed?
Don't know what that means
you are only mining with a single 4 gig ram id would increase the virtual memory in windows
Done it and tried more ram
virtual memory?
clock to high?
power supply is maxed?
you are only mining with a single 4 gig ram id would increase the virtual memory in windows
clock to high?
power supply is maxed?
you are only mining with a single 4 gig ram id would increase the virtual memory in windows
I have a mining rig with:
With 4gpu it works completely stable, after adding the fifth one, no matter which one, it freezes after 2/3 min.
At first it threw Video TDR blue screen failures before restarting, then started to just freeze. A couple of times, my MB bios CMO got cleared.
I have above 4G enabled, pcie latency 96, gen 2/3.
Latest Adrenaline drivers, and gpu stock BIOS (never oc)
I am using Claymore v15.0 with the suggested env vars set
Windows 10 PRO updated version
Ive tried:
Any ideas?
- MSI Z270 Gaming Plus
- EVGA Supernova G2 1300W
- 6 Rx 570 8G
- 4Gb RAM
With 4gpu it works completely stable, after adding the fifth one, no matter which one, it freezes after 2/3 min.
At first it threw Video TDR blue screen failures before restarting, then started to just freeze. A couple of times, my MB bios CMO got cleared.
I have above 4G enabled, pcie latency 96, gen 2/3.
Latest Adrenaline drivers, and gpu stock BIOS (never oc)
I am using Claymore v15.0 with the suggested env vars set
Windows 10 PRO updated version
Ive tried:
- Replacing PCIE risers
- Switching pcie gen from 3 to 2
- Adding 8gb more ram
- Removing straps from Claymores configuration
- Switching from Claymore to Phoenix miner
- Upgrading Adrenaline driver to latest beta version
- Upgrading Windows virtual memory from 16Gb to 32Gb
Any ideas?
Jump to: