Need help in MEW to send Token | Bitcointalksearch.org

mr_denz

member

Activity: 378

Merit: 10

Quote from: DanTeMessy on November 18, 2017, 03:45:48 AM

Hi all

i have a problem in send token from MEW to exchange sites
even to send token to the original wallet of the token like PIGGY coin wallet .

i have some ETH in MEW for gas and every thing looks OK
when i click Generate Transaction i got this message :

""Please enter a valid address""

Wish you can help me Roll Eyes

I think it's a different coin. not a PIGGY coin like you mean. try checking the contract addres, and checking in etherdelta. it will be seen if it is actually a PIGGIES coin. I had experienced this before. hopefully can help

czhen

member

Activity: 308

Merit: 10

maybe your piggy address is wrong or this is just a network problem that is being interrupted. try checking your piggy address again

tanghere02

sr. member

Activity: 518

Merit: 250

Before making any transactions or making a mistake review all the time your wallet address and make sure it is the correct one. I also think you just entered an incomplete wallet address OP; I also made the same mistake a few months ago and keep on going back unto where I was wrong and found out I miss a letter probably when I copied the wallet address.

dark1234

full member

Activity: 1134

Merit: 167

This happens a lot at this end because the coins have the same name. Maybe the name of the currency you're drawing is not the same as your coin.
as PIGGY has some of the same things
there is PIGGY TOKEN and PIGGY COIN
If not then check the gas limit maybe you need to change it

alexwon

newbie

Activity: 26

Merit: 0

Quote from: pealr12 on November 18, 2017, 03:08:51 PM

It seems you have piggy token but not the real coin itself your case i like cryptonex coin.
Everytime i get that message also when i try to send my cryptonex to an exchange

I thought the same, but Cryptonex support told me, that we have tokens which can't be placed on coin exchanges.
"Later Cryptonex team will announce a new bounty program and you will be able to exchange your tokens for CNX coins without any conditions.
The rate will be announced later"

DanTeMessy

member

Activity: 66

Merit: 10

Quote from: dustboy on November 21, 2017, 04:14:06 AM

I'm sure you are trying to send piggies which is an ETH token to a PIGGYCOIN which is not an ETH token. Obviously, you will not able to do it ever as they are different coin.
The piggy you have should be from this Piggies - Charitable - Potentially profitable - Everybody wins while the address you get from exchange is PIGGY from this thread [ANN] New Piggycoin [PIGGY] | 3% interest | Web PiggyBank | Android PiggyBank

Case closed

Yep, That's it
thanks for help

and thanks for everyone, try to help

Bitmedrano040117

sr. member

Activity: 462

Merit: 251

Quote from: DanTeMessy on November 18, 2017, 03:45:48 AM

Hi all

i have a problem in send token from MEW to exchange sites
even to send token to the original wallet of the token like PIGGY coin wallet .

i have some ETH in MEW for gas and every thing looks OK
when i click Generate Transaction i got this message :

""Please enter a valid address""

Wish you can help me Roll Eyes

In the first place I think you've placed the wrong address that's why its not transferring properly mate. or there maybe a problem in the exchange that you are going to transfer it.

dustboy

hero member

Activity: 1022

Merit: 517

I'm sure you are trying to send piggies which is an ETH token to a PIGGYCOIN which is not an ETH token. Obviously, you will not able to do it ever as they are different coin.
The piggy you have should be from this Piggies - Charitable - Potentially profitable - Everybody wins while the address you get from exchange is PIGGY from this thread [ANN] New Piggycoin [PIGGY] | 3% interest | Web PiggyBank | Android PiggyBank

Case closed

achlyss

full member

Activity: 607

Merit: 106

Quote from: DanTeMessy on November 18, 2017, 03:45:48 AM

Hi all

i have a problem in send token from MEW to exchange sites
even to send token to the original wallet of the token like PIGGY coin wallet .

i have some ETH in MEW for gas and every thing looks OK
when i click Generate Transaction i got this message :

""Please enter a valid address""

Wish you can help me Roll Eyes

damn it, your address not mew, just replace your address with your mew, and then trx run normally

Lanatsa

hero member

Activity: 2968

Merit: 687

Quote from: Boseda on November 18, 2017, 03:43:43 PM

Quote from: DanTeMessy on November 18, 2017, 03:45:48 AM

Hi all

i have a problem in send token from MEW to exchange sites
even to send token to the original wallet of the token like PIGGY coin wallet .

i have some ETH in MEW for gas and every thing looks OK
when i click Generate Transaction i got this message :

""Please enter a valid address""

Wish you can help me Roll Eyes

I am sure you entered the wrong address since ETH addresses start with '0x...'. Take the time to check again the address you have to send money. Also make sure you are talking about the same 'Piggy' token listed on that exchange since there are so many coins and tokens out there that some could share the same name or the same Symbol, but aren't the same token.

Its not necessary to put up casual ETH address that starts with 0x since he already set it up on Piggy transfer which means you would really need to put up Piggy address on that input bar.Im sure that he do put the right address since the abbreviation of piggycoin is just exact if we do try to base on the link that he do gave above.Its just the same which i do really have confusion on this one why it isnt been recognized.

NobleNation

newbie

Activity: 27

Merit: 0

Clearly the "TO" address is wrong. Ethereum addresses start with "0x" and is followed by 40 hexadecimal (numbers 0 to 9 and the letters A to F upper or lower case) characters.

Token transfers will execute a contract, hence usually require more than the minimum gas of 21000.

But before worrying about this, you will need to get the correct Ethereum address for your exchange site.

papahmauriel

newbie

Activity: 34

Merit: 0

re check your address maybe have wrong number or different address

kingsters

member

Activity: 238

Merit: 12

I was quet but i was not blind

what do u want sell erc20 tokens ?

1st need etherdelta account and import the mew to ED an u can deal with ed must need etherurm in mew to gas fee

Assyha

newbie

Activity: 32

Merit: 0

Quote from: DanTeMessy on November 18, 2017, 03:45:48 AM

Hi all

i have a problem in send token from MEW to exchange sites
even to send token to the original wallet of the token like PIGGY coin wallet .

i have some ETH in MEW for gas and every thing looks OK
when i click Generate Transaction i got this message :

""Please enter a valid address""

https://image.ibb.co/bFpgk6/error.png

Wish you can help me Roll Eyes

Really simple thing, your address is invalid,, when you make the transaction, you've been notified, just check your address again.

Amaran

newbie

Activity: 4

Merit: 0

Quote from: DennisStoff on November 18, 2017, 08:48:10 AM

maybe it's different coin, just the same symbol with your coin or token.

i do agree, pleaee recheck your coin name.

Boseda

sr. member

Activity: 448

Merit: 250

Quote from: DanTeMessy on November 18, 2017, 03:45:48 AM

Hi all

i have a problem in send token from MEW to exchange sites
even to send token to the original wallet of the token like PIGGY coin wallet .

i have some ETH in MEW for gas and every thing looks OK
when i click Generate Transaction i got this message :

""Please enter a valid address""

Wish you can help me Roll Eyes

I am sure you entered the wrong address since ETH addresses start with '0x...'. Take the time to check again the address you have to send money. Also make sure you are talking about the same 'Piggy' token listed on that exchange since there are so many coins and tokens out there that some could share the same name or the same Symbol, but aren't the same token.

pealr12

hero member

Activity: 1946

Merit: 502

It seems you have piggy token but not the real coin itself your case i like cryptonex coin.
Everytime i get that message also when i try to send my cryptonex to an exchange

DanTeMessy

member

Activity: 66

Merit: 10

Quote from: DennisStoff on November 18, 2017, 08:48:10 AM

maybe it's different coin, just the same symbol with your coin or token.

its look like that Huh

DennisStoff

member

Activity: 140

Merit: 10

maybe it's different coin, just the same symbol with your coin or token.

DanTeMessy

member

Activity: 66

Merit: 10

Quote from: Stedsm on November 18, 2017, 08:06:38 AM

Quote from: DanTeMessy on November 18, 2017, 07:38:22 AM

i get addresses from :

Cryptopia
   CoinExchange
   Novaexchange

and get the same issue :\

Please check for some spaces there if any as that might be the cause for MEW not being able to clearly verify the recipient's address.
Or try to contact devs and draw their attention towards the problem you are facing. Btw, yours is not piggy, but piggies token and here's their thread: https://bitcointalksearch.org/topic/annpiggies-charitable-airdroptoken-sale-project-concluded-2325683

i'm so confused right now , when i open ethplorer.io to check my piggy token it show me this coin : https://ethplorer.io/address/0xc6b1953ab35f05db745dadd5ce411d75758a7898

and when i open coinmarketcap i see the same coin symbol https://coinmarketcap.com/currencies/piggycoin/

what you are talking about is this one https://ethplorer.io/address/0xe93bf54f9000a5ffa8356afbe42f83a3f2006e2e
and i have zero of it

Huh

Topic: Need help in MEW to send Token (Read 717 times)