Can you describe what you mean when you say that they won't connect to the network? Also, from a computer running on the same network, please open a command prompt and run "ipconfig /all" and post the results here. All Bitmain hardware comes with preset network settings that won't work if your router's IP address isn't 192.168.1.1. Many routers use 192.168.0.1 or 192.168.1.254, which could cause the problem you're describing. Additionally, please confirm that you don't already have a device running with the same IP address of 192.168.1.99.
I have a strong feeling that your problem is not with the hardware ;-)
Topic: Need S2 IO Board - Help - page 2. (Read 1958 times)
Hi,
I've been having problems with all 3 of my S2's - they boot up but won't connect to the network. I think it may be the IO board (specifically the ethernet port on them) and am looking to see if anyone has one (or 3) they are will to part with.
OR - if you live in the Charlotte, NC area and are willing to bring your S2 IO board by to verify this is the problem (will pay for gas
) - please let me know.
It is killing me that I have 3 S2's just sitting idol here......
BTW - I've contacted Bitmain but they have not been very helpful.....
Thanks.
I've been having problems with all 3 of my S2's - they boot up but won't connect to the network. I think it may be the IO board (specifically the ethernet port on them) and am looking to see if anyone has one (or 3) they are will to part with.
OR - if you live in the Charlotte, NC area and are willing to bring your S2 IO board by to verify this is the problem (will pay for gas
) - please let me know.It is killing me that I have 3 S2's just sitting idol here......
BTW - I've contacted Bitmain but they have not been very helpful.....
Thanks.
Jump to: