Pages:
Author

Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 32. (Read 289473 times)

member
Activity: 172
Merit: 10
0,178 mBTC = 1,17 eur... is that what you made n 24 hours?

See this settings : https://pasteboard.co/HcJiWo4.png

I selected 6 pools and mining 24h. Nplusminer has chosen the most profitable every 5 minutes. The Zergpoolplus 0,178 mBTC result.

hero member
Activity: 1218
Merit: 534
0,178 mBTC = 1,17 eur... is that what you made n 24 hours?
member
Activity: 172
Merit: 10
I've done a 24-hour test with these settings (I have 6x1070 GPU Rig) :

https://pasteboard.co/HcJiWo4.png     (BTC Wallet address and MPH name hidden)

The result :

Code:
Blazepoolplus:	0,121	mBTC
Zergpoolplus: 0,178 mBTC
Zpoolplus: 0,011 mBTC
Ahaspoolplus: 0,015 mBTC
Hashref: 0,154 mBTC
MiningPoolHub: 0,044 mBTC
Summary: 0,523 mBTC

(The difference between "total unpaid" on start-up and shutdown.)



If I only mining ETH or ZEC I still have 1 mBTC a day!
newbie
Activity: 86
Merit: 0
I use MPH. How do I set up to display a balance?
NemosMiner-V3
Thank you.
newbie
Activity: 4
Merit: 0
I have been trying to get this miner working for a few days now, but no luck. It always gets stuck with a message stating "sleeping 300". Sometimes it starts doing something after 300 seconds, but not for long until it gets stuck at said message again.

I have a small nvidia rig with 2x1070ti, 1x1070, 1x10606GB, 1x1050ti, which is running flawlessly on awesomeminer, so I'm really stumped as to what I could to to troubleshoot this issue.

My cards are all overclocked, but I get the same result on stock settings (and awesomeminer has no issues, so I doubt that this is the problem).

Has anyone experienced this issue before?
sr. member
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
I have a problem when I run 9 GPU 1080 TI the windows finds the 9 gpu but the nemosminer also however it does not execute, it simply gives an error, but if I execute the command below it executes 8 gpu, seems a limitation of CCMINER?
NVIDIA-TPruvotcuda9 \ ccminer.exe -b 4068 -a tribus -o stratum + tcp: //tribus.mine.ahashpool.com: 8533 -u 1FJ67bzAa4V3SsRTdB -p ID = NPlusMiner13, c = BTC -api-remote --api - allow = 0/0

follows the images with command and without command

https://prnt.sc/itguzm

https://prnt.sc/itgv4w

primo1983 thankyou
newbie
Activity: 72
Merit: 0
I have a problem when I run 9 GPU 1080 TI the windows finds the 9 gpu but the nemosminer also however it does not execute, it simply gives an error, but if I execute the command below it executes 8 gpu, seems a limitation of CCMINER?
NVIDIA-TPruvotcuda9 \ ccminer.exe -b 4068 -a tribus -o stratum + tcp: //tribus.mine.ahashpool.com: 8533 -u 1FJ67bzAa4V3SsRTdB -p ID = NPlusMiner13, c = BTC -api-remote --api - allow = 0/0

follows the images with command and without command

https://prnt.sc/itguzm

https://prnt.sc/itgv4w
sr. member
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3


Announcement Minimum fee change in NPLusMiner and NemosMiner

The minimum fee thresholds of 1 minute in NPlusMiner and NemosMiner are presenting the inconvenient that it penalizes users benefit due to switching but does not really make anything to donations as the miners has really no time to send any shares to pools in such short time.
It is creating kind of a loose / loose situation.

MrPlus and Nemo discussed the situation and took the following decision to try and resolve the matter.

In the next version of both products, the minimum fee time will be set to 3 minutes (0.2%) and the default setting will be 8 minutes (0.5%).
Users will be able to change the value to anything equal or above 3.
If the value is set to anything lower than 3, a value will randomly picked from (0, 3, 4, 5, 6,  7, 8 ) when it starts.

Summary:
  Minimum   Default   Lottery
Current   1 minute   5 minutes   random from 0 to 5
Future   3 minutes   8 minutes   random from 3 to 8 or 0

That makes no change for users already giving 3 or more minutes.
That makes users giving less than 3 minutes give a bit more but the impact on their side will actually be worth something on the other side.

We want to stay completely transparent on the way fees a managed in the product. Below is a explanation of how it functions:
Donations occurs once every 24 hours for the selected amount of time (default 8 minutes). The first donation sequence occurs 1 hour after miners are started. If Interval is set higher than the donation time, the interval will prime.
Example for default parameters. Miners started at 10, First donation cycle runs at 10:52 untill 11, Next donation cycle occurs 24 hours after.

Regards,
Nemo and MrPlus


newbie
Activity: 17
Merit: 0
Is the watchdog still active in the 3.0?  I ask ask it ran while I was out of town for two days and came back and its not even finished benchmarking.  It looks like some of these failed and it just sits there. 
newbie
Activity: 7
Merit: 0
I did not make a new folder. Just make a copy of startpool.bat and change dstm settings as 0 1 2 3 4 to 5 6 7 8 etc.

The problem with keeping everything in a single folder is that the hashrates will get all out of wack.  Say for example, copyA is mining C11, copyB is mining X17.  CopyA has been running for 60 seconds now it's going to update the saved C11 hashrate to the current value, to do so is going to see what ccminer is reporting on port 4068, but since copyB is also running ccminer on port 4068, then copyA will save X17's hashrate as the benchmarked hashrate for C11 and throw the whole switching algo out of whack.

You can avoid this by making the saved hashrates read-only after the initial benchmarking, but you don't get the live hashrate updates, which it's not a biggie, I just like the otherway better  Smiley



Yeah exactly I made the hashrates read only. Problem solved.
newbie
Activity: 52
Merit: 0
Algo nist5 is absent to pool Phi-Phi.
jr. member
Activity: 76
Merit: 1
Fun fact: Playing PUBG with one card while mining with the rest using Nemos algo auto-switching function, can possible deprive you of a chiken dinner! Roll Eyes
Switching miner software while gaming will (obviously) make your gaming window lose focus.

Someone has already found a solution.
run nemos under another user account
than the one used for gaming
full member
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
Fun fact: Playing PUBG with one card while mining with the rest using Nemos algo auto-switching function, can possible deprive you of a chiken dinner! Roll Eyes
Switching miner software while gaming will (obviously) make your gaming window lose focus.
newbie
Activity: 86
Merit: 0
it would not be bad, that in the config tab, it would be possible to independently size the payout for each pool.
jr. member
Activity: 76
Merit: 1
Hi guys
After 48 hours with V3 and Ahash + Blaze Plus
Nemos spends 80% of the time on Blaze.
If this is correct that is amazing, until now
i thought that ahash is the better one.
Thank You Nemos and the others for the effort and
keep releasing good stuff.
Now try zergpool+  Wink

I did it last week before V3 but not happy with the results,
will try again in the future with V3, problem is i am a small miner
and 3 pools will cause me a lot of delay in payment.
Will see.
newbie
Activity: 84
Merit: 0
Hi guys
After 48 hours with V3 and Ahash + Blaze Plus
Nemos spends 80% of the time on Blaze.
If this is correct that is amazing, until now
i thought that ahash is the better one.
Thank You Nemos and the others for the effort and
keep releasing good stuff.
Now try zergpool+  Wink
jr. member
Activity: 76
Merit: 1
Hi guys
After 48 hours with V3 and Ahash + Blaze Plus
Nemos spends 80% of the time on Blaze.
If this is correct that is amazing, until now
i thought that ahash is the better one.
Thank You Nemos and the others for the effort and
keep releasing good stuff.
newbie
Activity: 12
Merit: 0
Hi,

v3 ===> currency EUR , or EURO, or EU doesn't work ( still USD )

any idea ?

up ?
newbie
Activity: 12
Merit: 0
I did not make a new folder. Just make a copy of startpool.bat and change dstm settings as 0 1 2 3 4 to 5 6 7 8 etc.

okay will try that.. does this has something do with the miner having problem identifying GPU's with double digit numbering ? etc 10 and 11 ?

newbie
Activity: 23
Merit: 0
How do I specify to use different miners? Neoscrypt for example defaults to KlausT, but Excavator gives 30% better performance. Same with RavenEnemy vs Raven225 build here

It is possible to add new miners, it's just a bit tricky the first time around.

If you go to the Miners folder you'll see all the currents miners listed, to add RavenEnemy which I think it's ccminer, I'd copy and rename an existing ccminer*.ps1 file, then edit the files to do the necessary changes to make it run your new miner.  In the case of Excavator it's a lot trickier, I'd recommend copy the excavatorNvidianeo.ps1 from SniffDogMiner and edit it to make the changes you need.

Quick question, where do you download RavenEnemy from? 



Be careful with enenmy-mine. It MAY show higher hashrates in its screen (and thus nemos will record it as higher)... but what is recorded by zerg is always lower than Raven miner. Enemymine is a closed source app and is IMHO sketchy as shite.
Pages:
Jump to: