New 16 gpu industrial style miner review. Will post details soon__updated - page 3.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

@ yankees yes I will post links later. Also used a piece of thin plywood.

here are some gui readouts

temps are all good with the downclock to 75%

TheYankeesWin!

sr. member

Activity: 463

Merit: 301

Phil that is the material you got from homedepot ? you built some other sound proofed items with it. A big roll was dropped shipped to you correct?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Okay I got it to run with less power.

I used global clocks

75 watts
+60 core
+450 memory

this gives me 4600 sols

also it slowed fans to 3.5-3.6 which I am thinking means 3500 rpm

I will take some photos today

bottom of a 3 foot wide rack with a lot of sound proofing

sounding proofing in place

kjs

full member

Activity: 188

Merit: 105

Quote from: philipma1957 on March 06, 2018, 11:22:08 PM

S-9's = really bad.
Pandaminer = bad
Avalon 741 = loud

New 16 gpu = better then the 3 above
With my sound mod I would say garage mining could work.

But these are still heavy duty pieces of gear they weigh 45 pounds are 31 inches by 17 inches by 11 inches

I will meter for sound and power use on Weds. I did a few videos nothing posted I am a bit tired.

https://www.nicehash.com/miner/3QPFEdX8rtXHoVZHct5eUbp7AK1t1vRMfL

11b596 Equihash 4781.32 Sol/s

feel free to look at it mine at the link above.

I need to figure why these port conflicts happen on my system. I killed hours trying to figure out what was wrong today.

My power guess will be 16 x 112 = 1800 + 50 = 1850/.94 = 1968 watts

When I was running 8x 1080tis on low clocks with my onda b250 build I did 5200 sols at 1300 watts or 4 sols a watt at the wall

this gear will be about 4675 sols at 1968 watts = 2.37 sols per watt

I will tweak it to see what I can boost that to On the autominer.at

I got 3100 sols at 1025 watts with zotac 1060s or 3.02 sols a watt.

I think I can do that with this gear. I just need to understand the power settings for ethos. I am pretty much a rookie at ethos software.

The power settings for each GPU are set within the local.conf file at /home/ethos/local.conf

You need settings like these for NVIDIA GPU's:

pwr ..

Example from one of my real configs for Ethereum mining:

Code:

loc c94380 USems001
miner c94380 ethminer
mem c94380 4600 4600 4600 4600 4600 4600 4600 4600 4600 4600 4600 4600 4600 4600 4600 4600
pwr c94380 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80
cor c94380 -200 -200 -200 -200 -200 -200 -200 -200 -200 -200 -200 -200 -200 -200 -200 -200

Also recommend reviewing the contents of the EthOS Knowledge Base and Sample Configuration Files:
http://ethosdistro.com/kb/
http://ethosdistro.com/pool.txt

kjs

full member

Activity: 188

Merit: 105

Quote from: crazydane on March 06, 2018, 08:53:50 PM

I suspect the Ethernet port above the USB thumb drive is the IPMI port. That's for management. Try one of the other 2 ports next to the VGA connector.

Yes, the cable above the USB ports is the IPMI port.

The Ethernet port you want is the one towards the bottom of the motherboard. Ensure to connect to a 1 or 10 Gigabit Ethernet switch as 10/100 Megabit Ethernet is not supported.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

S-9's = really bad.
Pandaminer = bad
Avalon 741 = loud

New 16 gpu = better then the 3 above
With my sound mod I would say garage mining could work.

But these are still heavy duty pieces of gear they weigh 45 pounds are 31 inches by 17 inches by 11 inches

I will meter for sound and power use on Weds. I did a few videos nothing posted I am a bit tired.

https://www.nicehash.com/miner/3QPFEdX8rtXHoVZHct5eUbp7AK1t1vRMfL

11b596 Equihash 4781.32 Sol/s

feel free to look at it mine at the link above.

I need to figure why these port conflicts happen on my system. I killed hours trying to figure out what was wrong today.

My power guess will be 16 x 112 = 1800 + 50 = 1850/.94 = 1968 watts

When I was running 8x 1080tis on low clocks with my onda b250 build I did 5200 sols at 1300 watts or 4 sols a watt at the wall

this gear will be about 4675 sols at 1968 watts = 2.37 sols per watt

I will tweak it to see what I can boost that to On the autominer.at

I got 3100 sols at 1025 watts with zotac 1060s or 3.02 sols a watt.

I think I can do that with this gear. I just need to understand the power settings for ethos. I am pretty much a rookie at ethos software.

TheYankeesWin!

sr. member

Activity: 463

Merit: 301

What is okay sound?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: crazydane on March 06, 2018, 08:53:50 PM

I suspect the Ethernet port above the USB thumb drive is the IPMI port. That's for management. Try one of the other 2 ports next to the VGA connector.

I tried all 3 and I can't get a signal.

Some times this would happen with some with rasp pi 's

I am going to disconnect a few other pc's and see if it is a port conflict

Update one of the mac minis was going to 192.168.0.106 and the miner was going to 192.168.0.106

turned off a mac mini and then got the miner to go online yeah baby!!

BTW you were correct in that the double stack is the one to plug into.

Going to point to nicehash and do zec if possible.

Okay trying to program a conf in at the moment.

I got it working yes!!

About 4675 sols. Temps range from 65c to 76c

And I managed to make sound okay

crazydane

full member

Activity: 558

Merit: 194

I suspect the Ethernet port above the USB thumb drive is the IPMI port. That's for management. Try one of the other 2 ports next to the VGA connector.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: kjs on March 06, 2018, 08:11:42 PM

Delivered!

3/06/2018 - Tuesday
2:01 pm Delivered HOWELL, NJ

yeah and I am going nuts getting it to mine. Cant seem to get an internet connection.

smaller then I thought fits a 3 foot rack nicely.

which ethernet cable jack did you plug into

kjs

full member

Activity: 188

Merit: 105

Delivered!

3/06/2018 - Tuesday
2:01 pm Delivered HOWELL, NJ

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

It is on the truck.

TheYankeesWin!

sr. member

Activity: 463

Merit: 301

any news?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: malotiin on March 04, 2018, 06:03:01 PM

Do you recommend nicehash to monitor gpus + system stats if you have more than 2rigs?

Nice rig build btw! Roll Eyes

I use nicehash because I have multiple btc addresses.

the solar array
https://www.nicehash.com/miner/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr

a four card rig in my garage
https://www.nicehash.com/miner/146UJM5kgzLVUV23CXCf33KQKHckoX1gx3

a two card rig in my friends office
https://www.nicehash.com/miner/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje

this is waiting for this rig review
https://www.nicehash.com/miner/3QPFEdX8rtXHoVZHct5eUbp7AK1t1vRMfL

and I have a few others for my clients.
I also use simplemining.net smOS to manage the gear.

This rig will have ethOS a different linux then smOS .

I will try this rig with ethOS and with smOS and point to nicehash to this address

https://www.nicehash.com/miner/3QPFEdX8rtXHoVZHct5eUbp7AK1t1vRMfL

The rig is in NJ I live in NJ I need to wait till tues to get it.

Date/Time
Activity      Location
3/05/2018 - Monday
7:52 am   At local FedEx facility      LAKEWOOD, NJ

7:52 am   At local FedEx facility      LAKEWOOD, NJ
Package not due for delivery
4:40 am   Departed FedEx location      NEWARK, NJ
3/03/2018 - Saturday
11:23 pm   Departed FedEx location      NEWARK, NJ
9:50 am   Arrived at FedEx location      NEWARK, NJ
9:34 am   In transit      NEWARK, NJ
8:08 am   Departed FedEx location      INDIANAPOLIS, IN
3/02/2018 - Friday
6:02 pm   Arrived at FedEx location      INDIANAPOLIS, IN
8:54 am   Departed FedEx location      OAKLAND, CA
3:01 am   Arrived at FedEx location      OAKLAND, CA
3/01/2018 - Thursday
11:10 pm   Departed FedEx location      OAKLAND, CA
11:02 pm   Arrived at FedEx location      OAKLAND, CA
10:12 pm   Left FedEx origin facility      SUNNYVALE, CA
7:56 pm   Picked up      SUNNYVALE, CA
7:21 pm   Picked up      SUNNYVALE, CA
Tendered at FedEx Office
3:29 pm   Shipment information sent to FedEx

malotiin

newbie

Activity: 4

Merit: 0

Do you recommend nicehash to monitor gpus + system stats if you have more than 2rigs?

Nice rig build btw! Roll Eyes

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: CjMapope on March 04, 2018, 02:12:40 AM

Quote from: philipma1957 on March 04, 2018, 12:02:15 AM

Quote from: ?? on ??

this is nice, the frame looks like a "Spotswood" , i find myself wondering if thats where the inspiration was drawn from

@Phil, you said you tested it with your longest 1080ti, how about WIDEST? i didnt see reference to if this would fit say maybe x16 1080ti AMP! extremes, or if maybe dual-slotx16 is max width? or even less?

thanks for the thread, loving it!

Please I deleted your post. I have not tested it since It arrives in 3 days.

The frame should use the same aluminum that my waterblock Spotswood uses .

ugh, and people wonder why the forums eliteist attitude pushes people away.
w.e, thats what i get trying to engage with you, take care then,i wont be ordering one, sour taste now from this

I simply said you were in error.

I can not allow an error to stand without a correction.
I quoted your error for all to see it. Here is why: This is expensive gear I don't want anyone to think 1080tis have been tested in it since I don't have the gear as of now. When I get the gear I will try to test some of my 1080ti's in it.

Look we all make errors we are humans plain and simple.
I do not want you to be offended I am a regular guy not an elitist type at all.
You may have thought I wrote I tested 1080tis in this gear so to be clear I have not done that at all.

CryptoDocker

jr. member

Activity: 122

Merit: 1

Nice rig, pretty much commercial use almost I think this would be too loud for most garages even

Keelhaul

member

Activity: 67

Merit: 10

Great job done. Gonna dig into it Roll Eyes

CjMapope

legendary

Activity: 1820

Merit: 1092

~Full-Time Minter since 2016~

Quote from: philipma1957 on March 04, 2018, 12:02:15 AM

Quote from: ?? on ??

this is nice, the frame looks like a "Spotswood" , i find myself wondering if thats where the inspiration was drawn from

@Phil, you said you tested it with your longest 1080ti, how about WIDEST? i didnt see reference to if this would fit say maybe x16 1080ti AMP! extremes, or if maybe dual-slotx16 is max width? or even less?

thanks for the thread, loving it!

Please I deleted your post. I have not tested it since It arrives in 3 days.

The frame should use the same aluminum that my waterblock Spotswood uses .

ugh, and people wonder why the forums eliteist attitude pushes people away.
w.e, thats what i get trying to engage with you, take care then,i wont be ordering one, sour taste now from this

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: ?? on ??

this is nice, the frame looks like a "Spotswood" , i find myself wondering if thats where the inspiration was drawn from

@Phil, you said you tested it with your longest 1080ti, how about WIDEST? i didnt see reference to if this would fit say maybe x16 1080ti AMP! extremes, or if maybe dual-slotx16 is max width? or even less?

thanks for the thread, loving it!

Please I deleted your post. I have not tested it since It arrives in 3 days.

The frame should use the same aluminum that my waterblock Spotswood uses .

Topic: New 16 gpu industrial style miner review. Will post details soon__updated - page 3. (Read 2790 times)