Topic: ★ [NEW] 1Th/s+ GekkoScience R606 Pod Miner & Product Sales Thread ★ - page 2. (Read 2092 times)
December 24, 2018, 03:20:35 PM
Thats great. Thanks rockmoney. Looks like a little solar setup may well be feasible on those figures.
December 24, 2018, 01:31:10 PM
Nice lttle setup rockmoney. Im hoping to have the same going thing going on eventually. Just out of curiousity how much power does do the hubs use? Im thinking of getting a little solar array set up to power mine.
Power consumption per stick is at most 12 Watts. So, estimating on the extreme high end, that's a total of 120 Watts (10 sticks x 12 Watts each). Plus, the fans are using about 6 Watts each, so that's 12 Watts total for cooling. In total, we have 120 Watts (10 NewPac sticks) + 12 Watts (90mm fans) + 6% (for PSU efficiency) = 140 Watts.
On the low side, we can say 10 Watts per stick, and 3 Watts per fan. That would be 100 Watts for the sticks, 6 Watts for the fans, and + 6% = 112.4 Watts.
To answer your question, total power consumption for my setup is somewhere between 113 Watts - 140 Watts total. I am averaging ~1.1Th/s poolside with AsicBoost enabled. Without AsicBoost, I don't see any of the "missing nonce" errors on cgminer, but it lowers my average poolside hashrate to ~850Gh/s.
December 24, 2018, 11:22:37 AM
Nice lttle setup rockmoney. Im hoping to have the same going thing going on eventually. Just out of curiousity how much power does do the hubs use? Im thinking of getting a little solar array set up to power mine.
December 23, 2018, 03:57:19 PM
So, I am now mining at over 1Th/s using only NewPac sticks. I have been asked by a few different people to share my setup, so here goes..
I am using an MSI GE72MVR 7RG Apache Pro Laptop running Windows 10.1 latest edition. I am using 2 of the 4 USB ports to connect the new GekkoScience USB hubs available here: 419mining.com
To prevent as much resistance as possible, I am using short (1.5'), gold plated Monoprice USB cables as can be seen on Amazon here: http://a.co/d/34dBcqo
I have x5 NewPac sticks in each USB hub, being cooled by placing high velocity 90mm PC fans directly on top of the heatsinks. This blows cool air down each stick and any excess heat along with it. Measuring temps with my infrared thermometer (heat gun) shows temps at 104°F. The 90mm fans fit perfectly when placed directly atop of the USB hub with x5 NewPac stick in, and can be found here: http://a.co/d/dnVhvcN
For power, I am using a HP 1200 Watt Platinum Server PSU with breakout board, and connecting via the 6-pin PCI-e terminal. The 1200 Watt PSU is definitely overkill, but I generally only run my power supplies at 40% of their maximum rated capacity. Virtually the same PSU setup can be found here: 419mining.com
To control the speed of my fans, I am using a 12V DC fan speed controller I had laying around (these are very high velocity fans and need power cranked down a bit). The same one is available on Amazon here: http://a.co/d/g1eLxdz
Feel free to view pictures of my setup below, or view the entire gallery by clicking here: https://postimg.cc/gallery/3f4g4bkea/
I am using an MSI GE72MVR 7RG Apache Pro Laptop running Windows 10.1 latest edition. I am using 2 of the 4 USB ports to connect the new GekkoScience USB hubs available here: 419mining.com
To prevent as much resistance as possible, I am using short (1.5'), gold plated Monoprice USB cables as can be seen on Amazon here: http://a.co/d/34dBcqo
I have x5 NewPac sticks in each USB hub, being cooled by placing high velocity 90mm PC fans directly on top of the heatsinks. This blows cool air down each stick and any excess heat along with it. Measuring temps with my infrared thermometer (heat gun) shows temps at 104°F. The 90mm fans fit perfectly when placed directly atop of the USB hub with x5 NewPac stick in, and can be found here: http://a.co/d/dnVhvcN
For power, I am using a HP 1200 Watt Platinum Server PSU with breakout board, and connecting via the 6-pin PCI-e terminal. The 1200 Watt PSU is definitely overkill, but I generally only run my power supplies at 40% of their maximum rated capacity. Virtually the same PSU setup can be found here: 419mining.com
To control the speed of my fans, I am using a 12V DC fan speed controller I had laying around (these are very high velocity fans and need power cranked down a bit). The same one is available on Amazon here: http://a.co/d/g1eLxdz
Feel free to view pictures of my setup below, or view the entire gallery by clicking here: https://postimg.cc/gallery/3f4g4bkea/
- click on any photo to enlarge -
December 16, 2018, 04:24:46 PM
Some users have been struggling to get there NewPac sticks running at speeds over 100Gh/s. Therefore, I made this diagram to help any users, new or old. There is a potentiometer that controls the voltage, looks like a screw head, and is located on the PCB board of all NewPac USB sticks. If you pay close attention, you will notice a flat section along the outer perimeter of the screw head. Use that flat part for reference as you increase and/or decrease the voltage to meet your needs. Please note, even the slightest movement of the pot will affect the voltage, so only turn the screw head in very small increments.
- click to enlarge -
- click to enlarge -
December 15, 2018, 03:09:15 PM
vh just released another updated vh/gekko build of cgminer, with a very important and critical update! Download directly here: http://23.108.83.14/images/cgminer-4.11.1-windows-gekko-3339a51.7z
or view post from vh here: https://bitcointalksearch.org/topic/m.48674255
December 14, 2018, 04:22:43 PM
GekkoScience has just released their latest product - a USB hub capable of powering x7 NewPac sticks at a frequency of 600Mhz. This configuration will yield a total of ~800Gh/s!
Check out this post for more info: https://bitcointalksearch.org/topic/m.48665654
Check out this post for more info: https://bitcointalksearch.org/topic/m.48665654
December 13, 2018, 03:10:55 PM
New cgminer vh/gekko build just released, as seen in this post from vh: https://bitcointalksearch.org/topic/m.48649259
or download it directly here: http://23.108.83.14/images/cgminer-4.11.1-windows-gekko-60d9f64.7z
If you have not done so already, it is highly recommended to update and install to ensure your USB stick miners are working as intended!
or download it directly here: http://23.108.83.14/images/cgminer-4.11.1-windows-gekko-60d9f64.7z
If you have not done so already, it is highly recommended to update and install to ensure your USB stick miners are working as intended!
December 08, 2018, 01:51:15 PM
New cgminer vh/gekko build released by vh on 2018 DECEMBER 06, as can be seen here: https://bitcointalksearch.org/topic/m.48503019
Make sure you are using this latest build, as it is the most stable one yet!
Make sure you are using this latest build, as it is the most stable one yet!
December 07, 2018, 05:56:04 PM
Here are the latest test results running x4 NewPac sticks at 500Mhz with a Plugable USB3.0 7-Port 60 Watt USB Hub. Average hashrate is 448Gh/s or 0.45Th/s.
Each stick is yielding OVER 100Gh/s!
- click on image to enlarge -
Each stick is yielding OVER 100Gh/s!
- click on image to enlarge -
December 05, 2018, 12:44:24 PM
The SECOND BATCH of GekkoScience NewPac sticks have arrived and are ready for immediate sale and shipment! Reserve yours now..
December 01, 2018, 04:51:57 PM
★☆ NewPac USB Stick Miner Holiday SALE ☆★
Until DECEMBER 31st, 2018 (or while supplies last), the NewPac USB Stick Miners will be on sale for $45.00 each.
Until DECEMBER 31st, 2018 (or while supplies last), the NewPac USB Stick Miners will be on sale for $45.00 each.
- PayPal or any major crypto will be accepted for payment.
- FREE SHIPPING on all USA orders
- International shipping is a flat rate charge of $18.00 USD per order to anywhere in the world!
To pay via PayPal, please send payments to: [email protected], then message me with the transaction details and your shipping info (all orders are processed and shipped the same or next business day). To pay via crypto, please send me a message with type of crypto intended on using along with the exact amount you intend to pay, and I will promptly reply with a payment address.
November 29, 2018, 03:04:03 PM
International Shipping is now available for only $18.00 USD
In an effort to provide better access for those located overseas, ALL International orders will use a precalculated, flat rate cost of just $18.00 USD per order! Hopefully, this will help International sales, and make it easier to order.
In an effort to provide better access for those located overseas, ALL International orders will use a precalculated, flat rate cost of just $18.00 USD per order! Hopefully, this will help International sales, and make it easier to order.
Do I need a good USB board to plug in several of these that can deliver the necessary power for them, and room enough so they aren't close together?
I've always wanted at least 5 of these! Preferably, 10, but you know...
Yes, there are plenty in stock and available for immediate sale. Theoretically, they can do over 100 Gh/s, but you would need a high end USB hub able to supply at least 2A to each stick simultaneously. I currently have x4 NewPac sticks running at 300Mhz, and yielding 265Gh/s..
November 29, 2018, 08:25:47 AM
International Shipping is now available for only $18.00 USD
In an effort to provide better access for those located overseas, ALL International orders will use a precalculated, flat rate cost of just $18.00 USD per order! Hopefully, this will help International sales, and make it easier to order.
In an effort to provide better access for those located overseas, ALL International orders will use a precalculated, flat rate cost of just $18.00 USD per order! Hopefully, this will help International sales, and make it easier to order.
Do I need a good USB board to plug in several of these that can deliver the necessary power for them, and room enough so they aren't close together?
I've always wanted at least 5 of these! Preferably, 10, but you know...
November 27, 2018, 05:35:07 PM
International Shipping is now available for only $18.00 USD
In an effort to provide better access for those located overseas, ALL International orders will use a precalculated, flat rate cost of just $18.00 USD per order! Hopefully, this will help International sales, and make it easier to order.
In an effort to provide better access for those located overseas, ALL International orders will use a precalculated, flat rate cost of just $18.00 USD per order! Hopefully, this will help International sales, and make it easier to order.
November 27, 2018, 05:27:45 PM
Three of the NEWPACs received and ready to go.
Thanks,
Thanks,
Thanks for your reply regarding the x3 units you purchased during the pre-sale. I take great pride in being a beneficial, trustworthy addition to the community, and am glad to see a happy customer! If you need anything else, please let me know!
November 26, 2018, 07:32:08 PM
Three of the NEWPACs received and ready to go.
Thanks,
Thanks,
November 26, 2018, 03:31:57 PM
Again, sales are also live on eBay via either of the following listings:
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm2F143022700951
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F143024443894
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm2F143022700951
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F143024443894
November 24, 2018, 03:52:23 PM
☆ Black Friday / Cyber Monday SALE ☆
Until end of day Monday November 26, the NewPac USB Stick Miners will be on sale for $45.00 each. PayPal or any major crypto will be accepted for payment. I will ship internationally for the exact cost of shipping to your specific location. Feel free to message me for a shipping quote.
To pay via PayPal, please send payments to: [email protected], then message me with the transaction details and your shipping info.
Until end of day Monday November 26, the NewPac USB Stick Miners will be on sale for $45.00 each. PayPal or any major crypto will be accepted for payment. I will ship internationally for the exact cost of shipping to your specific location. Feel free to message me for a shipping quote.
To pay via PayPal, please send payments to: [email protected], then message me with the transaction details and your shipping info.
November 21, 2018, 04:10:06 PM
Again, I have received my shipment of brand new stock and orders are shipping. I have also created an eBay listing to help with sales. You can view the eBay listing here: http://www.ebay.com/itm/143022700951?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Jump to: