Topic: New 2TH/S miner (1W/1GH/S) on JUNE, 6 Blade, US$1.49/GH/S - page 2. (Read 4947 times)
How did the weight change from 67kg to 40kg?
So DHL are promising me that it'll arrive here today. For those that don't' know, Australia runs on 240v, so drawing 2200w isn't anything to stress about.
I'll throw some better pictures up as soon as it arrives. I've got to say, apart from the delay in shipping, I've been pleasantly surprised with these guys. They do a lot of other non-bitcoin hardware, too, according to http://www.winkor.com/
The only thing I find SLIGHTLY suspicious is that they use the same (terrible!) shopping cart software as http://lketc.com
Compare:
http://lketc.com/enlogin.aspx
http://www.bit-winkor.com/u_login.aspx
Obviously the same software. And it's so bad, it looks home-made, too. I wonder how closely they are working?
I'll update my previous post with photos.
I'll throw some better pictures up as soon as it arrives. I've got to say, apart from the delay in shipping, I've been pleasantly surprised with these guys. They do a lot of other non-bitcoin hardware, too, according to http://www.winkor.com/
The only thing I find SLIGHTLY suspicious is that they use the same (terrible!) shopping cart software as http://lketc.com
Compare:
http://lketc.com/enlogin.aspx
http://www.bit-winkor.com/u_login.aspx
Obviously the same software. And it's so bad, it looks home-made, too. I wonder how closely they are working?
I'll update my previous post with photos.
Sorry for not having update this thread yet.
I have taken more pictures, I need to shrink them first and add text.
I will do it tomorrow, I am freaky busy with other stuff to.
At the moment I have put the Avalon 2T miner in an isolated room and let the heat build up and see how it reacts on heat.
The fans are spinning wild under this condition and hashrate drops to 1.6-1.7 T.
It's about 60 dB under this condition.
If you buy an Avalon 2T, make sure you are not in a warm country or have the AC on, otherwise it won't hash at full speed at your poolside.
How does the Dragon 1T run in comparison under these conditions? I have taken more pictures, I need to shrink them first and add text.
I will do it tomorrow, I am freaky busy with other stuff to.
At the moment I have put the Avalon 2T miner in an isolated room and let the heat build up and see how it reacts on heat.
The fans are spinning wild under this condition and hashrate drops to 1.6-1.7 T.
It's about 60 dB under this condition.
If you buy an Avalon 2T, make sure you are not in a warm country or have the AC on, otherwise it won't hash at full speed at your poolside.
Sounds like we are better off just waiting for the S3.
Sorry for not having update this thread yet.
I have taken more pictures, I need to shrink them first and add text.
I will do it tomorrow, I am freaky busy with other stuff to.
At the moment I have put the Avalon 2T miner in an isolated room and let the heat build up and see how it reacts on heat.
The fans are spinning wild under this condition and hashrate drops to 1.6-1.7 T.
It's about 60 dB under this condition.
If you buy an Avalon 2T, make sure you are not in a warm country or have the AC on, otherwise it won't hash at full speed at your poolside.
I have taken more pictures, I need to shrink them first and add text.
I will do it tomorrow, I am freaky busy with other stuff to.
At the moment I have put the Avalon 2T miner in an isolated room and let the heat build up and see how it reacts on heat.
The fans are spinning wild under this condition and hashrate drops to 1.6-1.7 T.
It's about 60 dB under this condition.
If you buy an Avalon 2T, make sure you are not in a warm country or have the AC on, otherwise it won't hash at full speed at your poolside.
What is the shipping costs of this thing? Just curious and wanted to see the total costs to get one of these units.
Thanks in advance,
Chuck
Thanks in advance,
Chuck
Dear Chuck, May we know your address. so we can check the shipping cost for you
What's the shipping costs to NY, NY USA?
HI, shipping cost to USA about 280$ by DHL.
Burnin test room with Avalon 2T miners
I call Amanda the day before yesterday and told her I would buy an Avalon 2T to proove the community they exist and are ready for mass production.
She told me the durable cardboard boxes she has ordered haven't arrived yet.
I said, doesn't matter, I will buy and pick up the miner anyway.
When I arrived there at the factory yesterday, there was a Russians couple with 2 translators placing an order of 15 scrypt miners.
The Avalon 2T I bought was originally reserved for another customer, they don't have enough stock untill 21 june, but I convinced Amanda
I need the miner to proove to the community they exist.
I will update this post tonight with more pictures and measurement of power useage with a kill-a-watt and noise level and hashrate
built-in6 blades, each blades include one cooling fan.
Powercomsuption : 1watt/1GH/S. totally 2000W.
Hashrate: 1.9T to 2T Hash
Goodsstadus: 100% newly making
Firstbatch: shipping time 21th June. Totally100pcs quantity available.
Size:51.5*45*20cm
Weight:40KG
What is the shipping costs of this thing? Just curious and wanted to see the total costs to get one of these units.
Thanks in advance,
Chuck
Thanks in advance,
Chuck
Dear Chuck, May we know your address. so we can check the shipping cost for you
What's the shipping costs to NY, NY USA?
When you say its not noisy, can you give us an actual dB meter reading on a unit in a single room? If you don't have one handy there are plenty of free phone apps that give a pretty good reading on it. Also when you say we can use paypal to purchase a "sample" is that a full working unit that we can keep at full price? Or is that for a smaller unit? A unit that must be returned later? Or what else do you mean by that.
OK, I've ordered one. It's amazingly heavy (40kg, and is costing $240 to ship to Australia), but we'll see what happens.
Update:
2014-06-26
They said it would ship on the 23rd of June, but didn't actually ship until the 25th.
DHL has a package addressed to me, so hopefully it's not a couple of bricks.
2014-06-27
It arrived, but, it was badly damaged in transit
http://imgur.com/a/N210M
2014-06-30
This is not a good purchase.
Also, they didn't send me the associated Pi controller, so I had to spend half a day digging around to build a Linux machine that would talk to it. to actually mine. I had a look at the website, and, they don't actually say they include the Pi.
So, TL;DR: Don't waste your coins.
Update:
2014-06-26
They said it would ship on the 23rd of June, but didn't actually ship until the 25th.
DHL has a package addressed to me, so hopefully it's not a couple of bricks.
2014-06-27
It arrived, but, it was badly damaged in transit
http://imgur.com/a/N210M
2014-06-30
This is not a good purchase.
- It's not 2TH. It's about 1.7TH. That's more than a 10% variance, which is irritating already.
- it's not going to survive the trip until they figure out how to stop the A3 modules from bending the tiny little retaining bar (They should have designed the case better, so they could have put some foam holding the avalons in place while it was in transit, that could then be easily removed when it arrives).
- Avalons won't mine against any pool with even slightly large coinbases (P2Pool, Eligius, occasionally ghash.io) - You get this error "Avalon2: Miner Manager pool coinbase length have to less then 6144" which is a protocol level issue and isn't currently on the board to fix
Also, they didn't send me the associated Pi controller, so I had to spend half a day digging around to build a Linux machine that would talk to it. to actually mine. I had a look at the website, and, they don't actually say they include the Pi.
So, TL;DR: Don't waste your coins.
this weighs in at 67 kg? I guess you changed the weight or I read it wrong 40kg not 67 kg still very heavy to ship it.
it will come smashed and killed dead if it really weighs in at that weight. I am not looking to lug around a 67kg unit in my home. or ship it back to the seller if it arrives doa.
Once again another no go. comes close to roi at
3280 usd for shipping + gear
11% for diff increase
15 cents a k-watt
593 usd a coin
it will come smashed and killed dead if it really weighs in at that weight. I am not looking to lug around a 67kg unit in my home. or ship it back to the seller if it arrives doa.
Once again another no go. comes close to roi at
3280 usd for shipping + gear
11% for diff increase
15 cents a k-watt
593 usd a coin
Dear, yes, it is 40KG. no 67KG.
I can vouch they are legit.
Segree-Bitwinkor is the first bitcoin miner manufacturer I have visit in China.
Amanda is a nice person to talk to.
You can look at the photo's I have taken almost 2 months back from the Avalon 2T casing in the thread "Visiting Asic manufacturers."
Segree-Bitwinkor is the first bitcoin miner manufacturer I have visit in China.
Amanda is a nice person to talk to.
You can look at the photo's I have taken almost 2 months back from the Avalon 2T casing in the thread "Visiting Asic manufacturers."
Dear, Thanks for your commend^^
What is the shipping costs of this thing? Just curious and wanted to see the total costs to get one of these units.
Thanks in advance,
Chuck
Thanks in advance,
Chuck
Dear Chuck, May we know your address. so we can check the shipping cost for you
Can someone confirm that you are not a scammer ? Why should we trust you ? Could you provide us with more information about you, your company, etc. Why we have to go every time trough this..... Noone will buy anything from you if you dont confirm your legitimacy
our company have done export business for 6 years more. You can check our company register information on Hongkong business website.
And for miner. because it is new products. we making miner is about 10 month.
You also can see our company in beijing bitcoin summit offical website: http://www.globalbtcsummit.com. our segree are there
Any plans to visit this factory and check out this new unit? I would like to hear a review of how loud it is. I'm at 4 BTC right now, should be able to afford this within the next 1-2 weeks.
I spoke with Amanda last friday, she talk about the Avalon 2T, I am not an Avalon fan, but I will call her tomorrow and buy an Avalon 2T to do a review for you guys.
I possibly could buy this unit from you. After you check quality and chipcount. Its good deal untill Innosilicon drops A1 chip price, they can affort to drop it its better chip.
Underclocking A1 you could make similar 2T miner, Innosilicon is just riding with chip price now.
Still 1T miner 1-1,2kw psu is current sweet spot for efficiency in cooling power and price. Its no rocket sience you need more air to cool 2kw from same size of box.
Anything over 1kw psu need will raise production costs, cooling needs and so on.
Next cheap miner needs new chips, let it be Antminer S3@ 1kw or new Innosilicon chips or...
-edit~
Meh 67kg froget shipping it overseas.
Maybe Chinese can mine with these locally while Avalon is supplying cheaper chips than Innosilicon.
this weighs in at 67 kg? I guess you changed the weight or I read it wrong 40kg not 67 kg still very heavy to ship it.
it will come smashed and killed dead if it really weighs in at that weight. I am not looking to lug around a 67kg unit in my home. or ship it back to the seller if it arrives doa.
Once again another no go. comes close to roi at
3280 usd for shipping + gear
11% for diff increase
15 cents a k-watt
593 usd a coin
it will come smashed and killed dead if it really weighs in at that weight. I am not looking to lug around a 67kg unit in my home. or ship it back to the seller if it arrives doa.
Once again another no go. comes close to roi at
3280 usd for shipping + gear
11% for diff increase
15 cents a k-watt
593 usd a coin
Yeah it is impossible. In the best case if the price of BTC rise with 10-15 % , there is no break even again.... They have to come closer to roi , otherwise no one will buy their miners. As far as I can see , no one even purchased one of those 2 TH miners here nor in Beastly topic. I would prefer to keep my BTC rather to lock them in something which wont be profitable at all ...
P.s Over 14 % increase in difficulty. Those people are running their own miners for months and than sell them. Not this time... Good luck
this weighs in at 67 kg? I guess you changed the weight or I read it wrong 40kg not 67 kg still very heavy to ship it.
it will come smashed and killed dead if it really weighs in at that weight. I am not looking to lug around a 67kg unit in my home. or ship it back to the seller if it arrives doa.
Once again another no go. comes close to roi at
3280 usd for shipping + gear
11% for diff increase
15 cents a k-watt
593 usd a coin
it will come smashed and killed dead if it really weighs in at that weight. I am not looking to lug around a 67kg unit in my home. or ship it back to the seller if it arrives doa.
Once again another no go. comes close to roi at
3280 usd for shipping + gear
11% for diff increase
15 cents a k-watt
593 usd a coin
Any plans to visit this factory and check out this new unit? I would like to hear a review of how loud it is. I'm at 4 BTC right now, should be able to afford this within the next 1-2 weeks.
I spoke with Amanda last friday, she talk about the Avalon 2T, I am not an Avalon fan, but I will call her tomorrow and buy an Avalon 2T to do a review for you guys.
I thought the miner is not ready yet?
Any plans to visit this factory and check out this new unit? I would like to hear a review of how loud it is. I'm at 4 BTC right now, should be able to afford this within the next 1-2 weeks.
I spoke with Amanda last friday, she talk about the Avalon 2T, I am not an Avalon fan, but I will call her tomorrow and buy an Avalon 2T to do a review for you guys.
Any plans to visit this factory and check out this new unit? I would like to hear a review of how loud it is. I'm at 4 BTC right now, should be able to afford this within the next 1-2 weeks.
Jump to: