NobleCoin[NOBL] - 8% PoS | 1Yr+ | MARKETPLACE | PAY | GIFT | CHARITIES/MERCHANTS - page 118.

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: fairglu on March 06, 2015, 11:32:43 AM

Quote from: adam1230 on March 06, 2015, 10:11:04 AM

Can we get an updated chainz page?

https://chainz.cryptoid.info/nobl/#

It still has old info on it with the old algo.

TLWR: Done!

https://chainz.cryptoid.info/nobl/ is now the new PoS chain, I added a temporarily link and notice to the old chain, which is at https://chainz.cryptoid.info/noblold/

The https://chainz.cryptoid.info/nobles/ should temporarily be available and redirect to https://chainz.cryptoid.info/nobl/ until everyone updates

I'll take down the old chain in a few days.

Quote from: eagleflies on March 06, 2015, 11:27:33 AM

It is stuck at block 4065.

Only for a few minutes while stuff was getting switched

Of course! Wink

fairglu

legendary

Activity: 1100

Merit: 1032

Quote from: adam1230 on March 06, 2015, 10:11:04 AM

Can we get an updated chainz page?

https://chainz.cryptoid.info/nobl/#

It still has old info on it with the old algo.

TLWR: Done!

https://chainz.cryptoid.info/nobl/ is now the new PoS chain, I added a temporarily link and notice to the old chain, which is at https://chainz.cryptoid.info/noblold/

The https://chainz.cryptoid.info/nobles/ should temporarily be available and redirect to https://chainz.cryptoid.info/nobl/ until everyone updates

I'll take down the old chain in a few days.

Quote from: eagleflies on March 06, 2015, 11:27:33 AM

It is stuck at block 4065.

Only for a few minutes while stuff was getting switched

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: eagleflies on March 06, 2015, 11:06:29 AM

Quote from: adam1230 on March 06, 2015, 10:11:04 AM

Can we get an updated chainz page?

https://chainz.cryptoid.info/nobl/#

It still has old info on it with the old algo.

I will ask fairglu to change this. Thanks!

It is stuck at block 4065.

You rock! Wink

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: adam1230 on March 06, 2015, 10:11:04 AM

Can we get an updated chainz page?

https://chainz.cryptoid.info/nobl/#

It still has old info on it with the old algo.

I will ask fairglu to change this. Thanks!

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: giantkin on March 06, 2015, 09:44:29 AM

Ran the salvage command...got alot of

Noblecoin version v1.0.0.1 (1408381731)
Using OpenSSL version OpenSSL 1.0.1j 15 Oct 2014
Startup time: 03/06/15 14:04:47

Renamed wallet.dat to wallet.1425650688.bak
Salvage(aggressive) found 363 records

******* exception encountered *******

******* exception encountered *******

and a few skip keys.

Alot of Last seen .9hrs a few last seen at 300hrs.

wallet loads. but doesnt connect. (opened firewall) had 1 connection.

No balance. stopped all, restarted not connecting now.

next step?

Gk
giantkin at giantkin dot com

I dont have alot of coins, but would still like to move em over

Thanks
g

Let me understand:

1. you had unencrypted old wallet
2. you did backup it and then copied onto new .noblecoinPOS directory
3. then you started new PoS noblecoind?
4. it does not connect? it needs to download the blockchain to show correct balance

please try to start it with 'noblecoind -addnode=104.236.195.137'

Are you under linux or windows? if windows then instead of 'noblecoind' you need to run 'noblecoin-qt'

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: TN5 on March 06, 2015, 08:59:53 AM

Hello,

I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder.

But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed.

So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks.

The important question is have you sent the money before the switch? IF afterwards it does not matter and money is still in encrypted wallet. Documentation was written before the switch and presented option of transferring money to unencrypted wallet. But now this option does not exist anymore. I have updated docs to present current options.

adam1230

legendary

Activity: 1218

Merit: 1001

Can we get an updated chainz page?

https://chainz.cryptoid.info/nobl/#

It still has old info on it with the old algo.

giantkin

hero member

Activity: 1176

Merit: 501

Ran the salvage command...got alot of

Noblecoin version v1.0.0.1 (1408381731)
Using OpenSSL version OpenSSL 1.0.1j 15 Oct 2014
Startup time: 03/06/15 14:04:47

Renamed wallet.dat to wallet.1425650688.bak
Salvage(aggressive) found 363 records

******* exception encountered *******

******* exception encountered *******

and a few skip keys.

Alot of Last seen .9hrs a few last seen at 300hrs.

wallet loads. but doesnt connect. (opened firewall) had 1 connection.

No balance. stopped all, restarted not connecting now.

next step?

Gk
giantkin at giantkin dot com

I dont have alot of coins, but would still like to move em over

Thanks
g

TN5

member

Activity: 119

Merit: 10

Quote from: james6546 on March 06, 2015, 09:08:40 AM

Quote from: TN5 on March 06, 2015, 08:59:53 AM

Hello,

I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder.

But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed.

So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks.

Run CMD then cd to the folder with noblecoin-qt.exe in it then type noblecoin-qt.exe -salvagewallet

Thanks! Will do this as soon as I get home.

james6546

hero member

Activity: 691

Merit: 500

Quote from: TN5 on March 06, 2015, 08:59:53 AM

Hello,

I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder.

But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed.

So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks.

Run CMD then cd to the folder with noblecoin-qt.exe in it then type noblecoin-qt.exe -salvagewallet

TN5

member

Activity: 119

Merit: 10

Hello,

I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder.

But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed.

So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks.

harefakasinia

newbie

Activity: 17

Merit: 0

are your sure this coin? i sure and like this coin.

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: cryptonit on March 05, 2015, 07:27:11 PM

good job eagleflies

i wonder why u did choose against merge mining with magi
u could even use same reduce rewards when to much hashrate system as u use at magi
and only tiny mining rewards at noble as aux hashcoin anyway (so the pow would create additional inflation is not correct)

this way strengh noble network with magi pools and create a m7m mining family

would all have been good promotion for magi which i see as a underrated coin with great active community

but just my opinion
hybrid POW/POS in my opinion is superior to pure POS if done right

Thanks!

Well, community voted to have PoS and I understand PoS (to some extent). I do not know too much about merged mining ATM.

If we start thinking about merged mining in the future I would prefer to switch towards merge mining with litecoins. Sounds like safest option.

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: james6546 on March 06, 2015, 04:54:43 AM

Sorry I didn't get around to paying out last night.

Latest round of payouts have been done.

Total paid out: 355000
Total entrants: 52
Remaining funds: 895062.83320647 NOBL

Today is the last day, so get your free PoS flavoured NobleCoin

http://promoplugs.com/Campaign.aspx?CID=147

Addresses that have not worked, pm me if these are yours:

X4NPbmfMUm7MC9ZKsSBTEMucXeCHaf
1E8GyrMRMPGLktvAEBL1FqmMeTcd877FX6
1FnsWXNadQWcYEt2LWELch8LCcntgUyGi6
SR9XDBAKWtYd8NddyBK4VaK2roa2VBsmmQ
9nZKZxHsJuh5nHM1AcmEhpSa7WEMNuBFj

AFAIK all noble addresses should start with 9 so the only one which looks legit is last one.

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: Wesiematic on March 06, 2015, 03:03:59 AM

Quote from: eagleflies on March 05, 2015, 03:05:51 AM

Quote from: Wesiematic on March 05, 2015, 02:48:07 AM

Quote from: eagleflies on March 03, 2015, 09:19:51 AM

Quote from: Wesiematic on March 03, 2015, 07:37:17 AM

Ready for the swap

It happens tomorrow. You remember? Wink

https://bitcointalksearch.org/topic/noblecoinnobl-8-pos-1yr-marketplace-pay-gift-charitiesmerchants-402667

Yes i was ready, but choosed the easy way. Luckily i did one transaction before the exchange wallets
were in maintenance, so i'm minting and mining since last night.
Really great job , you have no noble donation adress for a small tip ? Wink

I'm happy that you're happy Wink

Here's my address: 9acVmwMxq8nKfpvvfwtKu7Vp6xE5dhHx7o

Thank you!

That's nice

, little tip should be there.

Thank you Wink

!

Cheers!

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: Wh1teKn1ght on March 05, 2015, 11:32:00 PM

eagleflies, can you post a standalone m7m miner that works with NOBL? I can't get the mining to work other than through the GUI. Would like to run the miner externally with a m7m miner.

Thanks!

Hi there!

I do not want to spend time on this - we have just 21000 blocks to go with PoW mining. you can either compile noblecoind under linux or run GUI under windows.

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: Rumhurius on March 05, 2015, 10:43:33 PM

real smooth and well done so far.

Pow Mining Rewards are just a bit low imo and you need to update the Opener with some Pools.

Are there some working Pools now at all ?
Solo Mining never was my cup of tea cause i always turn my rig off over night.

Good job anyway.
Kiss

Thank you.

PoW is temporary until PoS is stable.
Opener - still looking for someone to edit it. Any volunteers?
Pools - if someone wants to set it up, fine. But not sure if it makes sense for 3 weeks.
Solo mining is great. You almost feel like digging for gold in the ground Wink

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: Coretz on March 05, 2015, 09:09:12 PM

Hello, brand new to noble coin and I'm only lightly familiar with cryptomining in general. I've downloaded NobleCoin and I've attempted mining, but I haven't noticed any deposits so far.

A few questions:

1) I was wondering how best I can mine NOBLs?
2) Should I join a pool, and if so, what are some good pools that still work? I see a lot of dead links.
3) What is scantime?
4) How do I know when I've earned NOBLs thru mining?
5) Does anyone have any cheesecake here?

And if it helps any, my system is an i5-2500K @ 4.2 GHz with a GTX 650Ti BOOST 2GB graphics card.

Thank you all!

1. if under windows just use your wallet. I do not think it makes sense to invest lots of effort into setting up mining etc since our PoW mining will shut down in 3 weeks.
To start mining just type in console

Code:

setgenerate true 1

2. There is no pools AFAIK.
3. scantime?
4. Look at 'Recent transactions' or go to 'Transactions' and see if you mined 1000 coins.
5. Cheesecakes are overrated!

eagleflies

sr. member

Activity: 440

Merit: 251

Quote from: Lovethecoins on March 05, 2015, 08:37:46 PM

I am glad this was smooth... Everytime we get a run we run into fud... now this is complete it should be smooth sailing forward... What is the next project we have in mind? Has anyone contacted shapeshift.io and see if they would add noblecoin

The thing is we need more people to help:

- Re-design our OP. ideally someone who has experience with graphic design, but if you do not have such experience feel free to volunteer and we will do it
- Marketing specialist - someone to talk with other websites like shapeshift.io etc

Myself I prefer to focus on technical side and to some extent with educating people about PoS etc.

pikuchato

hero member

Activity: 728

Merit: 500

Activity: yes

Quote from: berbip on March 06, 2015, 04:59:12 AM

Getting pretty frustrated here.
C'ant get solo mining to work, makes me feel like a n00b again
my config
%appdata%/noblecoinpos/noblecoinpos.conf with following content

daemon=1
server=1
rpcport=55882
rpcallowip=192.168.*.*
rpcuser=
rpcpassword=

I'm using Wolfs optimized cpu miner
https://sourceforge.net/projects/coinmagi/files/m-miner/Wolf-m7m-cpuminer-V2/

content from startup.bat
minerd-x64-generic.exe -u -p --url http://127.0.0.1:55882

always getting rpc call failed.

Try this:

daemon=1
server=1
rpcport=55882
rpcallowip=127.0.0.1
rpcuser=x
rpcpassword=y

minerd-x64-generic.exe -u x -p y --url http://127.0.0.1:55882

Topic: NobleCoin[NOBL] - 8% PoS | 1Yr+ | MARKETPLACE | PAY | GIFT | CHARITIES/MERCHANTS - page 118. (Read 1053168 times)