Topic: [Not in Stock - Free Shipping] AntMiner U1 USB STICKS - US/Canada .042 unit - page 3. (Read 47126 times)

Anyone heard from iLuvPC today to see if he got his package delivered?

It would be the same size and type as the factory fuse but lower amp.  I don't remember the thread but it seems the factory fuse gets hot and not fast-acting enough that it gets welded onto the fuse port and melts the plastic housing (or something like that).  30A has been determined to be the sweet spot.  I got mine at Pep Boys.

this?
http://www.ebay.com/itm/5-pack-Fuse-30A-Automotive-Blade-ATO-/110487877574?pt=US_Car_Audio_Video_Fuses_Fuse_Holders&hash=item19b99737c6

I use 30A ATO automotive blade type fuse instead of the factory 40A for the 49-porters.

Do you guys use the same fuse that came with 49 port hub? I remember some users complaining about fuse overheating or burning when using BE sticks. Can these actually be fire hazard ? If yes, what precautions can I take?

Sorry been away from the forum a couple days. Was there a delay in this weeks shipping?

some hubs with some sticks can do a good 2.2gh ,but by and by 2.0 is the max.
He should also make sure the heat sink is tight I had a few loose ones.
Most likely it is a 'bad' one that will age quicker get hotter and die.
At least that is what the dead ones did with me.
  They ran less then perfect at 2.0 they ran hot and they died off.

 I have had a total of 7 or 8 with this problem and the other 4 or 5 got better with the cleaning and or sink tighten tricks.

From my testing and others, anything higher than 0981 is not attainable without a voltage increase.

Try in a hub by itself at a slower clock speed, on a separate mining session.
I have some that were clocking 75% error at 0A01 (2100), when clocked at 0981 (2000), they behave perfectly.

Hello Iluvpcs

sent you a PM signed transaction for 0.042 BTC  https://blockchain.info/tx/c5bc8a4d789e2632f4f7f89cd4563313569da2b0390e909430dc86e5a5aba95e

tHANKS, will try to cleanup and test again. Looks like it's the same USB, so probably not the port.

Same here I really want to get 5 or 6 more next batch.  I could only get one last batch and only had enough for two this batch but I was too late to order.

Great, gives me time to accumulate some BTC for a bigger purchase

Been told about 2.5 to 3 weeks, early in queue for 2 batches of the new units.

After this order how soon do you estimate ordering and receiving in your next batch?

Yes, thanks for the update. As soon as you have enough in stock, I want to place an order for 5.

Thanks for the update dude, just replied to your PM, just let me know and I'll shoot over the payment.

I only have about 2 dozen extra (I try to keep ~5% for RMA and lost package replacement).  I'm out right now.

They still have not arrived here's my UPS tracking info... they are in my town for all of today, I should have put a request in to go pick them up from UPS.

Wyoming, MI, United States    03/04/2014    5:00 P.M.    Emergency conditions beyond UPS' control.
   03/04/2014    8:49 A.M.    Destination Scan
   03/04/2014    8:18 A.M.    Arrival Scan
Lansing, MI, United States    03/04/2014    7:07 A.M.    Departure Scan
   03/04/2014    6:12 A.M.    Arrival Scan
   03/04/2014    6:00 A.M.    Late airplane.
Louisville, KY, United States    03/04/2014    4:59 A.M.    Departure Scan
   03/04/2014    12:18 A.M.    Import Scan
   03/04/2014    12:02 A.M.    Destination Scan
Louisville, KY, United States    03/02/2014    2:09 P.M.    Arrival Scan
Hapeville, GA, United States    03/02/2014    12:57 P.M.    Departure Scan
   03/02/2014    10:19 A.M.    Arrival Scan
   03/02/2014    7:12 A.M.    Registered with Clearing Agency. Shipment release pending Clearing Agency review. / Released by Clearing Agency. Now in-transit
Anchorage, AK, United States    03/01/2014    10:48 P.M.    Departure Scan
   03/01/2014    8:52 P.M.    Arrival Scan
Taoyuan, Taiwan    03/02/2014    5:07 A.M.    Departure Scan
   03/02/2014    3:00 A.M.    Arrival Scan
Chek Lap Kok, Hong Kong    03/02/2014    1:28 A.M.    Departure Scan
   03/01/2014    8:17 A.M.    Registered with Clearing Agency. Shipment release pending Clearing Agency review. / Shipment submitted to Clearing Agency, awaiting final release.
Shenzhen, China    03/01/2014    10:50 A.M.    Departure Scan
   03/01/2014    2:00 A.M.    Arrival Scan
   03/01/2014    1:55 A.M.    Departure Scan
Shenzhen, China    02/28/2014    7:50 P.M.    Origin Scan
Shenzhen, China    02/27/2014    4:50 P.M.   Order Processed: Ready for UPS

This page says "Not in Stock" in the title, does that mean that new orders aren't being accepted, or that they won't be processed for some time? I'm interested in 5-10 U1s, but am unsure whether I should send BTC now, or wait until that tag goes away. If anyone knows, I'd appreciate the feedback!

There is also this: https://bitcointalksearch.org/topic/experiments-in-overclocking-an-antminer-u1-449242

8 )