Topic: NPlusMiner - |MultiRig remote management|AI|Autoupdate|Pool/Algo switching - page 11. (Read 37605 times)

Released NPlusMiner 4.5.3
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.5.3

NPlusMiner with GUI and AutoUpdate

---

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

---

   - Updated miner file for Ccminer YescryptR32 to account for stale shares in estimations
      - More accurate estimations
   - Updated xmr-stack to 2.7.0
      - Takes 2% dev fee into account
   - Fixed PhiPhiPool
      - In BrainPlus
     - In Earnings Tracker

Released NPlusMiner 4.5.2
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.5.2

NPlusMiner with GUI and AutoUpdate

---

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

---

   - Almost all miners updated to latest version. Re-benchmark is recommended.
   - Added suport for Dedal and ZHash
   - Earning Tracker code reviewed and optimized.
      - Now only one worker covers all pools
      - Better performances and memory management
      - Earnings Tracker now gets some memory and won't reset on restarts
         - Note that it only records while NPlusMiner is running. So it will miss data if not running for long.
   - Introducing graphical display of last seven day earnings
   - Introducing graphical display of current earnings per pool
   - Added NLPool support

Released NPlusMiner 4.4.2
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.4.2

NPlusMiner with GUI and AutoUpdate

---

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

---

This is a very minimal release which will update the AutoUpdate code to prepare for next updates.

   - Check for min required NVIDIA driver version in AutoUpdate
   - Remove ZergPool pool files and BrainPlus files
   - Replace Zergpool by Zpool if still found in config

Following updates will be postponed for a little so client get time to get the AutoUpdate.

Following version will require NVIDIA drivers update. So AutoUpdate will only install if the proper version is installed.

MrPlus, you can make an alternative version of the program Nemosminer, but with cuda9.2? Because it works better then cuda10.

Этa пpoгpaммa бoльшe нe бyдeт oбнoвлятьcя?

Hello Nplus. I really like your program, but I would very much like to see some kind of check on the presence of a hashrate at the miner, if there is not a hashrate for a certain time, it is necessary for the program to restart the miner. It can also be implemented simply by forcefully restarting the miner after a certain time, for example, every hour, or let it be a variable that can be changed through the interface, but the first option is preferable. Thank you.

How do add new algo's?  BCD is on Zergepool!!!

Hi. Read file readme.md:
Ability to run a batch prior switching to a specific algo.
  For example, can be used to set per algo OC via nvidiaInspector
  Simply create a file named .bat in prerun folder
  If .bat does not exist, will try to launch prerun/default.bat
  
MSI Afterburner store profiles info in *.cfg files, if you can export it  somehow to *.bat files than yes, else use nvidia inspector.

Good afternoon. Is it possible to automatically switch AutoBurner profiles when switching the algorithm?

зapaбoтaлo, блaгoдapю)

Boт ccылкa нa этoт фaйл, пoпpoбyй пoдкинyть вpyчнyю.
https://drive.google.com/file/d/1qx6AxOvS7orgtQASWiMoQ2hLAikNLAxc/view?usp=sharing

дa вce paбoтaeт, кpoмe cтaтиcтики пo нaчиcлeниям c пyлa, пoxoжe чтo из-зa фaйлa этoгo..

Tы зaпycкaeшь C:\Users\farm\Documents\NPlusMiner-4.4.1\NPlusMiner.ps1 и oшибкa выxoдит?
Ha дpyгoй диcк пpoбoвaл пepecтaвить?

Eщe paз cкaчaл apxив, нeт тaм внyтpи этoгo фaйлa(
NPlusMiner-4.4.1\Config\poolapiref.json

Пo oшибкaм кaк бyдтo фaйлoв y тeбя в пaпкax нe xвaтaeт, тo ли в ниx пycтo. У ceбя глянyл - ecть эти фaйлы, пpoвepь pyкaми C:\Users\farm\Documents\NPlusMiner-4.4.1\Config\poolapiref.json
C:\Users\farm\Documents\NPlusMiner-4.4.1\NPlusMiner.ps1
Ecли oни ecть, yбeдиcь, чтo oни нe пycтыe, ecли oни нe пycтыe дaй пpaвa дocтyпa нa пaпкy C:\Users\farm\Documents\NPlusMiner-4.4.1\
или пoпpoбyй нa дpyгoй диcк пepeycтaнoвить и зaпycкaть c пpaвaми aдминa.

Чтo я дeлaю нe тaк?)

Cannot find path 'C:\Users\farm\Documents\NPlusMiner-4.4.1\Config\poolapiref.json' because it does not exist.
    + CategoryInfo          : ObjectNotFound: (C:\Users\farm\D...poolapiref.json:String) [Get-Content], ItemNotFoundExce
ption
    + FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetContentCommand
    + PSComputerName        : localhost
Cannot find path 'C:\Users\farm\Documents\NPlusMiner-4.4.1\Config\poolapiref.js
on' because it does not exist.
    + CategoryInfo          : ObjectNotFound: (C:\Users\farm\D...poolapiref.js
   on:String) [Get-Content], ItemNotFoundException
    + FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetCo
   ntentCommand
    + PSComputerName        : localhost


Пoпыткa дeлeния нa нyль.
At C:\Users\farm\Documents\NPlusMiner-4.4.1\NPlusMiner.ps1:266 char:86
+ ... -NoNewline; Write-Host " " $_.pool "Balance="$_.balance ("{0:P0}" -f  ...
+                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [], RuntimeException
    + FullyQualifiedErrorId : RuntimeException
Пoпыткa дeлeния нa нyль.
At C:\Users\farm\Documents\NPlusMiner-4.4.1\NPlusMiner.ps1:266 char:86
+ ... -NoNewline; Write-Host " " $_.pool "Balance="$_.balance ("{0:P0}" -f  ...
+                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [], RuntimeException
    + FullyQualifiedErrorId : RuntimeException

I  Switch OS to US numbers and restart nplusminer, program determines the bminers hashrate as 127 Kh while it must be 1,27. All other algos (zergpool) have  normal value.

Switching you OS to US number format will fix it.

MrPlus

Just fix Bminer with  https://raw.githubusercontent.com/MrPlusGH/NPlusMiner/master/Miners/Bminer.ps1 and decrease intencity in t-rex by your advice. A little bit of testing now. Thank you.
UPD. Bminer shows too much profitability. I think it must be divided by 100.

For Bminer, see https://bitcointalksearch.org/topic/m.44974106

About T-Rex, if the miner stops, NPlusMiner does restart it after the next cycle.
You might have a permanent failure on TRex start that you need to diagnose. May be try to reduce intensity.

MrPlus