Bitcoin Forum>Bitcoin>Mining>Mining software (miners)
Pages:
Author

Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 90. (Read 5805649 times)

Micky25
legendary
Activity: 974
Merit: 1000
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 13, 2014, 02:43:55 PM
#15076
Quote from: LARTAS on June 13, 2014, 01:43:14 PM
Hi
My terraminer which is good
One CTA is showing high temperatures
CTA0 Metrics             High   Low          Avg
Core Temp 1 (°C)   91.14   63.74   77.77
Core Temp 2 (°C)   64.54   56            59.57
Ambient Temp (°C)   65.5           56          59.93
Fan Speed (RPM)   4782   4248   4,542
Pump Speed (RPM)   2990   2967   2,979

Who can help me? Before it get worst

CoinTerra Support (CoinTerra)
May 13 15:23
The temps are operating in the expected range. It will not have an issue until 120C at which time it will shut itself off.
Regards,
Marshall

Comments: Hi, I have a very high difference on the temperatures of CTA0 and CTA1. Is there something I can do about this?
Thanks and best regards, Micky25
CTA0 Metrics High Low Avg
Core Temp 1 (°C) 108.49 76.79 87.35
Core Temp 2 (°C) 100.19 82.66 87.87
Ambient Temp (°C) 65.25 57.5 60.68
Fan Speed (RPM) 4122 3994 4,038
Pump Speed (RPM) 2991 2954 2,973
CTA1 Metrics High Low Avg
Core Temp 1 (°C) 64.23 55.89 60.13
Core Temp 2 (°C) 58.41 52.3 55.29
Ambient Temp (°C) 49.75 45.25 48.31
Fan Speed (RPM) 4225 4150 4,188
Pump Speed (RPM) 2952 2941 2,947

]
LARTAS
newbie
Activity: 25
Merit: 0
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 13, 2014, 01:43:14 PM
#15075
Hi
My terraminer which is good
One CTA is showing high temperatures
CTA0 Metrics             High   Low          Avg
Core Temp 1 (°C)   91.14   63.74   77.77
Core Temp 2 (°C)   64.54   56            59.57
Ambient Temp (°C)   65.5           56          59.93
Fan Speed (RPM)   4782   4248   4,542
Pump Speed (RPM)   2990   2967   2,979

Who can help me? Before it get worst
norgan
sr. member
Activity: 308
Merit: 250
Decentralize your hashing - p2pool - Norgz Pool
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 13, 2014, 04:47:31 AM
#15074
Quote from: mdude77 on June 13, 2014, 04:17:32 AM
Quote from: kano on June 13, 2014, 03:37:00 AM
Quote from: norgan on June 13, 2014, 12:08:53 AM
Quote from: canford on June 12, 2014, 11:57:13 PM
Quote from: norgan on June 12, 2014, 08:01:58 PM
are we able to update the cgminer on the s1 or is it best to leave with the older build?

https://github.com/kanoi/cgminer-binaries/tree/master/AntS1

yeah thanks I know about that one. but I just wondered if the main fork that says it supports s1 could be used to keep it more up to date. (I just like to have the latest lol)
I'll not update the S1 until I've sorted out the S2 issues - since I've no idea if those issues will affect the S1 also - and the last S1 release is pretty stable.

S1 patch works great with p2pool.  So I don't think the issues affect the S1.

M

yeah there's nothing wrong with the current s1 build. I am just one of those who love to know I am running the very latest code. haha
mdude77
legendary
Activity: 1540
Merit: 1001
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 13, 2014, 04:17:32 AM
#15073
Quote from: kano on June 13, 2014, 03:37:00 AM
Quote from: norgan on June 13, 2014, 12:08:53 AM
Quote from: canford on June 12, 2014, 11:57:13 PM
Quote from: norgan on June 12, 2014, 08:01:58 PM
are we able to update the cgminer on the s1 or is it best to leave with the older build?

https://github.com/kanoi/cgminer-binaries/tree/master/AntS1

yeah thanks I know about that one. but I just wondered if the main fork that says it supports s1 could be used to keep it more up to date. (I just like to have the latest lol)
I'll not update the S1 until I've sorted out the S2 issues - since I've no idea if those issues will affect the S1 also - and the last S1 release is pretty stable.

S1 patch works great with p2pool.  So I don't think the issues affect the S1.

M
kano
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 13, 2014, 03:37:00 AM
#15072
Quote from: norgan on June 13, 2014, 12:08:53 AM
Quote from: canford on June 12, 2014, 11:57:13 PM
Quote from: norgan on June 12, 2014, 08:01:58 PM
are we able to update the cgminer on the s1 or is it best to leave with the older build?

https://github.com/kanoi/cgminer-binaries/tree/master/AntS1

yeah thanks I know about that one. but I just wondered if the main fork that says it supports s1 could be used to keep it more up to date. (I just like to have the latest lol)
I'll not update the S1 until I've sorted out the S2 issues - since I've no idea if those issues will affect the S1 also - and the last S1 release is pretty stable.
Buchi-88
legendary
Activity: 3990
Merit: 2695
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 13, 2014, 03:13:31 AM
#15071
Good day,

i have an existing problem with my configuration:

8 x Antminer U2 +
8 x BFx2 Bitfury

as soon as I both operate (. / configure - enable-bitfury - enable-icarus) remains Cgminer hang over again, and "watchdog" restarts the Raspberry new!

Once I only BFx2 Bitfury (. / Configure - enable-bitfury) used, runs the Cgminer 24/7.
Code:
0: BXM 0       :                         | 3.810G / 3.751Gh/s WU:52.9/m
 1: BXM 1       :                         | 2.394G / 3.187Gh/s WU:44.6/m
 2: BXM 2       :                         | 3.136G / 3.167Gh/s WU:44.6/m
 3: BXM 3       :                         | 2.990G / 3.006Gh/s WU:42.1/m
 4: BXM 4       :                         | 3.767G / 3.819Gh/s WU:53.7/m
 5: BXM 5       :                         | 3.894G / 3.919Gh/s WU:55.0/m
 6: BXM 6       :                         | 3.952G / 3.932Gh/s WU:55.5/m
 7: BXM 7       :                         | 3.804G / 3.867Gh/s WU:54.4/m
--------------------------------------------------------------------------------
 [2014-06-12 23:19:41] Zero length string passed to valid_hex from in util.c ini
tiate_stratum():2609
 [2014-06-12 23:19:41] Zero length string passed to valid_hex from in util.c ini
tiate_stratum():2609


Exactly the same is in the use of Antminer (. / Configure - enable-icarus)?

The problem is only with the simultaneous use, is it possibly there is a compatibility issue between the two drivers?

I had raised the issue before, but still wanted to thoroughly test!

On the Pi is the newest Kernel installed.

regards
canford
member
Activity: 89
Merit: 10
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 13, 2014, 12:23:49 AM
#15070
Quote from: norgan on June 13, 2014, 12:08:53 AM
Quote from: canford on June 12, 2014, 11:57:13 PM
Quote from: norgan on June 12, 2014, 08:01:58 PM
are we able to update the cgminer on the s1 or is it best to leave with the older build?

https://github.com/kanoi/cgminer-binaries/tree/master/AntS1

yeah thanks I know about that one. but I just wondered if the main fork that says it supports s1 could be used to keep it more up to date. (I just like to have the latest lol)

Not sure, I think you'd have to build the binary for the S1 yourself.  Kano might update github with an updated version, though I'm not aware of any S1-related improvements.  My AntMiners are all running 4.3.2a from Kano's build.
norgan
sr. member
Activity: 308
Merit: 250
Decentralize your hashing - p2pool - Norgz Pool
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 13, 2014, 12:08:53 AM
#15069
Quote from: canford on June 12, 2014, 11:57:13 PM
Quote from: norgan on June 12, 2014, 08:01:58 PM
are we able to update the cgminer on the s1 or is it best to leave with the older build?

https://github.com/kanoi/cgminer-binaries/tree/master/AntS1

yeah thanks I know about that one. but I just wondered if the main fork that says it supports s1 could be used to keep it more up to date. (I just like to have the latest lol)
canford
member
Activity: 89
Merit: 10
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 12, 2014, 11:57:13 PM
#15068
Quote from: norgan on June 12, 2014, 08:01:58 PM
are we able to update the cgminer on the s1 or is it best to leave with the older build?

https://github.com/kanoi/cgminer-binaries/tree/master/AntS1
norgan
sr. member
Activity: 308
Merit: 250
Decentralize your hashing - p2pool - Norgz Pool
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 12, 2014, 08:01:58 PM
#15067
are we able to update the cgminer on the s1 or is it best to leave with the older build?
plekhanov
newbie
Activity: 20
Merit: 0
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 12, 2014, 06:18:54 PM
#15066
I tried building 4.3.5 on Centos 6.4 x86_64 (2.6.32-431.17.1.el6.x86_64) with Antminer S1 support.  The build stops in the bitmain driver:

  CC     cgminer-driver-bitmain.o
driver-bitmain.c: In function 'bitmain_read':
driver-bitmain.c:940: error: 'struct bitmain_info' has no member named 'device_fd'
driver-bitmain.c: In function 'bitmain_write':
driver-bitmain.c:971: error: 'struct bitmain_info' has no member named 'device_fd'
driver-bitmain.c: In function 'bitmain_parse_results':
driver-bitmain.c:1316: error: request for member 'min' in something not a structure or union
make[2]: *** [cgminer-driver-bitmain.o] Error 1

kano
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 12, 2014, 04:29:49 AM
#15065
Quote from: dmaxl on June 11, 2014, 09:34:50 PM
Quote from: kano on June 11, 2014, 07:48:50 PM
However, yes I tried p2pool early (3am) this morning and indeed everything exploded into a mess of errors both on the S2 and p2pool
Will look into that ...

I'll save you some time because I ran into this same issue, albeit with litecoin but the cause should be the same.

The cause is the sanity checks introduced by commit e1c5050734123973b99d181c45e74b2cbb00272e.
Empty string extranonce1 values now cause an error in util.c near line 2581:
Code:
nonce1 = json_array_string(res_val, 1);
if (!valid_hex(nonce1)) {
    applog(LOG_INFO, "Failed to get valid nonce1 in initiate_stratum");
    free(sessionid);
    goto out;
}

P2pool doesn't implement extranonce1 and sends an empty string, causing initiate_stratum to fail and cgminer to fallback to longpoll, which doesn't work with p2pool. Arguably this is more of a p2pool problem, but a possible workaround would be to restore previous behavior which just checks that nonce1 != NULL.
Unfortunately, that's not the actual problem.
That's simply an unnecessary warning on the screen that ckolivas has now removed due to your help pointing it out.

I did mean this seriously:
Quote
... indeed everything exploded into a mess of errors both on the S2 and p2pool ...
I've not had time to track it down yet ...
iglasses
legendary
Activity: 1148
Merit: 1000
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 11, 2014, 10:33:03 PM
#15064
Quote from: -ck on June 11, 2014, 11:29:52 AM
Quote from: iglasses on June 11, 2014, 11:22:48 AM
Can someone tell me what the heck I am doing wrong...I am trying to use the enable ants1 command at startup but I'm obviously not formatting it correctly because I keep getting 'unrecognized option'.

I am trying to use it like this...
cgminer --enable-ants1

What am I missing here?
The --enable-ants1 option is for when you build cgminer, not when you run it.

Well don't I feel like a dam fool. 
Thanks though!

ig
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 11, 2014, 09:42:30 PM
#15063
Quote from: dmaxl on June 11, 2014, 09:34:50 PM
Quote from: kano on June 11, 2014, 07:48:50 PM
However, yes I tried p2pool early (3am) this morning and indeed everything exploded into a mess of errors both on the S2 and p2pool
Will look into that ...

I'll save you some time because I ran into this same issue, albeit with litecoin but the cause should be the same.

The cause is the sanity checks introduced by commit e1c5050734123973b99d181c45e74b2cbb00272e.
Empty string extranonce1 values now cause an error in util.c near line 2581:
Code:
nonce1 = json_array_string(res_val, 1);
if (!valid_hex(nonce1)) {
    applog(LOG_INFO, "Failed to get valid nonce1 in initiate_stratum");
    free(sessionid);
    goto out;
}

P2pool doesn't implement extranonce1 and sends an empty string, causing initiate_stratum to fail and cgminer to fallback to longpoll, which doesn't work with p2pool. Arguably this is more of a p2pool problem, but a possible workaround would be to restore previous behavior which just checks that nonce1 != NULL.
Thanks for that, it's more lenient now in git.
dmaxl
newbie
Activity: 1
Merit: 0
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 11, 2014, 09:34:50 PM
#15062
Quote from: kano on June 11, 2014, 07:48:50 PM
However, yes I tried p2pool early (3am) this morning and indeed everything exploded into a mess of errors both on the S2 and p2pool
Will look into that ...

I'll save you some time because I ran into this same issue, albeit with litecoin but the cause should be the same.

The cause is the sanity checks introduced by commit e1c5050734123973b99d181c45e74b2cbb00272e.
Empty string extranonce1 values now cause an error in util.c near line 2581:
Code:
nonce1 = json_array_string(res_val, 1);
if (!valid_hex(nonce1)) {
    applog(LOG_INFO, "Failed to get valid nonce1 in initiate_stratum");
    free(sessionid);
    goto out;
}

P2pool doesn't implement extranonce1 and sends an empty string, causing initiate_stratum to fail and cgminer to fallback to longpoll, which doesn't work with p2pool. Arguably this is more of a p2pool problem, but a possible workaround would be to restore previous behavior which just checks that nonce1 != NULL.
kano
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 11, 2014, 08:57:37 PM
#15061
Quote from: Kuma on June 11, 2014, 12:01:53 PM
Hi Kano,
your FW for S2 works great on Ozco.in and Ghash.io pools but its nearly impossible to use Eligius pool.
Anyway thanks a lot.

I'm banned from posting in Eligius since wizkid didn't like people knowing the crap their pool does and deleted my posts.
So ... Eligius is low priority.

I still wonder why Eligius keeps such a high balance ...
https://blockchain.info/address/18d3HV2bm94UyY4a9DrPfoZ17sXuiDQq2B >400BTC
https://blockchain.info/address/1ChANGeATMH8dFnj39wGTjfjudUtLspzXr >200BTC
https://blockchain.info/address/14qgRxmyWwRweGY4mfjB5FRxr3Ak8Weu1w 1000 BTC
https://blockchain.info/address/1BRoZJLeLaR9T4PP2m1FJ5isqgQmhzMKBn 99.999 BTC

https://blockchain.info/address/18g3xd6WiEn6Wc88EK2B3oMnG7Y6KKwehM
That's an interesting payout

This one is interesting how it splits up a large amount into smaller and smaller amounts
https://blockchain.info/address/16qN6Xcm9tKoDTfeLjan5dgCEsDhWTxizK
kano
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 11, 2014, 07:48:50 PM
#15060
Quote from: PatMan on June 11, 2014, 11:02:00 AM
Thanks for the info Kano. Just to clarify, in order to override the default "--queue 320" options, I can simply add "--queue 0" (required for p2pool) to the script you mentioned in /config/cgminer - this will then override the default commands? Have I got that right?  Or, can I simply add "-Q 0" after the password on the web interface as with the S1 fix?

Of course, I wont do this until you've investigated the p2pool issue. Just planning ahead  Wink
The S1 hack wont work on the S2.
The S2 uses a real cgminer.conf and updates it via the web interface - so it really would put it "in" the password

So yes you'll need to do the script override.
You can simply make the line:
 myopt="-Q 0"
and then it will use all the parameters supplied by the init script but add -Q 0 on the end to override the previous --queue

However, yes I tried p2pool early (3am) this morning and indeed everything exploded into a mess of errors both on the S2 and p2pool
Will look into that ...
Kuma
member
Activity: 107
Merit: 10
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 11, 2014, 12:01:53 PM
#15059
Hi Kano,
your FW for S2 works great on Ozco.in and Ghash.io pools but its nearly impossible to use Eligius pool.
Anyway thanks a lot.
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 11, 2014, 11:29:52 AM
#15058
Quote from: iglasses on June 11, 2014, 11:22:48 AM
Can someone tell me what the heck I am doing wrong...I am trying to use the enable ants1 command at startup but I'm obviously not formatting it correctly because I keep getting 'unrecognized option'.

I am trying to use it like this...
cgminer --enable-ants1

What am I missing here?
The --enable-ants1 option is for when you build cgminer, not when you run it.
iglasses
legendary
Activity: 1148
Merit: 1000
Re: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0
June 11, 2014, 11:22:48 AM
#15057
Can someone tell me what the heck I am doing wrong...I am trying to use the enable ants1 command at startup but I'm obviously not formatting it correctly because I keep getting 'unrecognized option'.

I am trying to use it like this...
cgminer --enable-ants1

What am I missing here?
Pages:
Bitcoin Forum>Bitcoin>Mining>Mining software (miners)
Jump to: