Topic: Official FutureBit Moonlander 2 Driver and Support Thread - page 63. (Read 71717 times)

it will be a false positive. most virus scanners flag up mining software as malware.
host unresolved would normally mean your mining pool is type the pool and port into your browser to check that.
Add pause to the end of your bat file, then it will not close automatically in the event of an error
maybe an error with your mining pool settings i suspect or antivirus blocking bfgminer. you can disable the virus scanner and try again

Sounds like your antivirus/firewall software is blocking internet access to bfgminer. Check your software and make sure access is enabled for bfgminer.

I just got my first miner today and I have spent last few hours with NO RESULTS I got a Virus warning from AVG when I opened BFGMINER from this thread a Malware Gen it says I attached s screen capture...
below is my batch file and I keep getting host unresolved error even when I run the test bat that came with the program the Start_Moonlander2 gives same host unresolved. I cut and paste my pool address and bat file was created by their config generator on their site so I don't see why I get these errors here is my info:
user is rwg4th miner is Mack and his password is jingle all in the bat file below... where am I going wrong? and is that really a virus or is it false positive? I can't attach image it seems but I'll upload it somewhere if you want or just scan bfgminer with AVG and you will see its got a Win64 malware gen virus



bfgminer.exe --scrypt -o stratum+tcp://stratum.aikapool.com:7915 -u rwg4th.Mack -p jingle

and again I tried to mine NYC Coin which is also a scrypt and I mine there using CPU already so I know this address is good but still I get "Unresolved host" error

bfgminer --scrypt -o stratum+tcp://eu1.altminer.net:3433 -u RQkUXUFfDHR9u8wxG9vRjwyhq8YvzmuXQT -p c=NYC

where username is wallet address and password is NYC for new york coin this works fine in CPUMiner with same address so unresolved doesn't make sense maybe the card is defective? the driver loaded ok and its shown in printers and devices with no exclamation mark looks ok there can't find where it went in device manager I saw it when drivers weren't all in yet and after I updated drivers it disappeared and I opened all groups but didn't see it anywhere (which group should it be in?)

do u mean each MLD mine different coin? or each using different worker name? if its about different coin, u can try check page 45. if worker name just edit like a normal .bat file

If your putting on thermal material its only to fill in the via holes, please check the assembly instructions...that is way more than enough. Don't put a layer on there like you would with a CPU otherwise the heatsink wont stick and it will fall off and you'll most likely be left with a fried miner.

Please keep order related stuff in the order thread linked in OP.

Anyone try Thermal Grizzly on the moonlander 2?

https://www.amazon.com/Thermal-Grizzly-Kryonaut-Grease-Paste/dp/B011F7W3LU/ref=sr_1_1?s=electronics&ie=UTF8&qid=1517072281&sr=1-1&keywords=thermal+grizzly+kryonaut

I'm wondering is 1gram will be enough for 4 moonlanders?  My order for AsicPuppy should be arriving soon, and I want to make sure I have enough on hand.

My order from HolyBitcoin should be here today or Monday according to tracking. My order from AsicPuppy has a tracking number but there hasn't been any update on tracking as of yet.

I expect to have all my orders in by Wednesday if all goes well.

 

Anyone from Batch 2 receive yours yet?

Probably. But regardless, once the 'screen' session is stopped and restarted in linux, you will still have to reattach the screen but either way you can try this:

Follow those tips in the other thread I created and pay attention to what you name the process. i.e.; 'moonlander', 'miner', etc... whatever you choose.

Then in CRON create one for this.

sudo systemctl restart moonlander of course 'moonlander' would be replaced with whatever you call the service when it is booted initially.

That way if the power goes down and then comes back up and your not around, the ML2 will still restart on reboot which will ensure it stays running and will restart the service (process) and you can just sudo screen -r to bring the interface back up when you want to view it.

Can you share with us the model and brand name of the fan..

Thx.

do you know if its possible to do it without having to reboot the PI, i see in this guys thread that it will execute the script while the PI is booting, i would like the script to boot within the Pi desktop not before as i would like the command window to be displayed?

regards

Paul

Been using the Pluggable 7 port hubs so it's entirely possible that the port failed... waiting on my Eyeboot hubs to get here lol

Yea who knows. Thats the issue with cheap hubs that are not designed for high current draw from USB miners. The sticks themselves are build like tanks, so unless you do something seriously stupid the root cause of a problem will most likely be power/hub related.

Yeah I got the 10k ones, couldn't find lower.

I tried a 15k and those were seriously loud.

On a side note, I have zero explanation as to why -- I threw the Asic I thought that was dead on a different hub after not using it for a few days and its been working for like a week now. I'm now wondering if the 100% HW error and extremely low hashrate rate was being caused by something else, perhaps the port on the hub I was using.

Maybe you could follow this thread to have it auto run after reboot in detached screen and then just set up a cron job every xx hours to 'sudo reboot'

Hey Everyone,

another quick question, i have 4 moonlanders on my RPI running, i am having a issue where after a few hours the start_moonlander2.sh freezes and stops hashing.. does anyone know how to write a Cronjob tab so that the SH script can close once every hour and restart?

if anyone could give me an example of how i should setup in the configure scheduled tasks within Gnome Schedule 2.1.1 GUI

Any help would be really appreciated.

Hello,

   I have 10 MLDs on a powered USB data hub.  Everything seems to be working fine at the moment...  What I am looking to find out is, can I make each MLD a separate worker?  Anyone know how to do that (if possible)?


thanks
George

Your in the right place, what is the issue your having?

Yes those errors are either related with a pool issue or network issue.