OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 25.

thefrog

sr. member

Activity: 393

Merit: 250

Quote from: jcgeny on March 04, 2014, 02:05:51 AM

i use your software on two computer of my lan but it behaves differently on the two .
the main pc for bitcoining is a mainboard sabertooth x79 with 3 nvidia gtx570 in sli mode [may be that count ? : sli]
it also has bitcoin-qt.exe and run_p2pool.exe running
i launch the program with :
bfgminer.exe -S opencl:auto -o http://127.0.0.1:9332 -u username -p password --disable-rejecting

when i look at taskmanager processes tab : bfgminer.exe uses a cpu at nearly full load all time and also 319852k of memory
the second pc is a supermicron dual cpu chipset 5520 intel with two xeon and two hd5970 plus one gtx560ti .
[ i tried to use bfgminer for the nvidia but found not how to use --platform parameter so i make it bitcoining with diablo that uses a cpu at full load and 69264k + 1512k for a 32b exe]
the two ati are giving 1Gh/s without any overclock , bfgminer.exe is most of the time using 0% of cpu and only 92836 k of memory
the way i launch the program is :
bfgminer.exe -S opencl:auto -o http://192.168.1.2:9332 -u username -p password --disable-rejecting

is it normal ?
last thing i want to know : the gtx570 , not overclocked , are making around 170 Mh/s while the ati are making 235 Mh/s per gpu
do i have to tweak os or bios for the nvidia or an other software to have better Mh/s ?

I can not imagine you make any money with this, mining BTC.
Would scrypt based coins not be better ?

jcgeny

newbie

Activity: 24

Merit: 0

i use your software on two computer of my lan but it behaves differently on the two .
the main pc for bitcoining is a mainboard sabertooth x79 with 3 nvidia gtx570 in sli mode [may be that count ? : sli]
it also has bitcoin-qt.exe and run_p2pool.exe running
i launch the program with :
bfgminer.exe -S opencl:auto -o http://127.0.0.1:9332 -u username -p password --disable-rejecting

when i look at taskmanager processes tab : bfgminer.exe uses a cpu at nearly full load all time and also 319852k of memory
the second pc is a supermicron dual cpu chipset 5520 intel with two xeon and two hd5970 plus one gtx560ti .
[ i tried to use bfgminer for the nvidia but found not how to use --platform parameter so i make it bitcoining with diablo that uses a cpu at full load and 69264k + 1512k for a 32b exe]
the two ati are giving 1Gh/s without any overclock , bfgminer.exe is most of the time using 0% of cpu and only 92836 k of memory
the way i launch the program is :
bfgminer.exe -S opencl:auto -o http://192.168.1.2:9332 -u username -p password --disable-rejecting

is it normal ?
last thing i want to know : the gtx570 , not overclocked , are making around 170 Mh/s while the ati are making 235 Mh/s per gpu
do i have to tweak os or bios for the nvidia or an other software to have better Mh/s ?

worldlybedouin

sr. member

Activity: 376

Merit: 250

Quote from: nwoolls on February 25, 2014, 12:24:22 PM

Quote from: darkfriend77 on February 25, 2014, 11:04:13 AM

Quote from: Blueman666 on February 25, 2014, 10:52:19 AM

Luke are you considering adding support for the gridseed 5 chip miner?

It is selling like hotcakes but has rather poor software support. bfgminer would be magic...

+1

very interested in this.

Support for the single-chip thumbs is completed and submitted to Luke as a pull-request for 4.0:

https://github.com/nwoolls/bfgminer/tree/feature/dualminer-support

Support for the 5-chip miners is under way as well.

Just saw this and +1 to Gridseed 5-chip miner support!

movellan

full member

Activity: 368

Merit: 100

Quote from: Cassey on March 02, 2014, 03:10:07 PM

Quote from: movellan on March 02, 2014, 03:04:21 PM

Cassey, what's the "--balance" parameter for? TIA.

./bfgminer --help gives the basics, but the github README, in about the middle, tells the full story.

Anyhow, --balance causes my hashes to be split between the two pools rather than just having pool 2 as a failover site. I actually have some miner rigs balanced between 6 pools. That can be useful, for instance, if you want to explore some newbie coins - just allocate one rig to hit multiple newbie pools.

There is a --load-balance option as well, which you can use with quotas. For instance, you might give your for-profit pool a quota of 70, and three exploratory pools a quota of 10 yeah, and a friends pool a quota of 5 just so you show up there occasionally for support! Alas, I'm seeing some performance problems, or at least reporting problems, when I use quotas, but in theory they would be great for multi pool usage.

Thanks, Cassey. A logical and consise explanation. I had seen the term mentioned here earlier and was wondering if I was missing something. I use only one pool, so not necessary for my needs.

Cassey

sr. member

Activity: 470

Merit: 250

Better to have 100 friends than 100 rubles

Quote from: movellan on March 02, 2014, 03:04:21 PM

Cassey, what's the "--balance" parameter for? TIA.

./bfgminer --help gives the basics, but the github README, in about the middle, tells the full story.

Anyhow, --balance causes my hashes to be split between the two pools rather than just having pool 2 as a failover site. I actually have some miner rigs balanced between 6 pools. That can be useful, for instance, if you want to explore some newbie coins - just allocate one rig to hit multiple newbie pools.

There is a --load-balance option as well, which you can use with quotas. For instance, you might give your for-profit pool a quota of 70, and three exploratory pools a quota of 10 yeah, and a friends pool a quota of 5 just so you show up there occasionally for support! Alas, I'm seeing some performance problems, or at least reporting problems, when I use quotas, but in theory they would be great for multi pool usage.

movellan

full member

Activity: 368

Merit: 100

Quote from: Cassey on March 01, 2014, 08:09:18 PM

Quote from: AngusCanine on March 01, 2014, 07:56:05 PM

Quote from: Cassey on March 01, 2014, 07:39:05 PM

Quote from: AngusCanine on March 01, 2014, 07:16:34 PM

I cant get bfg to find antminer u1 says "no devices found" any help with this one. also when running cgminer 4.0.1 what should the bat file say when overclocking ?

1st) Make sure your running bfgminer 3.10.0 - prior releases don't have antminer support.
2nd)9Should do it for you, overclocking them up to about 2 GH, where most are reasonably stable without mods (make sure you have enough power)
3rd) This is a bfgminer thread, don't expect much cgminer support

my bad sorry guys when im running 3.10.0 what is the enter target: (value?) and if I use this ( ./bfgminer -S antminer:all --set-device antminer:clock=x0981 ) where do I put the info?

./bfgminer -S antminer:all --set-device antminer:clock=x0981 --balance -o stratum+tcp://us-east.multipool.us:8888 -O Cassey.miner2am:x -o stratum+tcp://multicoin.zapto.org:3320 -O Cassey.miner2am:x

That is all you should need for antminer U1s. The above is my complete command line, with no config file. Feel free to use it exactly (I'll appreciate the extra hash credits )

Cassey, what's the "--balance" parameter for? TIA.

Luke-Jr

legendary

Activity: 2576

Merit: 1186

BTW, if anyone is going to the Texas Bitcoin Conference this coming week, be sure to not miss the Future of Mining panel.

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: JBT on March 02, 2014, 11:16:10 AM

Quote from: jedimstr on March 02, 2014, 10:15:05 AM

Been running stable with my Drillbits using BFGMiner for months. Missed the memo?

which drivers should i be using for drillbitboards, cause it is not seeing my board, which means i install the wrong one

ed. board on strike with setting 53:2:950

I don't think I installed any special drivers.
I'm running mine off a BeagleBoneBlack with Debian Linux installed.

I just found the paths from using the -d? -S drillbit:all option and then manually specified the paths in my Conf file so I could manually control which board got which optimal overclock settings.

Did the same from my Mac for controlling my thumbs, but I have the usual SILabs drivers active on that box since I also have Antminers, bi*fury, and RedFury connected.

JBT

full member

Activity: 165

Merit: 100

Quote from: jedimstr on March 02, 2014, 10:15:05 AM

Been running stable with my Drillbits using BFGMiner for months. Missed the memo?

which drivers should i be using for drillbitboards, cause it is not seeing my board, which means i install the wrong one

ed. board on strike with setting 53:2:950

jedimstr

hero member

Activity: 798

Merit: 1000

Been running stable with my Drillbits using BFGMiner for months. Missed the memo?

freddyfarnsworth

full member

Activity: 238

Merit: 100

SiLabs drivers. for BFGminer

AngusCanine

legendary

Activity: 1414

Merit: 1001

To weird to live To rare to die

Quote from: jedimstr on March 01, 2014, 09:19:25 PM

Quote from: AngusCanine on March 01, 2014, 09:08:43 PM

Quote from: AngusCanine on March 01, 2014, 09:05:14 PM

Quote from: freddyfarnsworth on March 01, 2014, 09:03:18 PM

In windows yes.

not working just closes immediately

ok I tried with your setup says no devices found when miner starts? doesn't recognize the miners

Did you install the VCP drivers? BFGMiner needs them to run the Antminers and Block Erupters.
http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

And since you mentioned CGminer before, if you have Zadig installed drivers, you have to uninstall those first.

ahh k so what do I use?

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: AngusCanine on March 01, 2014, 09:08:43 PM

Quote from: AngusCanine on March 01, 2014, 09:05:14 PM

Quote from: freddyfarnsworth on March 01, 2014, 09:03:18 PM

In windows yes.

not working just closes immediately

ok I tried with your setup says no devices found when miner starts? doesn't recognize the miners

Did you install the VCP drivers? BFGMiner needs them to run the Antminers and Block Erupters.
http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

And since you mentioned CGminer before, if you have Zadig installed drivers, you have to uninstall those first.

Cassey

sr. member

Activity: 470

Merit: 250

Better to have 100 friends than 100 rubles

Quote from: AngusCanine on March 01, 2014, 09:08:43 PM

Quote from: AngusCanine on March 01, 2014, 09:05:14 PM

Quote from: freddyfarnsworth on March 01, 2014, 09:03:18 PM

In windows yes.

not working just closes immediately

ok I tried with your setup says no devices found when miner starts? doesn't recognize the miners

What do you have the miners plugged into? Most cheap USB strips do not have sufficient power to run more than one or two.

Figure 500ma per U1 if your overclocking to 2GHz.

AngusCanine

legendary

Activity: 1414

Merit: 1001

To weird to live To rare to die

Quote from: AngusCanine on March 01, 2014, 09:05:14 PM

Quote from: freddyfarnsworth on March 01, 2014, 09:03:18 PM

In windows yes.

not working just closes immediately

ok I tried with your setup says no devices found when miner starts? doesn't recognize the miners

AngusCanine

legendary

Activity: 1414

Merit: 1001

To weird to live To rare to die

Quote from: freddyfarnsworth on March 01, 2014, 09:03:18 PM

In windows yes.

not working just closes immediately

freddyfarnsworth

full member

Activity: 238

Merit: 100

In windows yes.

AngusCanine

legendary

Activity: 1414

Merit: 1001

To weird to live To rare to die

Quote from: freddyfarnsworth on March 01, 2014, 08:59:03 PM

Quote from: AngusCanine on March 01, 2014, 08:50:27 PM

so this is a bat file?

On windows I use the .cmd type files to run in dosbox with string as above.

Bat was old DOS extension, .COM ect windows does better with .cmd

so save this file as .CMD or .cmd

AngusCanine

legendary

Activity: 1414

Merit: 1001

To weird to live To rare to die

ok that worked but it says no devices found press m and + to add, so when I do this what is the enter target value

edit:in regards to the bat file

freddyfarnsworth

full member

Activity: 238

Merit: 100

Quote from: AngusCanine on March 01, 2014, 08:50:27 PM

so this is a bat file?

On windows I use the .cmd type files to run in dosbox with string as above. without the ./

Bat was old DOS extension, .COM ect windows does better with .cmd

bfgminer.exe -o stratum+tcp://mint.bitminter.com:3333 -u freddyfarnsworth_1 -p x -S antminer:all --set-device antminer:clock=x0981
Mine for me too

Topic: OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 25. (Read 1193271 times)