How do I see what address I'm sending from? I know that's a newbish question but it's not obvious.
Do I need to use coincontrol or anything?
Thanks,
Topic: Old thread of Stakecoin - page 40. (Read 79709 times)
Why can not I receive STK stk.suprnova.cc pay?
Hard fork?
What block did you start mining at? Maybe your coins are still immature? Hard fork?
Coin has matured, the pool also has payment records,
But I did not receive a coin purse!
Please handle it, thank you!
How long is the Pow stage estimated to last?
I have just pointed a considerable amount of hashpower to your pools for the cause.
Cheers, to Stake!
I have just pointed a considerable amount of hashpower to your pools for the cause.
Cheers, to Stake!
Why can't withdraw from the CC mine pool to wallet?
?
? To convert Cinni into STK:
If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey (replace with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey (replace with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.
You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey (replace with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey (replace with your address from that list).
If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey (replace with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey (replace with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.
You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey (replace with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey (replace with your address from that list).
Wow . . . odds that I get this right, slim to none. Not looking forward to this process . . .
Okay so I should send all of my cinni to an address with a bunch of xxxxxxxx? I just want to confirm we are not all supposed to have our own unique address.
JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 is a burn address made with https://github.com/casascius/Bitcoin-Address-Utility
is this something that can be done later on or in a month or 6 months time? Is it automatic? Not everyone can easily sweep their Cinni to one address as it too fragmented because they have been keeping your network going for so long which is part of the reason why snapshot idea was better. Are you going to exclude while giving a fat amount of the premine to the rather questionable amounts being claimed those who say they lost on mintpal?
Have you contacted the exchanges to discuss how to handle the switchover with them? do they even know?
Why can not I receive STK stk.suprnova.cc pay?
Hard fork?
What block did you start mining at? Maybe your coins are still immature? Hard fork?
Why can not I receive STK stk.suprnova.cc pay?
Hard fork?
Hard fork?
To convert Cinni into STK:
If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey (replace with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey (replace with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.
You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey (replace with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey (replace with your address from that list).
If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey (replace with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey (replace with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.
You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey (replace with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey (replace with your address from that list).
Wow . . . odds that I get this right, slim to none. Not looking forward to this process . . .
Okay so I should send all of my cinni to an address with a bunch of xxxxxxxx? I just want to confirm we are not all supposed to have our own unique address.
JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 is a burn address made with https://github.com/casascius/Bitcoin-Address-Utility
is this something that can be done later on or in a month or 6 months time? Is it automatic? Not everyone can easily sweep their Cinni to one address as it too fragmented because they have been keeping your network going for so long which is part of the reason why snapshot idea was better. Are you going to exclude while giving a fat amount of the premine to the rather questionable amounts being claimed those who say they lost on mintpal?
Have you contacted the exchanges to discuss how to handle the switchover with them? do they even know?
To convert Cinni into STK:
If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey (replace with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey (replace with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.
You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey (replace with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey (replace with your address from that list).
If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey (replace with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey (replace with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.
You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey (replace with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey (replace with your address from that list).
Wow . . . odds that I get this right, slim to none. Not looking forward to this process . . .
Okay so I should send all of my cinni to an address with a bunch of xxxxxxxx? I just want to confirm we are not all supposed to have our own unique address.
JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 is a burn address made with https://github.com/casascius/Bitcoin-Address-Utility
To convert Cinni into STK:
If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey (replace with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey (replace with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.
You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey (replace with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey (replace with your address from that list).
If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey (replace with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey (replace with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.
You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey (replace with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey (replace with your address from that list).
Wow . . . odds that I get this right, slim to none. Not looking forward to this process . . .
Okay so I should send all of my cinni to an address with a bunch of xxxxxxxx? I just want to confirm we are not all supposed to have our own unique address.
To convert Cinni into STK:
If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey (replace with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey (replace with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.
You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey (replace with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey (replace with your address from that list).
If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey (replace with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey (replace with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.
You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey (replace with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey (replace with your address from that list).
im getting a win32 error (not a valid application) when trying to download wallet.
I see someone else has same issue, glad its not just me.
I see someone else has same issue, glad its not just me.
I had same error on 32 bit but works fine on 64,
Looking forward to the guide on how to convert cinni to stake, I was starting to think that was just some knowledge we were assumed to be born with.
So this coin had to get another developer to help out ... then build the binaries....and you guys are still mining something fro someone who couldn't launch his own coin?
Is there a block explorer so we can see that indeed there are only those coins premined? And why burn after launch? Funny how EmpoEx seems to have endorsed this right off the bat. I mean come on, we can all see that this isnt the old Cinni Dev, this is some new guy, probably bought the account.
If you are mining this.....
Desperate much?
Is there a block explorer so we can see that indeed there are only those coins premined? And why burn after launch? Funny how EmpoEx seems to have endorsed this right off the bat. I mean come on, we can all see that this isnt the old Cinni Dev, this is some new guy, probably bought the account.
If you are mining this.....
Desperate much?
How do I get hold of the burnadress?
I'll make the guide on how to convert Cinni into STK soon.Good!
but what will happen with cinni? are you going to shutt it down?
im getting a win32 error (not a valid application) when trying to download wallet.
I see someone else has same issue, glad its not just me.
I see someone else has same issue, glad its not just me.
How do I get hold of the burnadress?
I'll make the guide on how to convert Cinni into STK soon.
How do I get hold of the burnadress?
i can't run the wallet on my 32 bit machine windows machine. can you help me please?
The reward floating - is established as Block 402-20000 = 32 STK
After search by a pool of the first block value will be automatically counted. Can check!
After search by a pool of the first block value will be automatically counted. Can check!
How is this possible
same hashrate on two pools and different rewards
same hashrate on two pools and different rewards
it's about pool's luck. first pool may be too lucky to find blocks.
don't worry, it's gonna be even when the difficulty re-adjusted.
yeah, you are right. first pool didn't find a block yet.
by the way it was my mistake to write "same" hashrate
Jump to: