Thank goodness for this tread!
had the same problem. (only 3 gpus working)
Burned out wire at the power supply sata connection
Topic: only 3 GPU's detected in Device Manager" (Read 485 times)
Problem solved: looks like i had a wire that powers 3 gpu's was melted down....
I've tested the GPU's with the risers on another working rig.
And all the cards worked fine.
P106-100 CARDS
Already did a DDU. Tried other drivers.
If i'm using other miners like dstm. The miner freezes aswell.
And all the cards worked fine.
P106-100 CARDS
Already did a DDU. Tried other drivers.
If i'm using other miners like dstm. The miner freezes aswell.
first and most important, what gpus are you trying to install on this mb? i have like 30 rigs with this mb and all of em work fine...
Still getting same error.
What Else can i try ?
What Else can i try ?
Have you tried replacing the risers? most possible and least expensive way is to replace those, if still persist, try to clean uninstall and install the drivers then use other miners like Claymore.
Still getting same error.
What Else can i try ?
What Else can i try ?
UPDATE
So i've installed the GPU's 2 by the time on a different WORKING mining rig.
And all the GPU's run normally.
So this is prbably a motherboard issue or a CPU issue ?
So i've installed the GPU's 2 by the time on a different WORKING mining rig.
And all the GPU's run normally.
So this is prbably a motherboard issue or a CPU issue ?
I've enabled 4g decoding in BIOS
I've tried GEN1 - GEN2 - AUTO etc.... In the H11 D3A MOBO manual it says Enable "Gen 2" with latest bios.
I'm using default clocks, MSI AB isn't even installed yet.
I've contacted my supplier of the rigs, and they said
ERROR 15 temperature and fan are ususally caused by a defected riser.
But i've tested each GPU seperately, in different slots.
And i'm getting, error 15 and sometimes its not detected CUDA device. Even tho its listed in Device manager.
So its weird, i would have 6 faulty risers out of 6 gpu's.
So maybe one faulty riser, damaged the others in some way and now they are all damaged i guess....
I've tried GEN1 - GEN2 - AUTO etc.... In the H11 D3A MOBO manual it says Enable "Gen 2" with latest bios.
I'm using default clocks, MSI AB isn't even installed yet.
I've contacted my supplier of the rigs, and they said
ERROR 15 temperature and fan are ususally caused by a defected riser.
But i've tested each GPU seperately, in different slots.
And i'm getting, error 15 and sometimes its not detected CUDA device. Even tho its listed in Device manager.
So its weird, i would have 6 faulty risers out of 6 gpu's.
So maybe one faulty riser, damaged the others in some way and now they are all damaged i guess....
1. check bios, disable IGD onboard
2. enable 4g above, set to gen1
3. Check riser, maybe change riser to other vga working fine
5. Check power
Good luck to you!
2. enable 4g above, set to gen1
3. Check riser, maybe change riser to other vga working fine
5. Check power
Good luck to you!
Based on my experiences, most of GPU not detected problem is related to riser.
I dont know how you guys check which one is the defected riser, for me, I will start mining then monitor which GPU is cooler, then replace its riser, mostly it works well by then.
I dont know how you guys check which one is the defected riser, for me, I will start mining then monitor which GPU is cooler, then replace its riser, mostly it works well by then.
set the bios settings to gen1
gen1 is more stable than gen2
then try to run the gpus in default clock speed
this error happens when there is excessive overclock with the gpus
gen1 is more stable than gen2
then try to run the gpus in default clock speed
this error happens when there is excessive overclock with the gpus
Code:
12:52:54:235 1de8 Check and remove old log files...
12:52:54:254 1de8 args: -epool eu1.ethermine.org:4444 -epsw x -ewal 0x8daa535fc97819f1bf6401008af043d2c8ace2a5
12:52:54:260 1de8
12:52:54:264 1de8 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
12:52:54:268 1de8 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2 º
12:52:54:273 1de8 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
12:52:54:277 1de8
12:52:54:500 1de8 ETH: 3 pools are specified
12:52:54:505 1de8 Main Ethereum pool is eu1.ethermine.org:4444
12:52:54:509 1de8 DCR: 0 pool is specified
12:52:55:951 1de8 OpenCL platform: Intel(R) OpenCL
12:52:55:955 1de8 OpenCL platform: NVIDIA CUDA
12:52:55:959 1de8 AMD OpenCL platform not found
12:52:56:824 1de8 CUDA initializing...
12:52:56:829 1de8 NVIDIA Cards available: 4
12:52:56:833 1de8 CUDA Driver Version/Runtime Version: 9.1/8.0
12:52:56:846 1de8 GPU #0: P106-100, 6071 MB available, 10 compute units, capability: 6.1
12:52:56:853 1de8 GPU #1: P106-100, 6071 MB available, 10 compute units, capability: 6.1
12:52:56:864 1de8 GPU #2: P106-100, 6071 MB available, 10 compute units, capability: 6.1
12:52:56:874 1de8 GPU #3: P106-100, 6071 MB available, 10 compute units, capability: 6.1
12:52:56:879 1de8 Total cards: 4
12:52:59:691 1de8 No AMD cards in the list, ADL library will not be used.
12:52:59:821 1de8 NVML version: 9.388.43
12:53:00:369 1f2c ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.239.100> port 4444
12:53:00:397 1f2c send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x8daa535fc97819f1bf6401008af043d2c8ace2a5", "x"], "id": 2, "method": "eth_submitLogin"}
12:53:00:403 1f2c ETH: Stratum - Connected (eu1.ethermine.org:4444)
12:53:00:420 1f2c got 39 bytes
12:53:00:425 1f2c buf: {"id":2,"jsonrpc":"2.0","result":true}
12:53:00:431 1de8 No pool specified for Decred! Ethereum-only mining mode is enabled
12:53:00:430 1f2c parse packet: 38
12:53:00:442 1f2c ETH: Authorized
12:53:00:446 1f2c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
12:53:00:451 1f2c new buf size: 0
12:53:00:455 1de8 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
12:53:00:460 1de8 ETH: eth-proxy stratum mode
12:53:00:469 1de8 Watchdog enabled
12:53:00:477 1f2c got 248 bytes
12:53:00:477 1de8 Remote management (READ-ONLY MODE) is enabled on port 3333
12:53:00:482 1f2c buf: {"id":3,"jsonrpc":"2.0","result":["0x4839112f7d1ebca13fbc90f1cc70441e1b95d35a818dd27a7827b062d20a9324","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677b"]}
12:53:00:496 1f2c parse packet: 247
12:53:00:511 1f2c ETH: job changed
12:53:00:516 1f2c new buf size: 0
12:53:00:488 1de8
12:53:00:535 1c04 Setting DAG epoch #155...
12:53:02:832 1e2c Setting DAG epoch #155 for GPU2
12:53:02:832 1c04 Setting DAG epoch #155 for GPU0
12:53:02:842 1cac Setting DAG epoch #155 for GPU1
12:53:02:842 1c04 Create GPU buffer for GPU0
12:53:02:837 1e2c Create GPU buffer for GPU2
12:53:02:847 1cac Create GPU buffer for GPU1
12:53:02:863 1de0 Setting DAG epoch #155 for GPU3
12:53:02:879 1de0 Create GPU buffer for GPU3
12:53:05:707 1f2c got 248 bytes
12:53:05:711 1f2c buf: {"id":0,"jsonrpc":"2.0","result":["0xb71a70377acf1007b2fe7561c7767f3b0bc475edb66edc09921c578f221e7ec0","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677c"]}
12:53:05:715 1f2c parse packet: 247
12:53:05:721 1f2c ETH: job changed
12:53:05:725 1f2c new buf size: 0
12:53:05:730 1f2c ETH: 12/05/17-12:53:05 - New job from eu1.ethermine.org:4444
12:53:05:734 1f2c target: 0x0000000112e0be82 (diff: 4000MH), epoch 155(2.21GB)
12:53:05:739 1f2c ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
12:53:05:744 1f2c ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s
12:53:10:527 1f2c ETH: checking pool connection...
12:53:10:531 1f2c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
12:53:10:551 1f2c got 248 bytes
12:53:10:555 1f2c buf: {"id":3,"jsonrpc":"2.0","result":["0xb71a70377acf1007b2fe7561c7767f3b0bc475edb66edc09921c578f221e7ec0","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677c"]}
12:53:10:559 1f2c parse packet: 247
12:53:10:564 1f2c ETH: job is the same
12:53:10:568 1f2c new buf size: 0
12:53:12:036 1cac GPU1 DAG creation time - 8855 ms
12:53:12:042 1de0 GPU3 DAG creation time - 8863 ms
12:53:12:035 1e2c GPU2 DAG creation time - 8851 ms
12:53:12:066 1de0 Setting DAG epoch #155 for GPU3 done
12:53:12:042 1cac Setting DAG epoch #155 for GPU1 done
12:53:12:057 1c04 GPU0 DAG creation time - 8993 ms
12:53:12:066 1e2c Setting DAG epoch #155 for GPU2 done
12:53:12:088 1c04 Setting DAG epoch #155 for GPU0 done
12:53:12:554 1f2c got 248 bytes
12:53:12:558 1f2c buf: {"id":0,"jsonrpc":"2.0","result":["0xaec53ead85885c1b966edb07f75319dc58e026b8a13beef72cf62c1989122aaf","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677d"]}
12:53:12:562 1f2c parse packet: 247
12:53:12:567 1f2c ETH: job changed
12:53:12:571 1f2c new buf size: 0
12:53:12:576 1f2c ETH: 12/05/17-12:53:12 - New job from eu1.ethermine.org:4444
12:53:12:581 1f2c target: 0x0000000112e0be82 (diff: 4000MH), epoch 155(2.21GB)
12:53:12:586 1f2c ETH - Total Speed: 83.925 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
12:53:12:592 1f2c ETH: GPU0 20.983 Mh/s, GPU1 20.986 Mh/s, GPU2 20.969 Mh/s, GPU3 20.987 Mh/s
12:53:16:387 1f2c got 248 bytes
12:53:16:391 1f2c buf: {"id":0,"jsonrpc":"2.0","result":["0xb4e920856d47c6c7c84bbf733188db79b12f088b12d784c35ad271966ab23cc2","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677d"]}
12:53:16:395 1f2c parse packet: 247
12:53:16:400 1f2c ETH: job changed
12:53:16:404 1f2c new buf size: 0
12:53:16:408 1f2c ETH: 12/05/17-12:53:16 - New job from eu1.ethermine.org:4444
12:53:16:414 1f2c target: 0x0000000112e0be82 (diff: 4000MH), epoch 155(2.21GB)
12:53:16:420 1f2c ETH - Total Speed: 83.907 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
12:53:16:425 1f2c ETH: GPU0 20.983 Mh/s, GPU1 20.976 Mh/s, GPU2 20.973 Mh/s, GPU3 20.975 Mh/s
12:53:20:527 1f2c send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x4ff2499", "0x00000000000000000000000000000000000000000000000000000000e9c85e62"]}
12:53:20:541 1f2c ETH: checking pool connection...
12:53:20:545 1f2c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
12:53:20:551 1f2c got 39 bytes
12:53:20:555 1f2c buf: {"id":6,"jsonrpc":"2.0","result":true}
12:53:20:559 1f2c parse packet: 38
12:53:20:564 1f2c new buf size: 0
12:53:20:570 1f2c got 248 bytes
12:53:20:574 1f2c buf: {"id":3,"jsonrpc":"2.0","result":["0xb4e920856d47c6c7c84bbf733188db79b12f088b12d784c35ad271966ab23cc2","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677d"]}
12:53:20:579 1f2c parse packet: 247
12:53:20:583 1f2c ETH: job is the same
12:53:20:587 1f2c new buf size: 0
12:53:24:534 11d0 GPU0 t=44C fan=48%, GPU1 t=45C fan=48%, GPU2 t=42C fan=48%, GPU3 t=45C fan=48%
12:53:24:609 11cc em hbt: 0, fm hbt: 94,
12:53:24:613 11cc watchdog - thread 0 (gpu0), hb time 125
12:53:24:617 11cc watchdog - thread 1 (gpu0), hb time 0
12:53:24:622 11cc watchdog - thread 2 (gpu1), hb time 171
12:53:24:626 11cc watchdog - thread 3 (gpu1), hb time 46
12:53:24:630 11cc watchdog - thread 4 (gpu2), hb time 15
12:53:24:635 11cc watchdog - thread 5 (gpu2), hb time 140
12:53:24:639 11cc watchdog - thread 6 (gpu3), hb time 187
12:53:24:643 11cc watchdog - thread 7 (gpu3), hb time 62
12:53:28:896 11d0 NVML: cannot get current temperature, error 15
12:53:28:906 11d0 NVML: cannot get fan speed, error 15
12:53:28:914 11d0 NVML: cannot get current temperature, error 15
12:53:28:919 11d0 NVML: cannot get fan speed, error 15
12:53:28:925 11d0 NVML: cannot get current temperature, error 15
12:53:28:930 11d0 NVML: cannot get fan speed, error 15
12:53:30:557 1f2c ETH: checking pool connection...
12:53:30:561 1f2c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
12:53:30:581 1f2c got 248 bytes
12:53:30:585 1f2c buf: {"id":3,"jsonrpc":"2.0","result":["0xb4e920856d47c6c7c84bbf733188db79b12f088b12d784c35ad271966ab23cc2","0x1e9891b51a83da3e735c71999400fc8927e8614e86fc37e618d3781578d5c939","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x47677d"]}
12:53:30:590 1f2c parse packet: 247
12:53:30:594 1f2c ETH: job is the same
12:53:30:598 1f2c new buf size: 0
12:53:31:936 11d0 NVML: cannot get current temperature, error 15
12:53:31:942 11d0 NVML: cannot get fan speed, error 15
12:53:31:947 11d0 NVML: cannot get current temperature, error 15
12:53:31:952 11d0 NVML: cannot get fan speed, error 15
12:53:31:958 11d0 NVML: cannot get current temperature, error 15
12:53:31:964 11d0 NVML: cannot get fan speed, error 15
12:53:34:971 11d0 NVML: cannot get current temperature, error 15
12:53:34:978 11d0 NVML: cannot get fan speed, error 15
12:53:34:985 11d0 NVML: cannot get current temperature, error 15
12:53:34:991 11d0 NVML: cannot get fan speed, error 15
12:53:34:996 11d0 NVML: cannot get current temperature, error 15
12:53:35:002 11d0 NVML: cannot get fan speed, error 15
12:53:35:484 1b68 NVML: cannot get current temperature, error 15
12:53:35:489 1b68 NVML: cannot get fan speed, error 15
12:53:35:493 1b68 NVML: cannot get current temperature, error 15
12:53:35:498 1b68 NVML: cannot get fan speed, error 15
12:53:35:503 1b68 NVML: cannot get current temperature, error 15
12:53:35:507 1b68 NVML: cannot get fan speed, error 15
Bios GEN is set to GEN2
I managed to run 3 GPU's, in slot GPU0 1 AND 2.
Whenever i attach another GPU, i'm getting ERROR 15, temperature and fan errors. And the fans start going at 100%
I've tried another PCI slot and same thing happened.
I managed to run 3 GPU's, in slot GPU0 1 AND 2.
Whenever i attach another GPU, i'm getting ERROR 15, temperature and fan errors. And the fans start going at 100%
I've tried another PCI slot and same thing happened.
maybe it is faulty riser, or a faulty PCE-E slot
try to figure that out which one is bad
also shut down in bios all unused ports and set pci-e options to gen1 or gen2
try to figure that out which one is bad
also shut down in bios all unused ports and set pci-e options to gen1 or gen2
So i added one GPU at a time, and everything worked till i got to GPU4
Got blue screened again, and the second time i tried claymore. Computer just shut down rapidly. And restarted.
Any advice guys ? Could this be a faulty riser ?
Got blue screened again, and the second time i tried claymore. Computer just shut down rapidly. And restarted.
Any advice guys ? Could this be a faulty riser ?
I swapped out some usb's and, and changed some between them.
Now OS is recognizing all six.
But i'm getting Temperature and fan errors
23:40:27:679 1ff4 NVML: cannot get fan speed, error 15
23:40:27:679 1ff4 NVML: cannot get current temperature, error 15
23:40:27:679 1ff4 NVML: cannot get fan speed, error 15
23:40:27:694 1ff4 NVML: cannot get current temperature, error 15
23:40:27:694 1ff4 NVML: cannot get fan speed, error 15
I'm getting blue screened aswell. 10 seconds after starting miner. Thread exception not handled
When i try to use dstm miner (equihash) my computer just quits and restart.
Now OS is recognizing all six.
But i'm getting Temperature and fan errors
23:40:27:679 1ff4 NVML: cannot get fan speed, error 15
23:40:27:679 1ff4 NVML: cannot get current temperature, error 15
23:40:27:679 1ff4 NVML: cannot get fan speed, error 15
23:40:27:694 1ff4 NVML: cannot get current temperature, error 15
23:40:27:694 1ff4 NVML: cannot get fan speed, error 15
I'm getting blue screened aswell. 10 seconds after starting miner. Thread exception not handled
When i try to use dstm miner (equihash) my computer just quits and restart.
Tried that already, GPU's are showned in hidden devices tho in device manager.
I'm getting only 2 gpu's detected now, so i'm starting to think this is a hardware error probably?
Bad riser of USB cable ?
I'm getting only 2 gpu's detected now, so i'm starting to think this is a hardware error probably?
Bad riser of USB cable ?
Hi did you test each card out individually. How about the risers.
Tried that already, GPU's are showned in hidden devices tho in device manager.
I'm getting only 2 gpu's detected now, so i'm starting to think this is a hardware error probably?
Bad riser of USB cable ?
I'm getting only 2 gpu's detected now, so i'm starting to think this is a hardware error probably?
Bad riser of USB cable ?
Add one at a time and restart after each one. Give it time to load all systems before shutting down each time. Make sure you have the latest drivers too.
I've managed to get 5 detected at the moment.
Jump to: