I spaced out the blades today, I'll mess with the power for the fans later.
https://lh6.googleusercontent.com/-K0ed8PEIeDs/Uq8is5RHSLI/AAAAAAAAQeo/JJnvmSv-wno/s0/IMG_0814.JPG
Topic: Open-air cases for ASICMiner backplane and blades (Read 5231 times)
It is sad I only have 4 blades right now, you can send me a few, lol
Ive only 3 :-( 4th is en route and hopefully not lost in the holiday shipping rampage.
Just when I had resource's lined up for 2 more, jealous car went "cough cough".
Got the fans on ebay http://www.ebay.com/itm/270964546597?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I was originally going to use the terminals by the power supply but had a change of heart when putting it together. The fans all together are right at 1 amp, I will probably move it to the terminals later once I get some more heat shrink tubing.
The spacing works out perfectly keeping them cool, if I don't get more blades next month I'll space them out some.
It is sad I only have 4 blades right now, you can send me a few, lol
I noticed the blade being tilted a little after I took the picture, it has been fixed.
I have to say, I love this case, all 6 fans running is nice and quiet, no more box fan keeping them cool.
I was originally going to use the terminals by the power supply but had a change of heart when putting it together. The fans all together are right at 1 amp, I will probably move it to the terminals later once I get some more heat shrink tubing.
The spacing works out perfectly keeping them cool, if I don't get more blades next month I'll space them out some.
It is sad I only have 4 blades right now, you can send me a few, lol
I noticed the blade being tilted a little after I took the picture, it has been fixed.
I have to say, I love this case, all 6 fans running is nice and quiet, no more box fan keeping them cool.
Add me to q also.
I PM'ed you before and after the thread opened. Am I an the order queue?
Thanks
Thanks
Yep.
Thanks, Let me know when I'm up.
I PM'ed you before and after the thread opened. Am I an the order queue?
Thanks
Thanks
Yep.
I PM'ed you before and after the thread opened. Am I an the order queue?
Thanks
Thanks
Got mine in yesterday and it looks great. With the fans in a push pool configuration, I can actually touch the asic chip's now.
I would space the blades apart till you get more blades.
What fans were those? Link please.
I myself had planned on using the screw terminals by the PS connection to feed fans.
Hmm, I wondered if you could plug fans into the asicminer blade raw terminals. I guess you can. It's unfortunate that you only have 4 blades though. Seems like a waste of an open air case :/
Got mine in yesterday and it looks great. With the fans in a push pool configuration, I can actually touch the asic chip's now.
https://lh6.googleusercontent.com/-zDmZjcoaD6M/Uqksh1ABpgI/AAAAAAAAQbo/7eTXjEENu9o/s0/IMG_0788.JPG
https://lh6.googleusercontent.com/-mSt9vqWwFZM/UqkshpZiaKI/AAAAAAAAQbs/KqNxtvX6vhQ/s0/IMG_0789.JPG
https://lh4.googleusercontent.com/-bbpbTmHUiyc/UqnkBSsJRLI/AAAAAAAAQdM/bYrgkJjej8g/s0/IMG_0800.JPG
https://lh5.googleusercontent.com/-8n6uqptnDzc/UqnkB9xwfbI/AAAAAAAAQdI/UwpR0GKp7Mg/s0/IMG_0801.JPG
https://lh4.googleusercontent.com/-z7aURjWQRJs/UqnkBjy4U8I/AAAAAAAAQdE/yOnRVT245a8/s0/IMG_0802.JPG
https://lh6.googleusercontent.com/-ieoMiA-tNtY/UqnkDXX36DI/AAAAAAAAQdY/d6AbFrvQ4dc/s0/IMG_0803.JPG
https://lh3.googleusercontent.com/-A4Tu-fY-JHE/UqnkErTzvFI/AAAAAAAAQdg/YG-7GB-a7eI/s0/IMG_0804.JPG
https://lh5.googleusercontent.com/-wMd8Tp9GXLM/UqnkFH5bkWI/AAAAAAAAQdo/gTxmZLPjLBA/s0/IMG_0805.JPG
https://lh5.googleusercontent.com/-zdce51PTt0Q/UqnkFgqN0JI/AAAAAAAAQds/X8cEcnGkRZ0/s0/IMG_0806.JPG
https://lh5.googleusercontent.com/-KF90sYIdSkQ/UqnkGmA5IYI/AAAAAAAAQdw/-kjTQVsW-Yc/s0/IMG_0807.JPG
https://lh6.googleusercontent.com/-zDmZjcoaD6M/Uqksh1ABpgI/AAAAAAAAQbo/7eTXjEENu9o/s0/IMG_0788.JPG
https://lh6.googleusercontent.com/-mSt9vqWwFZM/UqkshpZiaKI/AAAAAAAAQbs/KqNxtvX6vhQ/s0/IMG_0789.JPG
https://lh4.googleusercontent.com/-bbpbTmHUiyc/UqnkBSsJRLI/AAAAAAAAQdM/bYrgkJjej8g/s0/IMG_0800.JPG
https://lh5.googleusercontent.com/-8n6uqptnDzc/UqnkB9xwfbI/AAAAAAAAQdI/UwpR0GKp7Mg/s0/IMG_0801.JPG
https://lh4.googleusercontent.com/-z7aURjWQRJs/UqnkBjy4U8I/AAAAAAAAQdE/yOnRVT245a8/s0/IMG_0802.JPG
https://lh6.googleusercontent.com/-ieoMiA-tNtY/UqnkDXX36DI/AAAAAAAAQdY/d6AbFrvQ4dc/s0/IMG_0803.JPG
https://lh3.googleusercontent.com/-A4Tu-fY-JHE/UqnkErTzvFI/AAAAAAAAQdg/YG-7GB-a7eI/s0/IMG_0804.JPG
https://lh5.googleusercontent.com/-wMd8Tp9GXLM/UqnkFH5bkWI/AAAAAAAAQdo/gTxmZLPjLBA/s0/IMG_0805.JPG
https://lh5.googleusercontent.com/-zdce51PTt0Q/UqnkFgqN0JI/AAAAAAAAQds/X8cEcnGkRZ0/s0/IMG_0806.JPG
https://lh5.googleusercontent.com/-KF90sYIdSkQ/UqnkGmA5IYI/AAAAAAAAQdw/-kjTQVsW-Yc/s0/IMG_0807.JPG
I'd rather pay fiat. I don't want to be the guy that paid thousands of BTC for a pizza then a couple years later missed out on being a millionaire.
What's the turnaround time on these? And I second the "why not take BTC" question. 
Why are you not accepting BTC for these? 
Im in for one.
sending pm
sending pm
add me to queue please. thanks.
What all is included as far as mounting the board to the case and the blades to the tabs?
Michael
Michael
All fasteners are included i.e. standoffs, bolts, nuts, etc.
Cool, I sent you an email. Just forgot to ask about that. Regards to my email, I only need the blade tabs for one side. My blade only has a hole on one side for mounting. Guess they wanted to save that extra .50
looks damn nice !
Sent PM and email
Thanks
Thanks
What all is included as far as mounting the board to the case and the blades to the tabs?
Michael
Michael
All fasteners are included i.e. standoffs, bolts, nuts, etc.
What all is included as far as mounting the board to the case and the blades to the tabs?
Michael
Michael
Jump to: