hello demonmaestro, hope you don't mind, but this is important to ALL miners....please sign this petition to change the IRS ruling, thanks sbfree.
https://petitions.whitehouse.gov/petition/amend-irs-notice-2014-2taxing-virtual-currencybitcoin-property-stifles-new-technologycreates/z7WtKZGY
Topic: [Open - Group Buy]Dualminer USB ASIC scrypt miner $45 [USA Only][Batch #4] (Read 34158 times)
March 28, 2014, 11:37:54 PM
March 24, 2014, 04:35:25 PM
price updated. BTC0.095 a piece
at current rates, that's a little steep, don't you think?
March 24, 2014, 04:14:35 PM
price updated. BTC0.095 a piece
at current rates, that's a little steep, don't you think?
well at last rate i had seed was $550 a coin...
so at $52.25 a piece that was with shipping aint too bad.
But just for you i edited it.
BTC0.09 each
March 24, 2014, 04:10:51 PM
price updated. BTC0.095 a piece
at current rates, that's a little steep, don't you think?
March 24, 2014, 09:19:11 AM
No interest for this group buy? I wish these were lower in price from the manufacturer, like $40-$50 range. Slightly hard to justify the $60+ price tag.
BUT, I will still buy a few more if this group buy comes close.
BUT, I will still buy a few more if this group buy comes close.
You got your wish!
March 23, 2014, 11:43:15 PM
price updated. BTC0.095 a piece
March 23, 2014, 11:38:52 PM
No interest for this group buy? I wish these were lower in price from the manufacturer, like $40-$50 range. Slightly hard to justify the $60+ price tag.
BUT, I will still buy a few more if this group buy comes close.
BUT, I will still buy a few more if this group buy comes close.
Um dualminers for $44.99!!!
No joke. March madness promotion.
https://bitcointalksearch.org/topic/march-madness-sale-dualminer-usb-2-528290
At this price I'd get like 20-30
March 22, 2014, 09:37:46 PM
No interest for this group buy? I wish these were lower in price from the manufacturer, like $40-$50 range. Slightly hard to justify the $60+ price tag.
BUT, I will still buy a few more if this group buy comes close.
BUT, I will still buy a few more if this group buy comes close.
March 21, 2014, 01:26:28 PM
Now it seems up to 6, but haven't seen it go any higher. Dualminer support simply said "put a fan on them".
I am using DM GUI. Not using a pll as I am using cleverming and they indicate my param has to be set for "--scrypt" can I do both? I have the 2nd Gen DM, so toggle switch is a non-issue. Yes, LTC mode only is checked.
Thanks for the response!
Anyone has link to how to do that?
And, does it help with the hashrate to have one less window open?
with or without fan, stex?
I'm on the recommended orico 10 port usb2.0 hubX10.
they are in my basement, so it's kind of hot. as i am in socal.
March 21, 2014, 12:56:59 PM
Now it seems up to 6, but haven't seen it go any higher. Dualminer support simply said "put a fan on them".
I am using DM GUI. Not using a pll as I am using cleverming and they indicate my param has to be set for "--scrypt" can I do both? I have the 2nd Gen DM, so toggle switch is a non-issue. Yes, LTC mode only is checked.
Thanks for the response!
Anyone has link to how to do that?
And, does it help with the hashrate to have one less window open?
with or without fan, stex?
I'm on the recommended orico 10 port usb2.0 hubX10.
March 21, 2014, 12:50:52 PM
Now it seems up to 6, but haven't seen it go any higher. Dualminer support simply said "put a fan on them".
I am using DM GUI. Not using a pll as I am using cleverming and they indicate my param has to be set for "--scrypt" can I do both? I have the 2nd Gen DM, so toggle switch is a non-issue. Yes, LTC mode only is checked.
Thanks for the response!
Anyone has link to how to do that?
And, does it help with the hashrate to have one less window open?
March 21, 2014, 12:43:55 PM
For the life of me I can't seem to get these things to work on the cgminer GUI.
I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
Why not use dualminer GUI?I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
Thanks. Ended up that the usbs just weren't getting recognized at first.
hmmm I can only seem to get 3 of these things hashing at a time for any period of time on orico 10 port USB.
anyone know of a good help thread?
just the main thread under custom hardware
are you using the DM GUI? what PLL are you using? Toggle switch is on L right? and LTC mode only is checked?
Now it seems up to 6, but haven't seen it go any higher. Dualminer support simply said "put a fan on them".
I am using DM GUI. Not using a pll as I am using cleverming and they indicate my param has to be set for "--scrypt" can I do both? I have the 2nd Gen DM, so toggle switch is a non-issue. Yes, LTC mode only is checked.
Thanks for the response!
March 21, 2014, 12:39:51 PM
For the life of me I can't seem to get these things to work on the cgminer GUI.
I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
Why not use dualminer GUI?I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
Thanks. Ended up that the usbs just weren't getting recognized at first.
hmmm I can only seem to get 3 of these things hashing at a time for any period of time on orico 10 port USB.
anyone know of a good help thread?
just the main thread under custom hardware
are you using the DM GUI? what PLL are you using? Toggle switch is on L right? and LTC mode only is checked?
March 21, 2014, 08:07:59 AM
For the life of me I can't seem to get these things to work on the cgminer GUI.
I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
Why not use dualminer GUI?I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
Thanks. Ended up that the usbs just weren't getting recognized at first.
hmmm I can only seem to get 3 of these things hashing at a time for any period of time on orico 10 port USB.
anyone know of a good help thread?
March 20, 2014, 11:50:52 PM
For the life of me I can't seem to get these things to work on the cgminer GUI.
I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
Why not use dualminer GUI?I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
Thanks. Ended up that the usbs just weren't getting recognized at first.
March 20, 2014, 11:41:28 PM
For the life of me I can't seem to get these things to work on the cgminer GUI.
I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
Why not use dualminer GUI? I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
March 20, 2014, 09:46:12 PM
For the life of me I can't seem to get these things to work on the cgminer GUI.
I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
I am using clevermining and it won't even start. No output nothing.
I followed all the steps but no dice.
Any help is very appreciated.
March 20, 2014, 01:20:48 PM
looks like they've adjusted their pricing
March 18, 2014, 03:19:48 PM
Any idea when GB 4 is expected to be shipped out if purchased today? Thanks
Once the Group buy is fully funded March 18, 2014, 03:04:56 PM
Any idea when GB 4 is expected to be shipped out if purchased today? Thanks
Jump to: