Topic: Open Source XPM Pool + GPU Miner (aka. madPrimeMiner) - page 6. (Read 63469 times)

Try download miner again.
Overclocking and temperature control not working on Windows properly now, but mining must work.

Only with 7.1? I don't touch a client, only OpenCL kernel was changed (you can try v7.0 with kernel.bin from 7.1).
Are ports 60000-60003 opened at your network?

having issues with v7.1 - seems to just hang on the connecting to pool part.  Tried it on a couple machines and it does the same on all of them. All running windows 8.1 and have 6 x R9 280X.  Anyone else experiencing the same issues?

My R9 280 eror!


--------------------------------------------------------------------------------------------------------
Found 2 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
N=12 SIZE=4096 STRIPES=840 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 0: has 32 CUs
GPU 0: primorial = 13082761331670030 (54 bits)
GPU 0: sieve size = 110100480 (27 bits)
GPU 0: max bits used 357/384
N=12 SIZE=4096 STRIPES=840 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 1: has 32 CUs
GPU 1: primorial = 13082761331670030 (54 bits)
GPU 1: sieve size = 110100480 (27 bits)
GPU 1: max bits used 357/384
prepare_adl success
GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_6798&SUBSYS_3001174B&REV_00_4&1B8
9D1F&0&00E0A iBusNumber 2 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAd
apterName  AMD Radeon R9 200 Series
Failed to ADL_Adapter_ID_Get. Error -5Failed to ADL_Adapter_ID_Get. Error -5Fail
ed to ADL_Adapter_ID_Get. Error -5Failed to ADL_Adapter_ID_Get. Error -5Failed t
o ADL_Adapter_ID_Get. Error -5Failed to ADL_Adapter_ID_Get. Error -5Failed to AD
L_Adapter_ID_Get. Error -5ADL found less devices than opencl!There is possibly m
ore than one display attached to a GPUUse the gpu map feature to reliably map Op
enCL to ADLWARNING: Number of OpenCL and ADL devices did not match!Hardware moni
toring may NOT match up with devices!GPU 0 AMD Radeon R9 200 Series hardware mon
itoring enabled
Set fanspeed not supported
set_fanspeed(1, 70) failed.
Connecting to frontend: 89.179.126.88:6666 ...
Connecting to bitcoin: 89.179.126.88:60002 ...
Connecting to signals: 89.179.126.88:60003 ...
Work received: height=631593 diff=10.962315 latency=204ms
 * warning: no enough candidates available
 * warning: no enough candidates available
 * warning: no enough candidates available
 * warning: no enough candidates available
error: mpz_divisible_ui_p failed.

I don't finished work on source, it will be released tomorrow (14Jul) 99%

A little update now, version 7.1: https://www.dropbox.com/s/029gt5jk4tt8a2y/xpmclient_v7_1.tar.gz

~13,45CPD on stock Sapphire Tri-X Radeon R9 290X.

i think he can release source code when next  binary released, therefore to avoid someone use  his  code  for himself's paid miner, which is not good.  quote author=primer10 link=topic=602292.msg7790612#msg7790612 date=1405095507]
Well done eXtremal! Can't wait for the source
[/quote]

Well done eXtremal! Can't wait for the source

pm me i can give you a multirig for testing if you have teamviewer its windows 7 also ill put 2x 290x on it if you like

hashprimorial now not used and will be removed from config.txt, you can change sieveprimorial with range 13-15 for R9 270/280.

Ok, I try fix it, but I have no access to multi-gpu windows machine for testing..

In latest version hash primorial not used.

After next update R9 290X will show over 13CPD

try 2 or 3 for hashprimorial cpd is 5.xx for 270x

ADL only recognition the first card in win7, please fix it, thanks for your work.
linux work well


[GPU 0] T=77C A=98% E=0 primes=0.105508 fermat=576426/sec cpd=8.51/day
[GPU 1] T=-1C A=-1% E=0 primes=0.105716 fermat=573558/sec cpd=8.64/day
[GPU 2] T=-1C A=-1% E=0 primes=0.106862 fermat=566284/sec cpd=9.50/day
[GPU 3] T=-1C A=-1% E=0 primes=0.106452 fermat=607183/sec cpd=9.80/day

Wow you did it, wonderful! I have tested it briefly, on Linux

• 280X's cpd is 9.xx !! I think this miner becomes fastest again!!
• for 270, however, cpd is much lower than v6 (3.5 for v6, 2.7 for v7). (I have tried both 5 and 6 for hashprimorial.)
• I've got 2 warning messages per card after each new work received

For the fan speed, does it mean a fixed fan speed or max fan speed for auto?

Opensource miner comeback: https://www.dropbox.com/s/zdq674972kpllup/xpmclient_v7.tar.gz

It's single Sapphire Tri-X Radeon R9 290X stock on DTC pool, 12,7CPD.

Archive contains binaries for Linux x86-64 and Windows (sources not ready for release now, after 2-3 days I share updated source code in separate git repository) and config.txt templates for currently working XPM and DTC pools.
Linux version has problems with overclocking, 12CPD is limit for R9 290X now in Linux.

What do I do with the "gpu" folder?  So far I just placed it in the same folder with the xpmclient.exe.  

Also, when I try to run it I get an error:


edit:  ahh... latest drivers... Yeah, I'm running 13.12 for another miner right now.  Oh well.  I'll come back to this in a week or so.  I think claymore is still faster for now.  Good luck

Okay, cool. Think I'm getting the hang of mingw now too.  Thanks for the help.

from the first post - these are for the solo server:

grendel25
https://bitcointalksearch.org/topic/ann-new-primecoin-pool-gpu-miner-598542 - see first post. Download miner for your OS and latest patch, replace kernel.bin file and pool address in config.txt... Also you can use solo miner.

Can you please provide a link to this windows miner that is ready to use?  All I see is the link on the front that is to the github source.  Sorry, I must be blind.

Edit: also, I think the issue may also be with the sense that I want to modify the source to try out solo server: https://bitcointalksearch.org/topic/m.6733542 

Latest update: https://www.dropbox.com/s/ujfsc7vnwjtbv4a/patch_v6.1.tar.gz

3xRadeon R9 290X 1040/1250MHz

If you use Windows, why you want to compile miner yourself to use it, when its ready to use already (if not for sport)?
You just set config file, click on .exe file and its all :-)

I'm on windows and it's not so much that I can't open programs it's more that I don't know which specific files to open or other specifics of how to make it work.