Pages:
Author

Topic: other uses for ASIC hardware? (Read 2502 times)

legendary
Activity: 1456
Merit: 1000
July 13, 2016, 09:27:14 PM
#24
ASIC = 1 application.  They do nothing but hash the SHA256 function.
and you can use it for a space heater


Pretty loud space heater:)

Most all the asic's I have reviewed I had in my room during initial testing.  Once I got a mining area it changed as I have 240 there and only 120 in my room.  But I did use many as space heater's.  

That being said it is so much nicer to have them all in one place in my mining area.  Not juggling so many on each circuit being safe.  And putting them in mining area I got rid of noise around house.     So you definitely can use them as space heater's I have but once you get into some of the big miner's it's nice not to.  

Also if you have someone over who is not familiar with bitcoin's it's nice not to have them see these asics all over.  For example when I had fiber installed was not so fun moving miner's or hiding them for a few hour install.   Also a electrician seeing my miner's was the cause of the most outrageous electrical quote I ever got, just as he saw these machines that seemed weird to him.
newbie
Activity: 37
Merit: 0
July 13, 2016, 12:03:22 PM
#23
ASIC = 1 application.  They do nothing but hash the SHA256 function.
and you can use it for a space heater


Pretty loud space heater:)
sr. member
Activity: 427
Merit: 250
July 13, 2016, 11:02:10 AM
#22
ASIC = 1 application.  They do nothing but hash the SHA256 function.
and you can use it for a space heater
legendary
Activity: 2408
Merit: 1102
Leading Crypto Sports Betting & Casino Platform
July 13, 2016, 10:44:05 AM
#21
did anyone mention doorstop ?
member
Activity: 61
Merit: 10
July 12, 2016, 09:32:06 AM
#20
what other coin (sha256) are you mining with your asics? are s7s now more profitable mining something other than bitcoin?
legendary
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
July 11, 2016, 10:29:36 PM
#19
ASIC = 1 application.  They do nothing but hash the SHA256 function.
legendary
Activity: 3808
Merit: 1723
July 11, 2016, 10:15:39 PM
#18
I looked at the Antminer S2 Controller. It comes with a Beaglebone Black and an Cyclone IV FPGA.

Anyway to mine Qubit/Quark/X11 with that FGPA? You can probably reprogram it to hash any algo.


legendary
Activity: 2450
Merit: 1002
July 11, 2016, 09:44:53 PM
#17
They make fun shooting targets =)
legendary
Activity: 1456
Merit: 1000
July 11, 2016, 07:25:12 PM
#16
My best guess is to take them to the asic museum [somewhere upstrairs where it will bite dust] or the ebay graveyard.
I picked the museum and once in a wile i will check if they are still alive and put them back again.

I would go the ebay route personally, I sell almost all of my old gear before it get's that dated.  With paying electricity there is a point I can sell gear to "free electricity" or cheap electricity users.  It just makes sense doing this then having them sitting there collecting dust.  I sold my last S7 the other day.    And I will take that twords new gear, or buy BTC.

Only one's I wish I would have kept was a few of my asic miner USB sticks from long long ago.  But I guess I could rebuy if I really wanted today for less then I sold them.   I had around 80 I believe at highest point. But I don't regret selling my miner's on to new owners really has helped ROI by doing it with every big minesr.
hero member
Activity: 1568
Merit: 544
July 11, 2016, 04:59:31 PM
#15
My best guess is to take them to the asic museum [somewhere upstrairs where it will bite dust] or the ebay graveyard.
I picked the museum and once in a wile i will check if they are still alive and put them back again.
legendary
Activity: 3808
Merit: 1723
July 10, 2016, 12:43:19 PM
#14
Basically its reaching the point where you need to pay people to take your miners.

I can't even throw them away because in my area electronics/computer equipment need to be recycled, so I need to drive to an recycling station. The garbage men won't take this equipment.

legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
July 09, 2016, 02:50:50 PM
#13
Can we resell those BeaconBone/Rasberry Pi found on the Antminer S1,S2,S3 & KNC Jupiter controllers?

Maybe they might get like $20 on eBay or something

its the older-gen Pi tho, so dont expect much when the Rpi3 is only $40. maybe $10-15 if you're lucky. but its great to convert to a node or some other micro-pc application. In fact, some units sold them with minimalistic controllers that lack ports and some features like audio/hdmi/etc and may have virtually no resale value as it would require being controlled almost entirely by ethernet/ssh
member
Activity: 124
Merit: 15
July 09, 2016, 02:41:26 PM
#12
What about the fans on the S3's, would they make good computer case fans?  Would they plug up nice on motherboards pvm, or are they too power hungry and fry a board?

S1 and S5 might be reusable if someone (cough makes a new hashboard to fit on that chassis.

Right now that's the only reason I'm hanging on to them.

I don't have the heart to scrap em down, nor do I have a desire to pawn off on a doe eyed newbie.  Thus, I too will keep obsolete units intact in hope for future updates, but in the mean time since they are just taking up space, I see the fans as only reusable parts, and have a need for better tower fans. 
legendary
Activity: 3808
Merit: 1723
July 09, 2016, 03:24:00 AM
#11
Can we resell those BeaconBone/Rasberry Pi found on the Antminer S1,S2,S3 & KNC Jupiter controllers?

Maybe they might get like $20 on eBay or something
legendary
Activity: 1456
Merit: 1000
July 09, 2016, 02:58:30 AM
#10
I've got probably 40 bare chassis around the shop as well for mostly the same reason. Gimme a few months and hopefully I'll have something good for you.


Very interesting any chassis specifically?  There just is a lot of variance between some.  But I look forward to seeing what you have coming up.

One I have wondered about is all the A1 (Dragon's).  There are a LOT of them out there and after having I would think  lot will be offline gathering dust.  There is the controller, and the PSU that easily reusable.   But heatsinks, pcb's, chips, etc are really not worth much.  So a lot of useless parts that I'm curious what the bigger mines that had them will do with them.  Sit in corner? Scrap metal?     Due to power efficiency I had to get rid of mine quiet a while ago.
legendary
Activity: 910
Merit: 1000
July 08, 2016, 11:20:22 AM
#9
As I'm sure is the case for many other people, I have a ton of hardware laying around that isn't profitable for bitcoin mining at the moment. Is there something more useful to do with my S1, S5, S7 that's taking up space other than a once expensive paperweight?

Is anyone having good experiences with multiminers that just throw hash power at altcoins?

I've got a few scrypt miners that I use to convert various alt to BTC regularly but my ASICs are much more high powered and efficient, is there something else to be done with them?
The asic hardware is just for mining one algoritm and it is just for one algoritm of coin and you can use it for mining coins who has same algoritm. That is why we must calculate roi of Investment before we buy some miners hardware.
hero member
Activity: 1063
Merit: 502
RIP: S5, A faithful device long time
July 08, 2016, 11:09:01 AM
#8
As I'm sure is the case for many other people, I have a ton of hardware laying around that isn't profitable for bitcoin mining at the moment. Is there something more useful to do with my S1, S5, S7 that's taking up space other than a once expensive paperweight?

Is anyone having good experiences with multiminers that just throw hash power at altcoins?

I've got a few scrypt miners that I use to convert various alt to BTC regularly but my ASICs are much more high powered and efficient, is there something else to be done with them?

I have Antminer S1, look at halving clock. http://bitcoinclock.com/ Difficulty is too much.
member
Activity: 61
Merit: 10
July 08, 2016, 10:38:42 AM
#7
Looking forward to it, keep up the good work!
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
July 08, 2016, 10:30:37 AM
#6
I've got probably 40 bare chassis around the shop as well for mostly the same reason. Gimme a few months and hopefully I'll have something good for you.
member
Activity: 61
Merit: 10
July 08, 2016, 10:29:03 AM
#5
S1 and S5 might be reusable if someone (cough makes a new hashboard to fit on that chassis.

Right now that's the only reason I'm hanging on to them.
Pages:
Jump to: