Where are your PSU?
Topic: over heat problem - page 2. (Read 1846 times)
90-100c is normal?
I am too scared to run with that lol
please confirm it won't fry
I am too scared to run with that lol
please confirm it won't fry
I don't think they will fry, my passive HD 5750s start to lower they max usage % @ 100-105 °C...
90-100c is normal?
I am too scared to run with that lol
please confirm it won't fry
I am too scared to run with that lol
please confirm it won't fry
Normal 
Some program(ing languge) starts counting at 0, some at 1, that makes the list normal.
That can mean two thing:
According those numbers:
If it's an assign disarrange (no problem at all), GPU1 are the above, GPU2 are the lower, and GPU3 are the middle card.
If it's some difference between cards.... Try to rearrange them, and if you got the same numbers, they the same.
When i run with DEVICE=0 the GPU #1 temp goes up.
When i run with DEVICE=1 the GPU #3 temp goes up.
When i run with DEVICE=2 the GPU #2 temp goes up.
Is this normal?
When i run with DEVICE=1 the GPU #3 temp goes up.
When i run with DEVICE=2 the GPU #2 temp goes up.
Is this normal?
Some program(ing languge) starts counting at 0, some at 1, that makes the list normal.
While mining:
GPU1 temp:93
GPU2 temp:62
GPU3 temp:86
http://i52.tinypic.com/vo23wz.png
Without mining:
GPU1 temp:54
GPU1 temp:43
GPU1 temp:54
http://i55.tinypic.com/ml3x9h.png
GPU1 temp:93
GPU2 temp:62
GPU3 temp:86
http://i52.tinypic.com/vo23wz.png
Without mining:
GPU1 temp:54
GPU1 temp:43
GPU1 temp:54
http://i55.tinypic.com/ml3x9h.png
That can mean two thing:
- The driver don't assign device numbers, as the way they are arranged physically
- Your cards ain't 100% the same
According those numbers:
If it's an assign disarrange (no problem at all), GPU1 are the above, GPU2 are the lower, and GPU3 are the middle card.
If it's some difference between cards.... Try to rearrange them, and if you got the same numbers, they the same.
Two GPU's temp just go 90+ within minutes of mining, and the other one is almost normal.
They are all MSI 6950 Twin Frozr III
I haven't done any overclocking or anything, default win7 i got with the PC.
While mining:
GPU1 temp:93
GPU2 temp:62
GPU3 temp:86
Without mining:
GPU1 temp:54
GPU1 temp:43
GPU1 temp:54
____________________________________
I noticed something while using phoenix mining software.
When i run with DEVICE=0 the GPU #1 temp goes up.
When i run with DEVICE=1 the GPU #3 temp goes up.
When i run with DEVICE=2 the GPU #2 temp goes up.
Is this normal?
<--- knows nothing about hardware.
____________________________________
And here is the setup (which i don't dare to touch)
http://i53.tinypic.com/25uo1s4.jpg
Is it a configuration thing? or this is normal.
And what's the red line the temp shouldn't go over? 100? 70?
Another little question: What do i use to see the temperature of the CPU?
I searched and got a program but it doesn't support my Sempron140.
I know the board has those answers some where but i looked and searched.
thanks
They are all MSI 6950 Twin Frozr III
I haven't done any overclocking or anything, default win7 i got with the PC.
While mining:
GPU1 temp:93
GPU2 temp:62
GPU3 temp:86
Without mining:
GPU1 temp:54
GPU1 temp:43
GPU1 temp:54
____________________________________
I noticed something while using phoenix mining software.
When i run with DEVICE=0 the GPU #1 temp goes up.
When i run with DEVICE=1 the GPU #3 temp goes up.
When i run with DEVICE=2 the GPU #2 temp goes up.
Is this normal?
<--- knows nothing about hardware.
____________________________________
And here is the setup (which i don't dare to touch)
http://i53.tinypic.com/25uo1s4.jpg
Is it a configuration thing? or this is normal.
And what's the red line the temp shouldn't go over? 100? 70?
Another little question: What do i use to see the temperature of the CPU?
I searched and got a program but it doesn't support my Sempron140.
I know the board has those answers some where but i looked and searched.
thanks
Jump to: