Topic: [pandacoin] The Panda Coin ♥ Scrypt Adaptive-N w/Kimotos Gravity Well ★ - page 171. (Read 398951 times)
February 16, 2014, 09:06:29 AM
confirmed! payments are fixed!
February 16, 2014, 09:05:26 AM
in most cases when there are payment issues, people freak out. 99% of the times they are right;
But that doesn't mean the payment issues are as bad as people make out though. It will be fixed very soon according to the Admin on the IRC and since it was temporarily fixed earlier it is probably not too far away.
No coins are lost in this. I'm looking at this right now and payouts should flow with the proper requested values. Give me one moment, I'm working with one person regarding this right now and trying to trace down the issue. I think once his problem is traced down everyone else will be fixed too. Please be patient but understand I'm working on this right now.
Rest assured everything will be fixed, after all, it's dedicatedpool
http://dedicatedpool.com
Ryan, dedicatedpool.com support/admin
[email protected] / IRC on freenode ##dedicatedpool
*** UPDATE ON PAYMENT ISSUES ***
They are now fixed.
The problem was due to us setting the confirms from 120 to 50 last night on block confirms.
The problem is, we use custom code and in the code we hadn't put the 120 down to 50 as well. This means that the payment cron was judging your payouts based on 120 confirms for blocks, so in it's eyes, blocks were still unconfirmed. The website was judging blocks on 50 confirms, so in it's eyes, you had more confirmed coins than the payout cron thought you had.
Now that it's fixed all your coins in your confirmed section are paid out to you. You can go ahead and re-enable auto payments.
Took a bit to track down, but it's fixed now - confirmed by all members.
Thank you for your patience in this matter.
http://dedicatedpool.com
Ryan, dedicatedpool.com support/admin
[email protected] / IRC on freenode ##dedicatedpool
February 16, 2014, 09:04:55 AM
This coins a joke, nothing works and Wolong is a scammer
https://bitcointalksearch.org/topic/the-official-pandacoin-thread-pndscryptkgw0-premine-464476 go here instead, same coin, but the devs seem to be much more honest and reliable, they had a great launch, and they didn't pre-mine anything either. Support these guys people, not Woscam
https://bitcointalksearch.org/topic/the-official-pandacoin-thread-pndscryptkgw0-premine-464476 go here instead, same coin, but the devs seem to be much more honest and reliable, they had a great launch, and they didn't pre-mine anything either. Support these guys people, not Woscam
February 16, 2014, 09:04:13 AM
Ok can anyone be so kind as to explain to me how in the world someone is hitting 137,276 KH/s on this coin. Everyone knows our hash rate is halved... What is going on?
Look at this numbers 31,738 KH/s that is more acceptable but 137,276 KH/s come on now?
I've seen more when miners were mining DOGE. Nothing special or crazy. Look at this numbers 31,738 KH/s that is more acceptable but 137,276 KH/s come on now?
February 16, 2014, 09:02:55 AM
Ok can anyone be so kind as to explain to me how in the world someone is hitting 137,276 KH/s on this coin. Everyone knows our hash rate is halved... What is going on?
Look at this numbers 31,738 KH/s that is more acceptable but 137,276 KH/s come on now?
Look at this numbers 31,738 KH/s that is more acceptable but 137,276 KH/s come on now?
February 16, 2014, 08:57:37 AM
MintPal has completed a full day of PANDA/BTC trading without any interruptions or issues. Furthermore, we have a better UI, lower fees and a faster site, give us a try today.
https://www.mintpal.com/market/PANDA/BTC
https://www.mintpal.com/market/PANDA/BTC
February 16, 2014, 08:51:49 AM
4.47 Ghs in vertminer = roughly 9Ghs for any scrypt => big big success for a few days old coin.
That's not the current net hashrate. It's ~2.74 GH/s.
Not sure, but ok
I thought that vert miner gives roughly 50% of hash which regular scrypt does.
Client -> Debug -> getmininginfo = approx 4.5gh/s
Which if we double goes to 9gh/s of regular scrypt, right.
February 16, 2014, 08:44:10 AM
280x=375K 270x=240K 等挖矿参数可到群共享参考。
Pandacoin□China□#1 主力群 272998585 Wolong就在这群!
thepandacoin[PANDA]
Wolong(狗庄)心血力作，目前算力已达8G，小平台日交易量400+BTC，火爆bitcointalk论坛，由此出现了5种仿制熊猫币了。。。
2月28日前 在IRC #pandacoin 聊天室聊天，有机会获得5000W PANDA抽奖
Pandacoin□China□#1 主力群 272998585 Wolong就在这群!
thepandacoin[PANDA]
Wolong(狗庄)心血力作，目前算力已达8G，小平台日交易量400+BTC，火爆bitcointalk论坛，由此出现了5种仿制熊猫币了。。。
2月28日前 在IRC #pandacoin 聊天室聊天，有机会获得5000W PANDA抽奖
February 16, 2014, 08:42:51 AM
i cant for the life of me to get vertminer working properly. ive tried mulitpel setting and either it crashes or i cant mine more then 3 khash on a 280x. makes no sense.
can anyone with a single 280x help me out with a command/miner combination that works.
first person who post the working bat setup ill give my first 2 block finds just post your address in the message
first of all, try to reboot computer? someone had the same problem yesterday, probably driver malfunctioned and a reboot helpedcan anyone with a single 280x help me out with a command/miner combination that works.
first person who post the working bat setup ill give my first 2 block finds just post your address in the message
second, go to chaosagent's pool and there should be a simple guide there
for 280x, seems most of the setting still the same, -I 13 -tc 8192 -w 256, -g 2
good luck
So now I'm back to manual restarting :/
Thank you very, very much for tipping me on CG Watcher.
I downloaded the latest version here: http://manotechnology.blogspot.com/p/cgwatcher.html .
I stalled it and am running it.
Finally i can go to sleep. My miners shutdown 30-40 times in 24h.
I am in testmode right now to see if they mining continues now al the time, even after a powerdrop.
Thanks again.
A lot of people have good experience with cgwatcher
My problems are not with cgwatcher itself but elsewhere
Good luck to you
February 16, 2014, 08:38:54 AM
280x=375K 270x=240K 等挖矿参数可到群共享参考。
Pandacoin□China□#1 主力群 272998585 Wolong就在这群!
thepandacoin[PANDA]
Wolong(狗庄)心血力作，目前算力已达8G，小平台日交易量400+BTC，火爆bitcointalk论坛，由此出现了5种仿制熊猫币了。。。
2月28日前 在IRC #pandacoin 聊天室聊天，有机会获得5000W PANDA抽奖
Pandacoin□China□#1 主力群 272998585 Wolong就在这群!
thepandacoin[PANDA]
Wolong(狗庄)心血力作，目前算力已达8G，小平台日交易量400+BTC，火爆bitcointalk论坛，由此出现了5种仿制熊猫币了。。。
2月28日前 在IRC #pandacoin 聊天室聊天，有机会获得5000W PANDA抽奖
February 16, 2014, 08:29:28 AM
"I have given orders to my 100 chinese Panda Miners to bring in 100 miners each from China, be it their friends or spread online."
Not good. Diff is already high enough. We dont need 100 chinese miner farms joining us with each 100 MH/s.
But it was the plan all along… Did you really think this coin was made for you? "I AM CHINESE" Not good. Diff is already high enough. We dont need 100 chinese miner farms joining us with each 100 MH/s.
February 16, 2014, 08:25:09 AM
"I have given orders to my 100 chinese Panda Miners to bring in 100 miners each from China, be it their friends or spread online."
Not good. Diff is already high enough. We dont need 100 chinese miner farms joining us with each 100 MH/s.
Not good. Diff is already high enough. We dont need 100 chinese miner farms joining us with each 100 MH/s.
How about everybody leaves , and you'll be the only person mining this coin. Wold that make you happy enough ?
February 16, 2014, 08:23:37 AM
At current price, roughly 920-950 BTC is enough to buy all panda lol.
4.47 Ghs in vertminer = roughly 9Ghs for any scrypt => big big success for a few days old coin.
SELL ME ALL YOUR CHEAP PANDA hehe
4.47 Ghs in vertminer = roughly 9Ghs for any scrypt => big big success for a few days old coin.
SELL ME ALL YOUR CHEAP PANDA hehe
Lol . that's not even the price of 1 real panda.
February 16, 2014, 08:18:21 AM
"I have given orders to my 100 chinese Panda Miners to bring in 100 miners each from China, be it their friends or spread online."
Not good. Diff is already high enough. We dont need 100 chinese miner farms joining us with each 100 MH/s.
Not good. Diff is already high enough. We dont need 100 chinese miner farms joining us with each 100 MH/s.
If that is true then we better start buying up now then!
February 16, 2014, 08:13:25 AM
"I have given orders to my 100 chinese Panda Miners to bring in 100 miners each from China, be it their friends or spread online."
Not good. Diff is already high enough. We dont need 100 chinese miner farms joining us with each 100 MH/s.
Not good. Diff is already high enough. We dont need 100 chinese miner farms joining us with each 100 MH/s.
February 16, 2014, 08:12:11 AM
February 16, 2014, 08:06:33 AM
i cant for the life of me to get vertminer working properly. ive tried mulitpel setting and either it crashes or i cant mine more then 3 khash on a 280x. makes no sense.
can anyone with a single 280x help me out with a command/miner combination that works.
first person who post the working bat setup ill give my first 2 block finds just post your address in the message
first of all, try to reboot computer? someone had the same problem yesterday, probably driver malfunctioned and a reboot helpedcan anyone with a single 280x help me out with a command/miner combination that works.
first person who post the working bat setup ill give my first 2 block finds just post your address in the message
second, go to chaosagent's pool and there should be a simple guide there
for 280x, seems most of the setting still the same, -I 13 -tc 8192 -w 256, -g 2
good luck
So now I'm back to manual restarting :/
Thank you very, very much for tipping me on CG Watcher.
I downloaded the latest version here: http://manotechnology.blogspot.com/p/cgwatcher.html .
I stalled it and am running it.
Finally i can go to sleep. My miners shutdown 30-40 times in 24h.
I am in testmode right now to see if they mining continues now al the time, even after a powerdrop.
Thanks again.
February 16, 2014, 08:06:07 AM
Is this more profitable than mining max/vert atm?
February 16, 2014, 07:59:05 AM
Can someone update how many pandacoins in total have been mined so far?
My calculation (not for sure 100% correct, but rough) is Nr blocks * avg of 500k let's say.
February 16, 2014, 07:56:49 AM
Can someone update how many pandacoins in total have been mined so far?
Jump to: