Author

Topic: PDUs and C13-C14 Cables (Read 199 times)

member
Activity: 504
Merit: 71
Just Getting Started...
January 30, 2018, 08:50:26 PM
#5
Hello, what PDUs do you recommend and do you use 14awg c13-c14 cables or what? I have about 100 amps available on 240v single phase.

I have some S9, L3+, D3 and A4+ i am plugging in.

Check this thread out, I posted a few things to look for.

https://bitcointalksearch.org/topic/some-pdu-parts-2835305
hero member
Activity: 723
Merit: 519
January 30, 2018, 08:46:13 PM
#4
Hello, what PDUs do you recommend and do you use 14awg c13-c14 cables or what? I have about 100 amps available on 240v single phase.

I have some S9, L3+, D3 and A4+ i am plugging in.

APC AP7911

These are switched which allow you to remotely power off/on each individual outlet. if you look hard enough can pick up really cheap
full member
Activity: 658
Merit: 118
January 09, 2018, 09:31:20 AM
#3
I tend to look for the enterprise grade stuff - HP, TrippLite, APC, etc.

Any of those will work, and you tend to get good prices because companies are liquidating old hardware.
legendary
Activity: 1302
Merit: 1068
January 08, 2018, 10:12:11 PM
#2
I recommend getting some used PDUs on ebay, i do use c13-c14 also c19/20 sometimes. Personally i go for switched PDU but you can get some really cheap stuff if you dont want any bells and whistles. Check for the APC 7XXX/8XXX i guess? But i figure anything not from some never heard of manufacturer may do.
jr. member
Activity: 89
Merit: 1
January 08, 2018, 08:44:03 PM
#1
Hello, what PDUs do you recommend and do you use 14awg c13-c14 cables or what? I have about 100 amps available on 240v single phase.

I have some S9, L3+, D3 and A4+ i am plugging in.
Jump to: