Perfect outdoor rig | Bitcointalksearch.org

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: jk_14 on March 03, 2017, 03:31:27 AM

there is nice contest here:
https://bitcointalksearch.org/topic/m.18045600

so... fighting for Grand Prix Wink

Done!

P.S.
I must add one more hint...
it's nice to preserve SLI pins at least with some adhesive tape or plastic cover
because some of pins may be dimmed after months

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: felixbrucker on March 03, 2017, 01:15:32 PM

the current project wouldnt work for windy installations i suppose, rain would just be blown sideways inside the container
where i live the wind can blow rain at an almost 90° angle

during that more than half of year - there were many rainy, really windy days
that metal netting surface is just to catch a watter drops,
and doubled one by one in 1cm distance - is just to catch most strong watter drops, which potentially goes beyond the first surface

as I wrote somewhere: after some time, I forgot my early thoughts about switching it off during a storm

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: m1n1ngP4d4w4n on March 03, 2017, 12:27:01 PM

Hot air being lighter than cool air, it create under the table a pocket of hot air protecting your hardware from humidity & such,

that is exactly what I want to say... PSU is more sensitive for humidity than GPU's (e.g. my 750Ti were totally humidity resistant)
and PSU takes an air a bit warmed by GPUs, so the humidity is decreased there

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: felixbrucker on March 03, 2017, 03:07:19 PM

Quote from: m1n1ngP4d4w4n on March 03, 2017, 02:27:49 PM

Quote from: felixbrucker on March 03, 2017, 01:15:32 PM

the current project wouldnt work for windy installations i suppose, rain would just be blown sideways inside the container
where i live the wind can blow rain at an almost 90° angle

It would be possible if you make a cube out of the table, you screw the tablefeet onto a wood plate, and weight it with a brick or 2, that should take care of the wind, just increase the size of the sides you could also put additional sides @45° angles to break the wind/rain but keep cool air coming. It wouldn't come as cheap as original solution but not that much more

yeah that might work, building something like an umbrella around/on top of the table

stickied for later use Tongue

if you ever build it send some pics Wink

felixbrucker

hero member

Activity: 700

Merit: 500

Quote from: m1n1ngP4d4w4n on March 03, 2017, 02:27:49 PM

Quote from: felixbrucker on March 03, 2017, 01:15:32 PM

the current project wouldnt work for windy installations i suppose, rain would just be blown sideways inside the container
where i live the wind can blow rain at an almost 90° angle

It would be possible if you make a cube out of the table, you screw the tablefeet onto a wood plate, and weight it with a brick or 2, that should take care of the wind, just increase the size of the sides you could also put additional sides @45° angles to break the wind/rain but keep cool air coming. It wouldn't come as cheap as original solution but not that much more

yeah that might work, building something like an umbrella around/on top of the table

stickied for later use Tongue

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: felixbrucker on March 03, 2017, 01:15:32 PM

the current project wouldnt work for windy installations i suppose, rain would just be blown sideways inside the container
where i live the wind can blow rain at an almost 90° angle

It would be possible if you make a cube out of the table, you screw the tablefeet onto a wood plate, and weight it with a brick or 2, that should take care of the wind, just increase the size of the sides you could also put additional sides @45° angles to break the wind/rain but keep cool air coming. It wouldn't come as cheap as original solution but not that much more

felixbrucker

hero member

Activity: 700

Merit: 500

the current project wouldnt work for windy installations i suppose, rain would just be blown sideways inside the container
where i live the wind can blow rain at an almost 90° angle

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Quote from: jk_14 on March 03, 2017, 04:16:55 AM

Quote from: PrinceofPersia994 on March 03, 2017, 04:09:58 AM

You say mobo and psu is proteted against humidity? how?

because the way how air circulate under the table and some instalation gadgets

the best proof is that all of my PSU's still work fine,
after summer and winter true tests

Hot air being lighter than cool air, it create under the table a pocket of hot air protecting your hardware from humidity & such, i guess you didn't put it in a too much windy place

For the insect life i bet it would be enough to just have sides to keep the hot air, and a fine grill under to close up the rig space. Should also keep rodents out

kisk

full member

Activity: 126

Merit: 100

Still curious... unless you have an inlet of dry air coming in how does the table alone protect against humidity?

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: Golku on March 03, 2017, 04:32:04 AM

What a awesome project!!

I was thinking about this but then I changed my mind because the birds and insects would harm the Rig.

DIY manual (click on image):

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: NeuroticFish on March 03, 2017, 04:31:37 AM

Quote from: jk_14 on March 03, 2017, 04:16:55 AM

because the way how air circulate under the table and some instalation gadgets

the best proof is that all of my PSU's still work fine,
after summer and winter true tests

Superb! What are the lowest temperatures your rig has experienced in the winter?
And what were the highest temperatures in summer?

I really like your design!

between -15 -20C degree in winter (fans sometimes stop for a while)
25-30 in summer (GPU about 70C and fans 50%)

Golku

full member

Activity: 263

Merit: 100

What a awesome project!!

I was thinking about this but then I changed my mind because the birds and insects would harm the Rig.

NeuroticFish

legendary

Activity: 3668

Merit: 6382

Looking for campaign manager? Contact icopress!

Quote from: jk_14 on March 03, 2017, 04:16:55 AM

because the way how air circulate under the table and some instalation gadgets

the best proof is that all of my PSU's still work fine,
after summer and winter true tests

Superb! What are the lowest temperatures your rig has experienced in the winter?
And what were the highest temperatures in summer?

I really like your design!

PrinceofPersia994

newbie

Activity: 12

Merit: 0

Quote from: jk_14 on March 03, 2017, 04:16:55 AM

Quote from: PrinceofPersia994 on March 03, 2017, 04:09:58 AM

You say mobo and psu is proteted against humidity? how?

because the way how air circulate under the table and some instalation gadgets

the best proof is that all of my PSU's still work fine,
after summer and winter true tests

Thanks, I have myself been toying with the idea but always ended up not trying because of moisture and dust from a road nearby, thats a bad combination Tongue

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: PrinceofPersia994 on March 03, 2017, 04:09:58 AM

You say mobo and psu is proteted against humidity? how?

because the way how air circulate under the table and some instalation gadgets

the best proof is that all of my PSU's still work fine,
after summer and winter true tests

PrinceofPersia994

newbie

Activity: 12

Merit: 0

You say mobo and psu is proteted against humidity? how?

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: m1n1ngP4d4w4n on March 03, 2017, 04:01:04 AM

Lol nice man, very creative

and cheap!

that Ikea LACK table costs 5 usd

m1n1ngP4d4w4n

full member

Activity: 224

Merit: 100

CryptoLearner

Lol nice man, very creative

jk_14

legendary

Activity: 1292

Merit: 1000

Ok, this rig passed a winter test perfectly, so it seems I may disclose it now...

there is nice contest here:
https://bitcointalksearch.org/topic/m.18045600

so... fighting for Grand Prix Wink

Redrose

hero member

Activity: 756

Merit: 502

Quote from: QuintLeo on August 12, 2016, 03:45:53 PM

Quote from: Redrose on August 12, 2016, 06:36:14 AM

It seems that the 1070 are very hot cards, because my R9 380 are colder with a reasonable fan speed and are in my not so cold basement. If I put my miners outside, they can get to 40°C or less easily I think.

Doubt it - R9 380s tend to run in the 70C-80C range OR HIGHER when mining from everything I've seen.
No bloody WAY they're running at 40c WHEN MINING.

If you have software that's claiming they're running that cool, I'd BET it's either broken or it was older software for the HD 7xxx / R9 2xx series that wasn't updated correctly for the R9 3xx series.

Now, with MSI Afterburner, I can tell you that my cards are running between 52°C and 59°C with fans pushed at a bit more of half of their capacity.

Topic: Perfect outdoor rig (Read 2840 times)