Pages:
Author

Topic: PHI born from its ashes. Φ PhiCoin Φ Phiwallet.com Φ PhiChain.info Φ EXCHANGED - page 11. (Read 69740 times)

legendary
Activity: 1876
Merit: 1014
REVOLUTION TIME!


I was getting pretty irritated by all these great coins that lost the support of the developer, so I'm trying to start an independent foundation, the Coin Revival Foundation (CFA), that revives these coins and keeps advancing them.

My aim is to give altcoins back to the community and away from speculative whales! Smiley

Come to the topic to discuss this if you like and explain why Phicoin would be a good coin to take into consideration.


Come and join! Smiley
https://bitcointalksearch.org/topic/m.6294074
legendary
Activity: 1876
Merit: 1014
sr. member
Activity: 374
Merit: 250
PHI is now on the Cryptokk voting list.
http://www.cryptokk.com/?p=votes

Good luck Wink

Why try to vote in a coin thats dead?? start by removing instead of adding already dead coins to get som balance in crypto world.
newbie
Activity: 56
Merit: 0
legendary
Activity: 1876
Merit: 1014
what*s hapend to this coin  ??  why is diff  so  down....almost  0   Undecided

The coin was doing pretty well, but the dev has not spoken in a while.
newbie
Activity: 14
Merit: 0
what*s hapend to this coin  ??  why is diff  so  down....almost  0   Undecided
legendary
Activity: 1876
Merit: 1014
I mined at multipool,, but got no pay-outs at all, while solving blocks. Anybody else having these problems?
hero member
Activity: 770
Merit: 500
newbie
Activity: 22
Merit: 0
         Value         Change
PHI    0.00038    +3289.83%

holyshit!

+1 going up today!! dev any updates?

i pointed 60mh on it , the diff increasing ..

Net hash rate is around 15-20mh/s now diff increasing MINE WHILE YOU CAN!

Let's get this coin some activity dev!
full member
Activity: 210
Merit: 100
LION Devloper, Graphics Designer!
         Value         Change
PHI    0.00038    +3289.83%

holyshit!

+1 going up today!! dev any updates?

i pointed 60mh on it , the diff increasing ..
newbie
Activity: 22
Merit: 0
         Value         Change
PHI    0.00038    +3289.83%

holyshit!

+1 going up today!! dev any updates?
full member
Activity: 210
Merit: 100
LION Devloper, Graphics Designer!
         Value         Change
PHI    0.00038    +3289.83%

holyshit!
legendary
Activity: 1876
Merit: 1014
hero member
Activity: 602
Merit: 500
this is not the real phicoin ... there will be another (better) one later.
The right phicoin needs above all have a rewarddecrease that goes proportional with phi (phi is about relations not only the number, fools).
See this:



Block Halving Rate =70 000 constant ... this rewarddecrease should be in phi-proportions instead it is constant ... the rest doesn't matter. If it hasn't the golden cut in rewarddecrease it's not the real phicoin.
just my 2 cents

edit: oh, i see ... it does that to an extend ... every day 0.161803 of total coin. But doesn't halving after 70.000 blocks interrupt that pattern? ... halving should be adjusted in some way ... make it pure and bring down the premine and i'll invest ... if it is pure (exactly golden cut rewarddecrease forever) and NO PREMINE it will be a splash. Like it is now it is not 100% the thing. Looks more like an amateurish first attempt.  

2nd edit:
to have the exact pattern blockreward should not halve but decrease always in phipattern (fibonacci) ... use fibonacci in time-intervals and payout ... please, if you do it make it right.

3rd edit:
this is what we really want:


screw 'halving' make it 'phiing' in fibonacci/phi timeintervals and also screw your greedy premine. You have to choose between total success and premine - you can't have both. If this dev can't do it please someone else make it happen. I am tired of halve baked pump and dump trash. If you can't do it perfect, then don't do it. You're just wasting the name. (sorry for having high standards and being grumpy)
legendary
Activity: 1876
Merit: 1014
my config

qt version 4.8.5

phicoin.conf

rpcuser=phiuser
rpcpassword=phipw
rpcport=1741
addnode=162.206.24.38
addnode=162.206.24.38
addnode= 106.186.119.138
addnode=5.47.25.40

windows 7 64bits

wallet ok synchro

i delete all remote folder , set up the phicoin.conf

not work !

can you luck on the debug was a not realy connect on your wallet ?

2014-03-24 16:50:27 trying connection 162.206.24.38:1744 lastseen=359911.1hrs
2014-03-24 16:50:31 connection timeout

2014-03-24 16:50:33 trying connection 106.186.119.138:1744 lastseen=359911.1hrs
2014-03-24 16:50:37 connection timeout

2014-03-24 16:50:38 trying connection 5.47.25.40:1744 lastseen=359911.1hrs
2014-03-24 16:50:42 connection timeout

very old not working add nodes !!!!!

-

just read the last posts. clearly it's working because of some nodes are in their peers.dat it! But the three nodes which are all here indicate very old and no longer go for ages.

Why the no posting a working node from its clienten?

WHYYYYY

I checked which nodes are connected via the console in debug window and get these:

5.255.66.44
79.114.55.35
193.37.138.34
207.12.89.92
95.85.55.156
188.165.194.96

If you go to the debug window in the console and to console, you can add them with these commands(one at a time):
Code:
addnode 5.255.66.44 add
addnode 79.114.55.35 add
addnode 193.37.138.34 add
addnode 207.12.89.92 add
addnode 95.85.55.156 add
addnode 188.165.194.96 add

Nodes added via debug window and it finally works!! thank you so much!! THE ONES THAT CANT SYNC ADD THOSE NODES

Just one more question, when I add them using debug window do they stay permanently?(maybe stupid question just wondering)

Cheers mates

That makes me very happy. Smiley I'm quite the technical noob myself, so suddenly feel like a coding god Cheesy

I think they stay permanently, but you can see what happens when you close it and restart.

Lets all be happy with some PHI  Roll Eyes

I confirm they remain there and wallet works perfectly now

HAPPY MINING!

P.D. Any active dev?? Huh

The DEV posted something a few days ago:

If we can deal, Phi will be added to Blockchain.Info!

Thanks for support, especially @Jonesd .
full member
Activity: 126
Merit: 100
1
my config

qt version 4.8.5

phicoin.conf

rpcuser=phiuser
rpcpassword=phipw
rpcport=1741
addnode=162.206.24.38
addnode=162.206.24.38
addnode= 106.186.119.138
addnode=5.47.25.40

windows 7 64bits

wallet ok synchro

i delete all remote folder , set up the phicoin.conf

not work !

can you luck on the debug was a not realy connect on your wallet ?

2014-03-24 16:50:27 trying connection 162.206.24.38:1744 lastseen=359911.1hrs
2014-03-24 16:50:31 connection timeout

2014-03-24 16:50:33 trying connection 106.186.119.138:1744 lastseen=359911.1hrs
2014-03-24 16:50:37 connection timeout

2014-03-24 16:50:38 trying connection 5.47.25.40:1744 lastseen=359911.1hrs
2014-03-24 16:50:42 connection timeout

very old not working add nodes !!!!!

-

just read the last posts. clearly it's working because of some nodes are in their peers.dat it! But the three nodes which are all here indicate very old and no longer go for ages.

Why the no posting a working node from its clienten?

WHYYYYY

I checked which nodes are connected via the console in debug window and get these:

5.255.66.44
79.114.55.35
193.37.138.34
207.12.89.92
95.85.55.156
188.165.194.96

If you go to the debug window in the console and to console, you can add them with these commands(one at a time):
Code:
addnode 5.255.66.44 add
addnode 79.114.55.35 add
addnode 193.37.138.34 add
addnode 207.12.89.92 add
addnode 95.85.55.156 add
addnode 188.165.194.96 add

Thx you guy !  Wink
newbie
Activity: 22
Merit: 0
my config

qt version 4.8.5

phicoin.conf

rpcuser=phiuser
rpcpassword=phipw
rpcport=1741
addnode=162.206.24.38
addnode=162.206.24.38
addnode= 106.186.119.138
addnode=5.47.25.40

windows 7 64bits

wallet ok synchro

i delete all remote folder , set up the phicoin.conf

not work !

can you luck on the debug was a not realy connect on your wallet ?

2014-03-24 16:50:27 trying connection 162.206.24.38:1744 lastseen=359911.1hrs
2014-03-24 16:50:31 connection timeout

2014-03-24 16:50:33 trying connection 106.186.119.138:1744 lastseen=359911.1hrs
2014-03-24 16:50:37 connection timeout

2014-03-24 16:50:38 trying connection 5.47.25.40:1744 lastseen=359911.1hrs
2014-03-24 16:50:42 connection timeout

very old not working add nodes !!!!!

-

just read the last posts. clearly it's working because of some nodes are in their peers.dat it! But the three nodes which are all here indicate very old and no longer go for ages.

Why the no posting a working node from its clienten?

WHYYYYY

I checked which nodes are connected via the console in debug window and get these:

5.255.66.44
79.114.55.35
193.37.138.34
207.12.89.92
95.85.55.156
188.165.194.96

If you go to the debug window in the console and to console, you can add them with these commands(one at a time):
Code:
addnode 5.255.66.44 add
addnode 79.114.55.35 add
addnode 193.37.138.34 add
addnode 207.12.89.92 add
addnode 95.85.55.156 add
addnode 188.165.194.96 add

Nodes added via debug window and it finally works!! thank you so much!! THE ONES THAT CANT SYNC ADD THOSE NODES

Just one more question, when I add them using debug window do they stay permanently?(maybe stupid question just wondering)

Cheers mates

That makes me very happy. Smiley I'm quite the technical noob myself, so suddenly feel like a coding god Cheesy

I think they stay permanently, but you can see what happens when you close it and restart.

Lets all be happy with some PHI  Roll Eyes

I confirm they remain there and wallet works perfectly now

HAPPY MINING!

P.D. Any active dev?? Huh
legendary
Activity: 1876
Merit: 1014
my config

qt version 4.8.5

phicoin.conf

rpcuser=phiuser
rpcpassword=phipw
rpcport=1741
addnode=162.206.24.38
addnode=162.206.24.38
addnode= 106.186.119.138
addnode=5.47.25.40

windows 7 64bits

wallet ok synchro

i delete all remote folder , set up the phicoin.conf

not work !

can you luck on the debug was a not realy connect on your wallet ?

2014-03-24 16:50:27 trying connection 162.206.24.38:1744 lastseen=359911.1hrs
2014-03-24 16:50:31 connection timeout

2014-03-24 16:50:33 trying connection 106.186.119.138:1744 lastseen=359911.1hrs
2014-03-24 16:50:37 connection timeout

2014-03-24 16:50:38 trying connection 5.47.25.40:1744 lastseen=359911.1hrs
2014-03-24 16:50:42 connection timeout

very old not working add nodes !!!!!

-

just read the last posts. clearly it's working because of some nodes are in their peers.dat it! But the three nodes which are all here indicate very old and no longer go for ages.

Why the no posting a working node from its clienten?

WHYYYYY

I checked which nodes are connected via the console in debug window and get these:

5.255.66.44
79.114.55.35
193.37.138.34
207.12.89.92
95.85.55.156
188.165.194.96

If you go to the debug window in the console and to console, you can add them with these commands(one at a time):
Code:
addnode 5.255.66.44 add
addnode 79.114.55.35 add
addnode 193.37.138.34 add
addnode 207.12.89.92 add
addnode 95.85.55.156 add
addnode 188.165.194.96 add

Nodes added via debug window and it finally works!! thank you so much!! THE ONES THAT CANT SYNC ADD THOSE NODES

Just one more question, when I add them using debug window do they stay permanently?(maybe stupid question just wondering)

Cheers mates

That makes me very happy. Smiley I'm quite the technical noob myself, so suddenly feel like a coding god Cheesy

I think they stay permanently, but you can see what happens when you close it and restart.
newbie
Activity: 22
Merit: 0
my config

qt version 4.8.5

phicoin.conf

rpcuser=phiuser
rpcpassword=phipw
rpcport=1741
addnode=162.206.24.38
addnode=162.206.24.38
addnode= 106.186.119.138
addnode=5.47.25.40

windows 7 64bits

wallet ok synchro

i delete all remote folder , set up the phicoin.conf

not work !

can you luck on the debug was a not realy connect on your wallet ?

2014-03-24 16:50:27 trying connection 162.206.24.38:1744 lastseen=359911.1hrs
2014-03-24 16:50:31 connection timeout

2014-03-24 16:50:33 trying connection 106.186.119.138:1744 lastseen=359911.1hrs
2014-03-24 16:50:37 connection timeout

2014-03-24 16:50:38 trying connection 5.47.25.40:1744 lastseen=359911.1hrs
2014-03-24 16:50:42 connection timeout

very old not working add nodes !!!!!

-

just read the last posts. clearly it's working because of some nodes are in their peers.dat it! But the three nodes which are all here indicate very old and no longer go for ages.

Why the no posting a working node from its clienten?

WHYYYYY

I checked which nodes are connected via the console in debug window and get these:

5.255.66.44
79.114.55.35
193.37.138.34
207.12.89.92
95.85.55.156
188.165.194.96

If you go to the debug window in the console and to console, you can add them with these commands(one at a time):
Code:
addnode 5.255.66.44 add
addnode 79.114.55.35 add
addnode 193.37.138.34 add
addnode 207.12.89.92 add
addnode 95.85.55.156 add
addnode 188.165.194.96 add

Nodes added via debug window and it finally works!! thank you so much!! THE ONES THAT CANT SYNC ADD THOSE NODES

Just one more question, when I add them using debug window do they stay permanently?(maybe stupid question just wondering)

Cheers mates
Pages:
Jump to: