Pages:
Author

Topic: Phoenix 2 Miner v2.0.0 - page 5. (Read 201568 times)

legendary
Activity: 1344
Merit: 1004
April 12, 2012, 06:32:04 AM
#27
lots of shit

Your config file would be nice to know, as well as any modifications to your phoenix (i dont recall being able to label vid cards like that, mine only show like [cl:1:1])

Also may I suggest using driver 11.12 or 12.1 (avoids cpu bug with multiple gpu) as well as installing 2.1 sdk and mining on that instead of 2.5 (gain 3-10mhash per gpu depending on number of shaders and core/mem frequencies)
Can get 2.1 SDK standalone @ http://dl.dropbox.com/u/9768004/ATIStreamSDK_dev.msi

Also have you tried other pools? I see you got disconnected from a server, might be a pool or isp problem. Eligius has been rock solid for me last few months, you can test it by connecting your miner to http://address:[email protected]:8337 where "address" is your bitcoin address. Doesn't require a signup or fee or anything, just change your backend and good to go. Mine is
Code:
backend = http://1CxcPP8FVktppy4PHTYJKnZFqQeyZ3jArb:[email protected]:8337
newbie
Activity: 51
Merit: 0
April 11, 2012, 06:19:09 PM
#26
Hi, I have a problem with phoenix2 (also with betas too).



I have 5 rigs with 3x58xx each of them. Today this happens with three of them. Previously with beta versions was the same - some rigs work, some - not.
Here are the logs:

Code:
[04/11/2012 19:54:52] Server gave new work; passing to WorkQueue
[04/11/2012 19:54:55] Server gave new work; passing to WorkQueue
[04/11/2012 19:54:59] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:03] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:05] [5850_2] Result 0000000071529d7c... ACCEPTED
[04/11/2012 19:55:06] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:07] [5850_3] Result 00000000a6dd02af... ACCEPTED
[04/11/2012 19:55:09] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:13] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:17] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:19] [5850_2] Result 000000008bd64087... ACCEPTED
[04/11/2012 19:55:20] [5850_3] Result 00000000e7db25fd... ACCEPTED
[04/11/2012 19:55:20] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:22] [5850_1] Result 00000000ca2b592e... ACCEPTED
[04/11/2012 19:55:24] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:28] [5850_1] Result 00000000042ddf57... ACCEPTED
[04/11/2012 19:55:28] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:28] [5850_3] Result 00000000b12f1832... ACCEPTED
[04/11/2012 19:55:28] LP: New work pushed
[04/11/2012 19:55:28] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:30] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:37] LP: New work pushed
[04/11/2012 19:55:37] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:39] Disconnected from server
[04/11/2012 19:55:41] Warning: work queue empty, miner is idle
[04/11/2012 19:55:52] [5850_2] Result 000000009b2b27f6... REJECTED
[04/11/2012 19:55:57] Couldn't connect to server, switching backend...
[04/11/2012 19:56:11] Couldn't connect to server, switching backend...
[04/11/2012 19:56:28] Couldn't connect to server, switching backend...
[04/11/2012 19:56:51] Couldn't connect to server, switching backend...
[04/11/2012 19:57:12] Couldn't connect to server, switching backend...
[04/11/2012 19:57:26] Couldn't connect to server, switching backend...
[04/11/2012 19:57:31] Couldn't connect to server, switching backend...
[04/11/2012 19:57:36] Couldn't connect to server, switching backend...
[04/11/2012 19:57:41] Couldn't connect to server, switching backend...
[04/11/2012 19:57:46] Couldn't connect to server, switching backend...
[04/11/2012 19:57:51] Couldn't connect to server, switching backend...
[04/11/2012 19:57:56] Couldn't connect to server, switching backend...
[04/11/2012 19:58:01] Couldn't connect to server, switching backend...
[04/11/2012 19:58:06] Couldn't connect to server, switching backend...
[04/11/2012 19:58:11] Couldn't connect to server, switching backend...
[04/11/2012 19:58:18] Connected to server
[04/11/2012 19:58:18] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:18] New block (WorkQueue)
[04/11/2012 19:58:18] Currently on block: 51154
[04/11/2012 19:58:18] Primary backend is available, switching back...
[04/11/2012 19:58:18] Disconnected from server
[04/11/2012 19:58:18] Warning: work queue empty, miner is idle
[04/11/2012 19:58:21] Connected to server
[04/11/2012 19:58:21] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:21] Warning: work queue empty, miner is idle
[04/11/2012 19:58:21] [5850_2] Result 0000000073e7e231... REJECTED
[04/11/2012 19:58:25] LP: New work pushed
[04/11/2012 19:58:25] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:25] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:29] Warning: work queue empty, miner is idle
[04/11/2012 19:58:45] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:45] Warning: work queue empty, miner is idle
[04/11/2012 19:58:53] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:53] Warning: work queue empty, miner is idle
[04/11/2012 19:59:07] [5850_3] Result 000000004486ceaf... ACCEPTED
[04/11/2012 19:59:28] Server gave new work; passing to WorkQueue
[04/11/2012 19:59:28] Warning: work queue empty, miner is idle
[04/11/2012 19:59:29] LP: New work pushed
[04/11/2012 19:59:29] Server gave new work; passing to WorkQueue
[04/11/2012 19:59:30] [5850_3] Result 00000000599ca27b... ACCEPTED
[04/11/2012 19:59:30] Warning: work queue empty, miner is idle
[04/11/2012 19:59:45] [5850_2] Result 000000002b2c3abb... ACCEPTED
[04/11/2012 20:00:20] [5850_3] Result 000000001c6aaf26... ACCEPTED
[04/11/2012 20:00:21] LP: New work pushed
[04/11/2012 20:00:21] Server gave new work; passing to WorkQueue
[04/11/2012 20:00:21] Warning: work queue empty, miner is idle
[04/11/2012 20:00:21] Server gave new work; passing to WorkQueue
[04/11/2012 20:00:23] [5850_2] Result 00000000be84b53b... ACCEPTED
[04/11/2012 20:00:23] Warning: work queue empty, miner is idle
[04/11/2012 20:00:23] [5850_2] Result 00000000e8bc5ffa... ACCEPTED
[04/11/2012 20:00:51] Server gave new work; passing to WorkQueue
[04/11/2012 20:00:51] Warning: work queue empty, miner is idle
[04/11/2012 20:00:52] [5850_2] Result 000000005a7a59a3... ACCEPTED
[04/11/2012 20:00:52] LP: New work pushed
[04/11/2012 20:00:52] Server gave new work; passing to WorkQueue
[04/11/2012 20:00:53] Server gave new work; passing to WorkQueue
[04/11/2012 20:00:59] Warning: work queue empty, miner is idle
[04/11/2012 20:01:54] LP: New work pushed
[04/11/2012 20:01:54] Server gave new work; passing to WorkQueue
[04/11/2012 20:01:54] Warning: work queue empty, miner is idle
[04/11/2012 20:01:55] Server gave new work; passing to WorkQueue
[04/11/2012 20:01:56] [5850_1] Result 000000008c10b0f2... ACCEPTED
[04/11/2012 20:01:56] [5850_1] Result 000000001ea0700a... ACCEPTED
[04/11/2012 20:01:57] Warning: work queue empty, miner is idle
[04/11/2012 20:02:17] Server gave new work; passing to WorkQueue
[04/11/2012 20:02:17] Warning: work queue empty, miner is idle
[04/11/2012 20:02:18] [5850_3] Result 0000000062aa0fa1... ACCEPTED

Code:
[04/11/2012 19:55:57] Couldn't connect to server, switching backend...
[04/11/2012 19:55:57] [5830_2] Result 0000000001196600... REJECTED
[04/11/2012 19:56:02] Couldn't connect to server, switching backend...
[04/11/2012 19:56:03] [5830_3] Result 000000002db66d06... REJECTED
[04/11/2012 19:56:19] [5830_1] Result 000000009e999689... REJECTED
[04/11/2012 19:56:19] Couldn't connect to server, switching backend...
[04/11/2012 19:56:31] Couldn't connect to server, switching backend...
[04/11/2012 19:56:31] [5830_2] Result 000000005893af72... REJECTED
[04/11/2012 19:56:47] Couldn't connect to server, switching backend...
[04/11/2012 19:56:52] Couldn't connect to server, switching backend...
[04/11/2012 19:56:57] Couldn't connect to server, switching backend...
[04/11/2012 19:57:02] Couldn't connect to server, switching backend...
[04/11/2012 19:57:07] Couldn't connect to server, switching backend...
[04/11/2012 19:57:12] Couldn't connect to server, switching backend...
[04/11/2012 19:57:17] Couldn't connect to server, switching backend...
[04/11/2012 19:57:22] Couldn't connect to server, switching backend...
[04/11/2012 19:57:27] Couldn't connect to server, switching backend...
[04/11/2012 19:57:32] Couldn't connect to server, switching backend...
[04/11/2012 19:57:37] Couldn't connect to server, switching backend...
[04/11/2012 19:57:42] Couldn't connect to server, switching backend...
[04/11/2012 19:57:47] Couldn't connect to server, switching backend...
[04/11/2012 19:57:52] Couldn't connect to server, switching backend...
[04/11/2012 19:57:57] Couldn't connect to server, switching backend...
[04/11/2012 19:58:02] Couldn't connect to server, switching backend...
[04/11/2012 19:58:07] Couldn't connect to server, switching backend...
[04/11/2012 19:58:12] Couldn't connect to server, switching backend...
[04/11/2012 19:58:17] Couldn't connect to server, switching backend...
[04/11/2012 19:58:20] Connected to server
[04/11/2012 19:58:20] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:20] New block (WorkQueue)
[04/11/2012 19:58:20] Currently on block: 51154
[04/11/2012 19:58:20] Primary backend is available, switching back...
[04/11/2012 19:58:20] Disconnected from server
[04/11/2012 19:58:20] Warning: work queue empty, miner is idle
[04/11/2012 19:58:22] Connected to server
[04/11/2012 19:58:22] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:23] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:26] LP: New work pushed
[04/11/2012 19:58:26] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:26] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:34] Warning: work queue empty, miner is idle

Code:
[04/11/2012 19:55:23] [5850_1] Result 00000000cfbb81d1... ACCEPTED
[04/11/2012 19:55:24] [5850_2] Result 000000004b0ce4c7... ACCEPTED
[04/11/2012 19:55:24] [5850_2] Result 00000000faea5e27... ACCEPTED
[04/11/2012 19:55:24] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:26] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:29] LP: New work pushed
[04/11/2012 19:55:29] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:32] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:38] Warning: work queue empty, miner is idle
[04/11/2012 19:55:38] LP: New work pushed
[04/11/2012 19:55:38] Server gave new work; passing to WorkQueue
[04/11/2012 19:55:40] Disconnected from server
[04/11/2012 19:55:43] Warning: work queue empty, miner is idle
[04/11/2012 19:55:52] [5850_3] Result 0000000063ce60e3... REJECTED
[04/11/2012 19:55:57] Couldn't connect to server, switching backend...
[04/11/2012 19:56:02] [5850_1] Result 000000005b3ffe36... REJECTED
[04/11/2012 19:56:12] Couldn't connect to server, switching backend...
[04/11/2012 19:56:17] [5850_3] Result 000000009e2d3922... REJECTED
[04/11/2012 19:56:22] Couldn't connect to server, switching backend...
[04/11/2012 19:56:22] [5850_1] Result 0000000002dc00be... REJECTED
[04/11/2012 19:56:36] Couldn't connect to server, switching backend...
[04/11/2012 19:56:41] Couldn't connect to server, switching backend...
[04/11/2012 19:56:58] Couldn't connect to server, switching backend...
[04/11/2012 19:57:03] Couldn't connect to server, switching backend...
[04/11/2012 19:57:08] Couldn't connect to server, switching backend...
[04/11/2012 19:57:13] Couldn't connect to server, switching backend...
[04/11/2012 19:57:18] Couldn't connect to server, switching backend...
[04/11/2012 19:57:23] Couldn't connect to server, switching backend...
[04/11/2012 19:57:28] Couldn't connect to server, switching backend...
[04/11/2012 19:57:33] Couldn't connect to server, switching backend...
[04/11/2012 19:57:38] Couldn't connect to server, switching backend...
[04/11/2012 19:57:43] Couldn't connect to server, switching backend...
[04/11/2012 19:57:48] Couldn't connect to server, switching backend...
[04/11/2012 19:57:53] Couldn't connect to server, switching backend...
[04/11/2012 19:57:58] Couldn't connect to server, switching backend...
[04/11/2012 19:58:03] Couldn't connect to server, switching backend...
[04/11/2012 19:58:08] Couldn't connect to server, switching backend...
[04/11/2012 19:58:13] Couldn't connect to server, switching backend...
[04/11/2012 19:58:19] Connected to server
[04/11/2012 19:58:19] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:19] New block (WorkQueue)
[04/11/2012 19:58:19] Currently on block: 51154
[04/11/2012 19:58:19] Primary backend is available, switching back...
[04/11/2012 19:58:19] Disconnected from server
[04/11/2012 19:58:19] Warning: work queue empty, miner is idle
[04/11/2012 19:58:21] Connected to server
[04/11/2012 19:58:21] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:21] Warning: work queue empty, miner is idle
[04/11/2012 19:58:22] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:25] LP: New work pushed
[04/11/2012 19:58:25] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:26] Server gave new work; passing to WorkQueue
[04/11/2012 19:58:30] Warning: work queue empty, miner is idle
[04/11/2012 19:59:01] Server gave new work; passing to WorkQueue
[04/11/2012 19:59:01] Warning: work queue empty, miner is idle

... and one hour idle after that.

Win 7 64-bit, Drivers 11,9/2,5.

Sorry for the long post, I don't see a spoiler.

Edit: my master pool is bitparking, backup - btcguild.
hero member
Activity: 812
Merit: 510
April 11, 2012, 08:40:00 AM
#25
I'm not sure if this is related to my build or not, but on my Windows PC, Phoenix 2 will just exit after about a minute of mining. No errors, it just stops.

Any ideas? And what do you want me to try...
Try running Phoenix with the help of a batch file; add a pause to it.

Code:
phoenix.exe
pause

The pause will allow you to see the output from Phoenix before it shuts down.

I just ran it directly from command line instead of using a pause...

It submits a couple shares, then just goes back to the cli asking for input...no error
legendary
Activity: 1344
Merit: 1004
April 11, 2012, 04:22:09 AM
#24
THIS IS ALL IRRELEVANT! FIXED BY RUNNING A REPAIR INSTALL OF MY 2.6 SDK! I don't actually use that SDK, but apparently it was important to have.

What can cause this error? I just fresh installed my win7 on an x79 chipset board and 3930K CPU, same radeon 5870 though.
this is my cfg.
Code:
[general]
backend = http://1CxcPP8FVktppy4PHTYJKnZFqQeyZ3jArb:[email protected]:8337

[cl:1:1]
kernel = phatk2
AGGRESSION = 5
VECTORS = true
BFI_INT = true
WORKSIZE = 128

[web]
disable = true

this is the error.


there are definately kernels in my plugins folder, I just download it fresh and it still wont work. help?
Is there a 'kernels' folder at the dir where phoenix.exe is located?
Hasn't been a kernels folder since RC2, Its now "plugins". I can literally copy a working phoenix from one of my miners to this new computer, open phoenix, and get that exact error. FWIW, renaming "plugins" to "kernels" jsut causes an entirely different error.
Code:
[04/11/2012 04:25:06] Welcome to Phoenix v2.0.0
[0 Khash/s] [0 Accepted] [0 Rejected] [DISCONNECTED]Traceback (most recent call
last):
  File "phoenix.py", line 6, in
  File "phoenix2\__init__.pyo", line 51, in main
  File "phoenix2\core\PhoenixCore.pyo", line 90, in start
  File "phoenix2\core\PhoenixCore.pyo", line 144, in discoverPlugins
WindowsError: [Error 3] The system cannot find the path specified: 'D:\\phoenix
5870\\plugins/*.*'
So it's definately finding the opencl and phatk2 folders and kernels, but something specific to my hardware is making it not work. I also have 2.6 SDK (851.4) and 2.1 SDK (145) installed just like how I had it on the old mobo/cpu/ram, shows up fine in gpu caps viewer. Is there a debug mode that could possibly reveal the problem?

Edit: I also tried phoenix 2.0 RC2, same error. I also tried phoenix 1.7.5 and I got an interesting error.
Code:
D:\ph>phoenix.exe -u http://1CxcPP8FVktppy4PHTYJKnZFqQeyZ3jArb:[email protected]:8337 -k phatk2 PLATFORM=1 DEVICE=1 VECTORS BFI_INT AGGRESSION=5 WORKSIZE=128
Traceback (most recent call last):
  File "phoenix.py", line 124, in
  File "Miner.pyc", line 128, in start
  File "phoenix.py", line 112, in makeKernel
  File "kernels\phatk2\__init__.py", line 23, in
    import pyopencl as cl
  File "zipextimporter.pyc", line 82, in load_module
  File "pyopencl\__init__.pyc", line 3, in
  File "zipextimporter.pyc", line 98, in load_module
ImportError: MemoryLoadLibrary failed loading pyopencl\_cl.pyd

Do you think it has something to do with the fact that I have 64GB RAM?[/s]
legendary
Activity: 1288
Merit: 1227
Away on an extended break
April 11, 2012, 01:54:32 AM
#23
What can cause this error? I just fresh installed my win7 on an x79 chipset board and 3930K CPU, same radeon 5870 though.
this is my cfg.
Code:
[general]
backend = http://1CxcPP8FVktppy4PHTYJKnZFqQeyZ3jArb:[email protected]:8337

[cl:1:1]
kernel = phatk2
AGGRESSION = 5
VECTORS = true
BFI_INT = true
WORKSIZE = 128

[web]
disable = true

this is the error.


there are definately kernels in my plugins folder, I just download it fresh and it still wont work. help?
Is there a 'kernels' folder at the dir where phoenix.exe is located?
legendary
Activity: 1288
Merit: 1227
Away on an extended break
April 11, 2012, 01:50:18 AM
#22
I'm not sure if this is related to my build or not, but on my Windows PC, Phoenix 2 will just exit after about a minute of mining. No errors, it just stops.

Any ideas? And what do you want me to try...
Try running Phoenix with the help of a batch file; add a pause to it.

Code:
phoenix.exe
pause

The pause will allow you to see the output from Phoenix before it shuts down.
hero member
Activity: 742
Merit: 500
April 11, 2012, 01:24:33 AM
#21
Does 2.0.0 offer any hashing improvements over 1.7.x?
I believe so.  I haven't tested it personally (yet), but when BAMT added it, they claimed a small increase.


Are there any config options to make p2pool happier? I know cgminer has a couple options that make it work better.
legendary
Activity: 1344
Merit: 1004
April 11, 2012, 12:57:20 AM
#20
So nobody knows how to fix my problem? :/ I fresh installed on my last platform (evga 790i sli ultra, intel Q9550 @ 3.6ghz, 8gb ram) and it worked right away. Everything is identical except for cpu, motherboard, and ram (and associated hardware drivers) and it keeps saying "failed to load plugin 'opencl', failed to load plugin 'phatk2'" no matter what. my current hardware is an intel 3930K @ 4.7ghz, 64GB RAM, and MSI big bang xpower II (x79 chipset).

Anyone know how to fix my problem without reverting to previous hardware or switching OS? Currently use win7 x64 ult
hero member
Activity: 896
Merit: 1000
Seal Cub Clubbing Club
April 10, 2012, 05:34:25 PM
#19
Does 2.0.0 offer any hashing improvements over 1.7.x?
hero member
Activity: 812
Merit: 510
April 10, 2012, 05:30:48 PM
#18
I'm not sure if this is related to my build or not, but on my Windows PC, Phoenix 2 will just exit after about a minute of mining. No errors, it just stops.

Any ideas? And what do you want me to try...

Is there anything logged in the event viewer?
Sam

Nope nothing...
legendary
Activity: 3583
Merit: 1094
Think for yourself
April 10, 2012, 05:12:13 PM
#17
I'm not sure if this is related to my build or not, but on my Windows PC, Phoenix 2 will just exit after about a minute of mining. No errors, it just stops.

Any ideas? And what do you want me to try...

Is there anything logged in the event viewer?
Sam
hero member
Activity: 812
Merit: 510
April 10, 2012, 04:49:38 PM
#16
I'm not sure if this is related to my build or not, but on my Windows PC, Phoenix 2 will just exit after about a minute of mining. No errors, it just stops.

Any ideas? And what do you want me to try...
newbie
Activity: 58
Merit: 0
April 10, 2012, 03:56:43 PM
#15
Option logfile = false created file named false  Cheesy

The same thing happened to me. I had to comment out that line to suppress the log file.
legendary
Activity: 1344
Merit: 1004
April 10, 2012, 03:47:30 PM
#14
What can cause this error? I just fresh installed my win7 on an x79 chipset board and 3930K CPU, same radeon 5870 though.
this is my cfg.
Code:
[general]
backend = http://1CxcPP8FVktppy4PHTYJKnZFqQeyZ3jArb:[email protected]:8337

[cl:1:1]
kernel = phatk2
AGGRESSION = 5
VECTORS = true
BFI_INT = true
WORKSIZE = 128

[web]
disable = true

this is the error.


there are definately kernels in my plugins folder, I just download it fresh and it still wont work. help?
legendary
Activity: 3583
Merit: 1094
Think for yourself
April 10, 2012, 12:45:29 PM
#13
So many mining programs. What's the best and efficient one for HD5000 series cards? I know that's a very vague question, but I don't even know where to start to try out new miners.

I would suggest posting that question in a more neutral thread.
Sam
member
Activity: 65
Merit: 10
April 10, 2012, 05:57:20 AM
#12
Option logfile = false created file named false  Cheesy
member
Activity: 93
Merit: 10
April 09, 2012, 11:53:23 PM
#11
So many mining programs. What's the best and efficient one for HD5000 series cards? I know that's a very vague question, but I don't even know where to start to try out new miners.
legendary
Activity: 1344
Merit: 1004
April 08, 2012, 07:19:14 PM
#10
I'm getting very high CPU usage (20-25%) pretty evenly split between the four cores of a 2500k using Phatk2 and Phoenix2 mining with a single 6870. Any ideas what could cause that?

your driver. use a known driver/sdk combo that doesn't exhibit cpu bug. cpu bug is not a problem of the miner.

i use 11.12 or 12.1, and 2.1 SDK, but 2.4/2.5/2.6 should work too. no cpu bug on single/multi gpu.

It's driver version 12.3 with SDK 2.5. I didn't notice the excessive CPU usage under the old version, I'll have to check into it again.

12.3 definitely has CPU bug. 12.1 definitely does NOT have CPU bug. Not sure about 12.2, havent used yet.
legendary
Activity: 1344
Merit: 1004
April 08, 2012, 05:43:07 PM
#9
5830 @ 1030/205 phatk2 WORKSIZE = 128, BFI_INT = true, VECTORS = true, AGGRESSION = 12 with SDK 2.1 = 334.7 Mhash. With 2.5 SDK without GOFFSET is 329.5 MHash. With GOFFSET = true with 2.5 SDK 329.8MHash.

SDK 2.1 still king. Smiley Didn't use GOFFSET for 2.1 SDK because it's OpenCL 1.0, not 1.1. Doesn't affect hashes either.

edit: GOFFSET isn't used in phatk2, so hash rates are likely within error. I tried with OpenCL kernel and 2.5 SDK and with/without GOFFSET and didn't see a difference between with and without, though it did has at about 309.5 mhash.
legendary
Activity: 1344
Merit: 1004
April 08, 2012, 05:35:44 PM
#8
I'm getting very high CPU usage (20-25%) pretty evenly split between the four cores of a 2500k using Phatk2 and Phoenix2 mining with a single 6870. Any ideas what could cause that?

your driver. use a known driver/sdk combo that doesn't exhibit cpu bug. cpu bug is not a problem of the miner.

i use 11.12 or 12.1, and 2.1 SDK, but 2.4/2.5/2.6 should work too. no cpu bug on single/multi gpu.
Pages:
Jump to: