Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 269. (Read 784857 times)

Quote from: booze on June 27, 2020, 06:56:08 PM

Anyone care to share their batch file commands for nVidia cards? Im running a 1080ti with standard commands

PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal XXXXXXXXXXXXXXXXXXXXXXXXX.RigA -dpool stratum+tcp://blake2s.sea.mine.zpool.ca:5766 -dwal XXXXXXXXXXXXXXXXXXXXXXX-dcoin blake2s
pause

Examples of OC would be appreciated. Enjoy your weekend!

I'm using MSI Afterburner to control NVIDIA cards as it is possible to undervolt, Phoenix doesn't support undervolting at the moment. Currently running one single fan card @ 1645 Mhz, 774mv and +800 to memory clocks - 44 MH/s & 62-63c and MSI @ 1822 MHz, 825mv and +800 to memory - 48 MH/s and 58-60c. I'm trying to save as much power as possible.

thanks mate, im only getting 37mhs for some reason though :/

Are you using ETHlargement pill?

yes i am, but i was dual mining as well which is probably the problem. i think i will try claymore and dual mine sia for a while.

zeezoo

newbie

Activity: 42

Merit: 0

Quote from: zeezoo on June 27, 2020, 02:00:08 PM

Anyone care to share their batch file commands for nVidia cards? Im running a 1080ti with standard commands

PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal XXXXXXXXXXXXXXXXXXXXXXXXX.RigA -dpool stratum+tcp://blake2s.sea.mine.zpool.ca:5766 -dwal XXXXXXXXXXXXXXXXXXXXXXX-dcoin blake2s
pause

Examples of OC would be appreciated. Enjoy your weekend!

I'm using MSI Afterburner to control NVIDIA cards as it is possible to undervolt, Phoenix doesn't support undervolting at the moment. Currently running one single fan card @ 1645 Mhz, 774mv and +800 to memory clocks - 44 MH/s & 62-63c and MSI @ 1822 MHz, 825mv and +800 to memory - 48 MH/s and 58-60c. I'm trying to save as much power as possible.

thanks mate, im only getting 37mhs for some reason though :/

Are you using ETHlargement pill?

cidman

full member

Activity: 162

Merit: 102

Quote from: AzzAz on June 27, 2020, 07:51:56 PM

Any idea what could cause this? (there are two cards in PC, one RX580 and one RX560)

has to be cuz of windows registry
that sometimes happens when the same GPU is listed 2x and DDU should fix it
i would say try another windows drive and see if it happens there as well
then ull know for sure if its something stuck in reg or not
if u go to device manager and show hidden devices ull prolly see it there

Branko

sr. member

Activity: 2604

Merit: 326

Quote from: Branko on June 27, 2020, 03:07:50 PM

Quote from: zeezoo on June 26, 2020, 04:20:09 PM

Quote from: Branko on June 27, 2020, 03:07:50 PM

Any idea what could cause this? (there are two cards in PC, one RX580 and one RX560)

Did you try DDU and fresh drivers?

I did DDU and installed last drivers and last phoenix and got above problem. Previous driver + phoenix 4.9 worked fine

...so NO last driver...last that Phoenix team included is 20.4.2

I downgraded both Phoenix miner to 4,9c and driver to 20.4.2, no luck.
Only remaining suspect could be latest windows 10 build 2004

before you ask why, this is not rig but my PC, so I always try to have latest everything

AzzAz

legendary

Activity: 1030

Merit: 1006

Quote from: zeezoo on June 26, 2020, 04:20:09 PM

Quote from: zeezoo on June 27, 2020, 02:00:08 PM

Any idea what could cause this? (there are two cards in PC, one RX580 and one RX560)

Did you try DDU and fresh drivers?

I did DDU and installed last drivers and last phoenix and got above problem. Previous driver + phoenix 4.9 worked fine

...so NO last driver...last that Phoenix team included is 20.4.2

booze

jr. member

Activity: 51

Merit: 1

Quote from: zeezoo on June 26, 2020, 04:20:09 PM

Anyone care to share their batch file commands for nVidia cards? Im running a 1080ti with standard commands

PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal XXXXXXXXXXXXXXXXXXXXXXXXX.RigA -dpool stratum+tcp://blake2s.sea.mine.zpool.ca:5766 -dwal XXXXXXXXXXXXXXXXXXXXXXX-dcoin blake2s
pause

Examples of OC would be appreciated. Enjoy your weekend!

I'm using MSI Afterburner to control NVIDIA cards as it is possible to undervolt, Phoenix doesn't support undervolting at the moment. Currently running one single fan card @ 1645 Mhz, 774mv and +800 to memory clocks - 44 MH/s & 62-63c and MSI @ 1822 MHz, 825mv and +800 to memory - 48 MH/s and 58-60c. I'm trying to save as much power as possible.

thanks mate, im only getting 37mhs for some reason though :/

Branko

sr. member

Activity: 2604

Merit: 326

Any idea what could cause this? (there are two cards in PC, one RX580 and one RX560)

Did you try DDU and fresh drivers?

I did DDU and installed last drivers and last phoenix and got above problem. Previous driver + phoenix 4.9 worked fine

zeezoo

newbie

Activity: 42

Merit: 0

Quote from: ankah on June 26, 2020, 06:14:40 PM

Anyone care to share their batch file commands for nVidia cards? Im running a 1080ti with standard commands

PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal XXXXXXXXXXXXXXXXXXXXXXXXX.RigA -dpool stratum+tcp://blake2s.sea.mine.zpool.ca:5766 -dwal XXXXXXXXXXXXXXXXXXXXXXX-dcoin blake2s
pause

Examples of OC would be appreciated. Enjoy your weekend!

I'm using MSI Afterburner to control NVIDIA cards as it is possible to undervolt, Phoenix doesn't support undervolting at the moment. Currently running one single fan card @ 1645 Mhz, 774mv and +800 to memory clocks - 44 MH/s & 62-63c and MSI @ 1822 MHz, 825mv and +800 to memory - 48 MH/s and 58-60c. I'm trying to save as much power as possible.

booze

jr. member

Activity: 51

Merit: 1

Anyone care to share their batch file commands for nVidia cards? Im running a 1080ti with standard commands

PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal XXXXXXXXXXXXXXXXXXXXXXXXX.RigA -dpool stratum+tcp://blake2s.sea.mine.zpool.ca:5766 -dwal XXXXXXXXXXXXXXXXXXXXXXX-dcoin blake2s
pause

Examples of OC would be appreciated. Enjoy your weekend!

zeezoo

newbie

Activity: 42

Merit: 0

Quote from: ankah on June 26, 2020, 05:07:07 PM

Quote from: zeezoo on June 26, 2020, 04:26:12 PM

Quote from: ankah on June 26, 2020, 05:07:07 PM

Any known issues with Vega 64 (8gb, 4 cards)?
I have a brand new rig, fresh install and the whole system freezes around 22 to 25 seconds in, very consistently.
Windows 10

Log? Any tweaking? Under/Overclocking? Undervolting? Hard to tell without details

Let me look at getting logs. No, nothing was done one way or another. I figured I would run it, see where it was and go on from there.

What is the proper way to post the log? As code?

Anyhow, the last few lines of the last crash, which is about the same as the other logs.

Quote

2020.06.26:10:37:48.951: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2020.06.26:10:37:48.951: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0)
2020.06.26:10:37:48.956: GPU4 GPU4: DAG generated in 10.5 s (360.2 MB/s)
2020.06.26:10:37:48.958: GPU4 GPU4: Using Ethash OCL kernels (gfx900; -clkernel 1)
2020.06.26:10:37:48.958: GPU4 GPU4: no -gt value specified, switching to auto-tune
2020.06.26:10:37:48.958: GPU4 GPU4: starting auto-tune process
2020.06.26:10:37:49.313: GPU1 GPU1: DAG 100%
2020.06.26:10:37:49.472: GPU1 GPU1: DAG generated in 10.6 s (356.9 MB/s)
2020.06.26:10:37:49.475: GPU1 GPU1: Using Ethash OCL kernels (gfx900; -clkernel 1)
2020.06.26:10:37:49.475: GPU1 GPU1: no -gt value specified, switching to auto-tune
2020.06.26:10:37:49.475: GPU1 GPU1: starting auto-tune process
2020.06.26:10:37:51.322: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":
2020.06.26:10:37:51.322: eths Eth: New job #f98eea2b from ssl://us1.ethermine.org:5555; diff: 4000MH

Does the computer crash as well? If yes it might be an issue with power supply, cause it doesn't mine at all. You can try to underclock memory (-mclock) and core (-cclock) a little bit but since GPUs are new they should work at stock frequencies with no issues.

ankah

newbie

Activity: 5

Merit: 0

Quote from: zeezoo on June 26, 2020, 04:26:12 PM

Quote from: zeezoo on June 26, 2020, 04:26:12 PM

Any known issues with Vega 64 (8gb, 4 cards)?
I have a brand new rig, fresh install and the whole system freezes around 22 to 25 seconds in, very consistently.
Windows 10

Log? Any tweaking? Under/Overclocking? Undervolting? Hard to tell without details

Let me look at getting logs. No, nothing was done one way or another. I figured I would run it, see where it was and go on from there.

What is the proper way to post the log? As code?

Anyhow, the last few lines of the last crash, which is about the same as the other logs.

Quote

2020.06.26:10:37:48.951: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2020.06.26:10:37:48.951: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0)
2020.06.26:10:37:48.956: GPU4 GPU4: DAG generated in 10.5 s (360.2 MB/s)
2020.06.26:10:37:48.958: GPU4 GPU4: Using Ethash OCL kernels (gfx900; -clkernel 1)
2020.06.26:10:37:48.958: GPU4 GPU4: no -gt value specified, switching to auto-tune
2020.06.26:10:37:48.958: GPU4 GPU4: starting auto-tune process
2020.06.26:10:37:49.313: GPU1 GPU1: DAG 100%
2020.06.26:10:37:49.472: GPU1 GPU1: DAG generated in 10.6 s (356.9 MB/s)
2020.06.26:10:37:49.475: GPU1 GPU1: Using Ethash OCL kernels (gfx900; -clkernel 1)
2020.06.26:10:37:49.475: GPU1 GPU1: no -gt value specified, switching to auto-tune
2020.06.26:10:37:49.475: GPU1 GPU1: starting auto-tune process
2020.06.26:10:37:51.322: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":
2020.06.26:10:37:51.322: eths Eth: New job #f98eea2b from ssl://us1.ethermine.org:5555; diff: 4000MH

ankah

newbie

Activity: 5

Merit: 0

Any known issues with Vega 64 (8gb, 4 cards)?
I have a brand new rig, fresh install and the whole system freezes around 22 to 25 seconds in, very consistently.
Windows 10

Log? Any tweaking? Under/Overclocking? Undervolting? Hard to tell without details

Let me look at getting logs. No, nothing was done one way or another. I figured I would run it, see where it was and go on from there.

zeezoo

newbie

Activity: 42

Merit: 0

Any known issues with Vega 64 (8gb, 4 cards)?
I have a brand new rig, fresh install and the whole system freezes around 22 to 25 seconds in, very consistently.
Windows 10

Log? Any tweaking? Under/Overclocking? Undervolting? Hard to tell without details

zeezoo

newbie

Activity: 42

Merit: 0