Topic: [POOL] --- Coinotron --- RavenCoin PPS: 1.5% ----- PPLNS, RBPPS: 0% --------- - page 32. (Read 295319 times)
March 31, 2016, 06:27:25 PM
this hurt me so much
March 31, 2016, 04:02:16 AM
Stratum was down again ? got email alert at 18.20, stratum came back online around 20.26 ?
Seems to be alot of problems the last few days, hope it gets sorted out
Seems to be alot of problems the last few days, hope it gets sorted out
Servers were up and running but there were some network issues at datacenter. Incoming traffic was affected. Different part of the network were affected more or less.
They sorted that out after 2-3 hours.
March 30, 2016, 02:53:37 PM
Stratum was down again ? got email alert at 18.20, stratum came back online around 20.26 ?
Seems to be alot of problems the last few days, hope it gets sorted out
Seems to be alot of problems the last few days, hope it gets sorted out
March 29, 2016, 09:03:56 AM
Thats good to hear..
But i am on the stratum pool using your own proxy.
Maybe you could check it.
Ill leave my miners on and monitor over next 24hours
But i am on the stratum pool using your own proxy.
Maybe you could check it.
Ill leave my miners on and monitor over next 24hours
March 29, 2016, 08:01:32 AM
I dont know what is going on. Huge drop in reported hashrate throughout the night, again no email alert.
Iv no option but to change pool, support turnaround seems slow from coinotron with no clarification what is going on.
I would advise everyone using coinitron to check there miners and hash graphs.
Iv no option but to change pool, support turnaround seems slow from coinotron with no clarification what is going on.
I would advise everyone using coinitron to check there miners and hash graphs.
Our getwork eth pool is hammered by some wrongly configured miners.
I think we finally managed to filter out this spam.
ETH Stratum pool was unaffected.
March 29, 2016, 06:19:00 AM
I dont know what is going on. Huge drop in reported hashrate throughout the night, again no email alert.
Iv no option but to change pool, support turnaround seems slow from coinotron with no clarification what is going on.
I would advise everyone using coinitron to check there miners and hash graphs.
Iv no option but to change pool, support turnaround seems slow from coinotron with no clarification what is going on.
I would advise everyone using coinitron to check there miners and hash graphs.
March 28, 2016, 05:34:20 PM
I sent you a email coinotron.
Iv been down nearly 24 hours mining. Never got worker alert email.
It appears etminer stopped mining at around 2am.
Really frustrated im down all my ether for that time.
I asked a friend and the same happened to him.
Iv been down nearly 24 hours mining. Never got worker alert email.
It appears etminer stopped mining at around 2am.
Really frustrated im down all my ether for that time.
I asked a friend and the same happened to him.
March 28, 2016, 03:11:36 PM
Do you have any plans on adding a pool for expanse?
We had expanse pool, but in October or November we closed it due to very weak EXP network at that time.
Our wallet had problems finding active peers, so risk of finding ourselves on wrong fork was not acceptable.
Right now we are working on adding new servers. No plans for new coins, unless something like Etheremu shows up.
March 28, 2016, 01:43:25 PM
Do you have any plans on adding a pool for expanse?
March 28, 2016, 04:19:30 AM
Hi,
My miners have been stopped by 3 hours this morning with "ethminer-0.9.41-genoil-1.0.5". with this command "ethminer -G -S coinotron.com:3344 -O almartins.PC-34:PC-34". I' have changed manually to "ethminer-0.9.41" normal version and changed the command to "ethminer -G -F http://coinotron.com:3342/almartins.PC-34:PC-34/" and is working again but have lost 3 hours mining ether !!
Coinotron we need a failover solution, have you one ?
My miners have been stopped by 3 hours this morning with "ethminer-0.9.41-genoil-1.0.5". with this command "ethminer -G -S coinotron.com:3344 -O almartins.PC-34:PC-34". I' have changed manually to "ethminer-0.9.41" normal version and changed the command to "ethminer -G -F http://coinotron.com:3342/almartins.PC-34:PC-34/" and is working again but have lost 3 hours mining ether !!
Coinotron we need a failover solution, have you one ?
Sorry for this. I'm currently investigating this issue. I'm gathering data from logs and I will report it to genoil. It seems that ethminer just stuck with old blocks and kept them solving.
March 28, 2016, 03:33:45 AM
Hi,
My miners have been stopped by 3 hours this morning with "ethminer-0.9.41-genoil-1.0.5". with this command "ethminer -G -S coinotron.com:3344 -O almartins.PC-34:PC-34". I' have changed manually to "ethminer-0.9.41" normal version and changed the command to "ethminer -G -F http://coinotron.com:3342/almartins.PC-34:PC-34/" and is working again but have lost 3 hours mining ether !!
Coinotron we need a failover solution, have you one ?
My miners have been stopped by 3 hours this morning with "ethminer-0.9.41-genoil-1.0.5". with this command "ethminer -G -S coinotron.com:3344 -O almartins.PC-34:PC-34". I' have changed manually to "ethminer-0.9.41" normal version and changed the command to "ethminer -G -F http://coinotron.com:3342/almartins.PC-34:PC-34/" and is working again but have lost 3 hours mining ether !!
Coinotron we need a failover solution, have you one ?
March 26, 2016, 01:15:47 PM
Hello,I have some issue getting the eth from coinotron to my poloniex wallet,it is already over the minimum quantity and it hasnt transferred anything
Hi
Please email me your account name: [email protected]
March 26, 2016, 11:08:06 AM
FYI
We updated our website to be compatible with Ethereum EIP #55 Checksum address encoding
So now you can use ETH payout addresses that are encoded with checksum correction.
More info: https://www.reddit.com/r/ethereum/comments/470s3q/vitalik_made_a_very_clever_backwards_compatible/
Hello,I have some issue getting the eth from coinotron to my poloniex wallet,it is already over the minimum quantity and it hasnt transferred anything We updated our website to be compatible with Ethereum EIP #55 Checksum address encoding
So now you can use ETH payout addresses that are encoded with checksum correction.
More info: https://www.reddit.com/r/ethereum/comments/470s3q/vitalik_made_a_very_clever_backwards_compatible/
March 23, 2016, 05:34:57 AM
FYI
We updated our website to be compatible with Ethereum EIP #55 Checksum address encoding
So now you can use ETH payout addresses that are encoded with checksum correction.
More info: https://www.reddit.com/r/ethereum/comments/470s3q/vitalik_made_a_very_clever_backwards_compatible/
We updated our website to be compatible with Ethereum EIP #55 Checksum address encoding
So now you can use ETH payout addresses that are encoded with checksum correction.
More info: https://www.reddit.com/r/ethereum/comments/470s3q/vitalik_made_a_very_clever_backwards_compatible/
March 21, 2016, 09:01:38 AM
We support Stratum in our Ethereum pool for several months, but still almost 30% of miners use getwork protocol by mining on standard ethminer.
One option to switch to Stratum is to use our proxy together with ethminer: https://bitcointalksearch.org/topic/m.12695410
In this post we would like to recommend you second option:
The use of well known fork of ethminer created and maintained by Genoil: https://bitcointalksearch.org/topic/ethminer-0941-genoil-11-1368785
It is stable and natively supports Stratum, so no need for proxy.
We suggest using latest version ( which currently is ethminer-0.9.41-genoil-1.0.5 ) available here: https://github.com/Genoil/cpp-ethereum/tree/master/releases
Example:
ethminer -G -S coinotron.com:3344 -O username.workername:workerpassword
One option to switch to Stratum is to use our proxy together with ethminer: https://bitcointalksearch.org/topic/m.12695410
In this post we would like to recommend you second option:
The use of well known fork of ethminer created and maintained by Genoil: https://bitcointalksearch.org/topic/ethminer-0941-genoil-11-1368785
It is stable and natively supports Stratum, so no need for proxy.
We suggest using latest version ( which currently is ethminer-0.9.41-genoil-1.0.5 ) available here: https://github.com/Genoil/cpp-ethereum/tree/master/releases
Example:
ethminer -G -S coinotron.com:3344 -O username.workername:workerpassword
March 20, 2016, 11:32:25 AM
How to restore the account from a previously registered email??? Why this is not a simple link? I just forgot the password. When you try registering with the same email address gives a message that the account is present and cannot be again.
Please email me your account name ( [email protected] )
March 20, 2016, 11:31:12 AM
Hi Coinotron,
On the payout page, the "one time password" -- is that referring to account password or a new one?
I have problem in saving my coin addresses.
Thanks
citronick
On the payout page, the "one time password" -- is that referring to account password or a new one?
I have problem in saving my coin addresses.
Thanks
citronick
It is place to enter code from Google Authenticator. It shows up only if you have turned GA on.
March 19, 2016, 11:50:34 PM
How to restore the account from a previously registered email??? Why this is not a simple link? I just forgot the password. When you try registering with the same email address gives a message that the account is present and cannot be again.
March 19, 2016, 09:33:10 PM
Hi Coinotron,
On the payout page, the "one time password" -- is that referring to account password or a new one?
I have problem in saving my coin addresses.
Thanks
citronick
On the payout page, the "one time password" -- is that referring to account password or a new one?
I have problem in saving my coin addresses.
Thanks
citronick
March 19, 2016, 11:50:56 AM
Hello Guys,
iam new to Coinotron and ETH mining and got 2 questions,
first, iam just a small "for fun and learning" sparetime miner with a single 280x.
my miner is running for about 2-4h per day. is it better to shoose PPS payment or is PPLNS/RBPPS better even with that small amount of time my miner is running?
and, is the hashrate showen on the Coinotron website a better thing then in the miner? while iam running it looks like this:
The webiste tells me something between 17-26 mhz
Thanks for answers and have a nice weekend
iam new to Coinotron and ETH mining and got 2 questions,
first, iam just a small "for fun and learning" sparetime miner with a single 280x.
my miner is running for about 2-4h per day. is it better to shoose PPS payment or is PPLNS/RBPPS better even with that small amount of time my miner is running?
and, is the hashrate showen on the Coinotron website a better thing then in the miner? while iam running it looks like this:
The webiste tells me something between 17-26 mhz
Thanks for answers and have a nice weekend
Hashrates presented on our website are only estimations based on number of valid shares received in last 30 min span of time.
ETH pool uses very high share difficulty, therefore hashrate estimations have big variance.
Jump to: