Hi, pool owner i have to same problem last 40 hours maybe more paynements in Amber didn't arrived to my wallet(windows wallet) .Forex.
http://hashpower.co/explorer?id=844&txid=3ce72470a184208fedc9ba48959ad4b86d85a8e46c737de4873bedd57007ef89
Topic: [POOL] HASHPOWER.CO - YAAMP CLONE - X11, X13, X15, Quark, Neoscrypt - page 11. (Read 36536 times)
November 29, 2015, 07:33:47 PM
November 26, 2015, 11:00:41 PM
Pool owner, please check a QTL payment of about 420 coins. tx id: 3ea97f4bffee8a7abb2909d526a2a170ca0287ccd054c30e21ea863b19fd1231 .
It's a normal Bittrex QTL deposit address, but the coins have not shown up in 6 hours. When I click on your txid link, I get the following error:
It's a normal Bittrex QTL deposit address, but the coins have not shown up in 6 hours. When I click on your txid link, I get the following error:
Quote
Internal Server Error
Undefined index: blockhash
An internal error occurred while the Web server was processing your request. Please contact the webmaster to report this problem.
Undefined index: blockhash
An internal error occurred while the Web server was processing your request. Please contact the webmaster to report this problem.
November 24, 2015, 12:59:08 AM
so ive been mining with a few different rigs on a few diff algos the past couple weeks
kinda wondering why my payout is all over the place day to day
and i think there is something messed up with the profit switching algo (at least for lyrev2)
below is a 24 hour period from just one 750ti on lyrev2
i kept it there for about 4 days and 1 day it was higher but not by much like 10k sats
the day previous was about 2k sats lower
its nice when the monacoin hits (those are the big jumps u see) but even mining just vertcoin all day would be 2x the payout of this
either way the pool owner is missing out on a far better payout
the ppl mining are practically spending money to mine/are spending money if paying for electricity
and the estimated payouts are extremely far off and over 2x the actual daily
there was a whole 10 hour time frame where it just mined zoom mobile and lyrebars and only went up 1-2k sats
hope u can figure this out but i simply cant mine here anymore unless something changes
edit: just been trying to get the last bit of btc off so i switched to neoscrypt
this algo on this website pays pretty well as far as neoscrypt goes
prolly close to mining coins directly and exchanging to btc
kinda wondering why my payout is all over the place day to day
and i think there is something messed up with the profit switching algo (at least for lyrev2)
below is a 24 hour period from just one 750ti on lyrev2
i kept it there for about 4 days and 1 day it was higher but not by much like 10k sats
the day previous was about 2k sats lower
its nice when the monacoin hits (those are the big jumps u see) but even mining just vertcoin all day would be 2x the payout of this
either way the pool owner is missing out on a far better payout
the ppl mining are practically spending money to mine/are spending money if paying for electricity
and the estimated payouts are extremely far off and over 2x the actual daily
there was a whole 10 hour time frame where it just mined zoom mobile and lyrebars and only went up 1-2k sats
hope u can figure this out but i simply cant mine here anymore unless something changes
edit: just been trying to get the last bit of btc off so i switched to neoscrypt
this algo on this website pays pretty well as far as neoscrypt goes
prolly close to mining coins directly and exchanging to btc
November 19, 2015, 03:40:44 PM
hi,
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
Just wondering, are you looking for your miner under the correct algo you have it set too? And, did you use sp_'s 7zip .exe or compile it yourself? More than likely, I think you may be looking at the wrong algo. But....
wish that was true.
but no, I am looking at the right alog and i am looking at the right wallet. ( where it list the miners that your running). and i use the the down load. in my cmd file it shows up as .74 but on the pool and my wallet it comes up as .68,
The first line output when you start ccminer is the version. That's what the pool will display.
but it is not.
that is the reason that I started this, by asking the pool op to look into this.
Your mind seems closed to the fact you are not running the version of ccminer you think you are. Until you open
your mind I can't help you.
Good luck waiting for the OP.
November 19, 2015, 06:15:38 AM
hi,
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
Just wondering, are you looking for your miner under the correct algo you have it set too? And, did you use sp_'s 7zip .exe or compile it yourself? More than likely, I think you may be looking at the wrong algo. But....
wish that was true.
but no, I am looking at the right alog and i am looking at the right wallet. ( where it list the miners that your running). and i use the the down load. in my cmd file it shows up as .74 but on the pool and my wallet it comes up as .68,
The first line output when you start ccminer is the version. That's what the pool will display.
but it is not.
that is the reason that I started this, by asking the pool op to look into this.
November 18, 2015, 04:56:19 PM
hi,
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
Just wondering, are you looking for your miner under the correct algo you have it set too? And, did you use sp_'s 7zip .exe or compile it yourself? More than likely, I think you may be looking at the wrong algo. But....
wish that was true.
but no, I am looking at the right alog and i am looking at the right wallet. ( where it list the miners that your running). and i use the the down load. in my cmd file it shows up as .74 but on the pool and my wallet it comes up as .68,
The first line output when you start ccminer is the version. That's what the pool will display.
November 18, 2015, 12:10:31 AM
hi,
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
Just wondering, are you looking for your miner under the correct algo you have it set too? And, did you use sp_'s 7zip .exe or compile it yourself? More than likely, I think you may be looking at the wrong algo. But....
wish that was true.
but no, I am looking at the right alog and i am looking at the right wallet. ( where it list the miners that your running). and i use the the down load. in my cmd file it shows up as .74 but on the pool and my wallet it comes up as .68,
November 17, 2015, 12:39:57 PM
hi,
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
Just wondering, are you looking for your miner under the correct algo you have it set too? And, did you use sp_'s 7zip .exe or compile it yourself? More than likely, I think you may be looking at the wrong algo. But....
November 17, 2015, 10:01:47 AM
hi,
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
this question is for the pool opp. or at least I think it is.
from the ccminer version .69 till now (up to .74)
my units are all running on .74 sp-mod but it keeps showing them running as .68 sp-mod, both in the pool page and in my wallet.
true it does not make any difference in through put, but it just catches me off guard when I look while still half a sleep and see .68 and not the newest version .74
thanks
November 17, 2015, 09:54:18 AM
Well...I tried to help, but it's out of my realm now. Let us know if you figure it out. Anyone want to step in with their words of wisdom?
Sorry,
CapnBDL
the flag is -p d=xxx
November 15, 2015, 03:01:29 PM
Well...I tried to help, but it's out of my realm now. Let us know if you figure it out. Anyone want to step in with their words of wisdom?
Sorry,
CapnBDL
November 15, 2015, 05:31:27 AM
i set price -p p=0.0000082 for sha 256 i want mine only when i can earn 0.0080 for TH/btc/day
but the miner does not fall
why?
but the miner does not fall
why?
November 14, 2015, 10:08:48 PM
the p= doesnt work
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
Again, not my pool and I don't usually set the difficulty, I let the pool do that. However, instead of p=
Just a thought.
CapnBDL
p= is price
d= is diff
Excuse me then please. I was confused by the wording. You are right..syntax is so important. Messes up the WHOLE project. LOL You'll get it right.
My friend, you are a bit mistaken with this type of pool. p=...is the password (which almost no one uses), so in it's place the c=..is the norm, /w c= meaning the coin (algo). Sometimes, after that you can add a difficulty with the _xx. The underscore being the action.This pool is based on the old yaamp pool and I'm just trying to help. A few of the pools (Westhash,etc) allow the d=...as difficulty, not sure on this one. Not saying I know the code, just offering a different option. Can't hurt to try...what have you got to lose? Try it! Let me know, I'd like too.
Settle down. The question has nothing to do with difficulty or coin selection.
Hashpower (as did yaamp) supports a price option in the password according to the documentation. Just a wild guess but try
adding a leading zero: -p p=0.25. The p= option has multiple uses so it might be picky about syntax and insist a price start
with a numeric.
November 14, 2015, 09:43:17 PM
the p= doesnt work
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
Again, not my pool and I don't usually set the difficulty, I let the pool do that. However, instead of p=
Just a thought.
CapnBDL
p= is price
d= is diff
My friend, you are a bit mistaken with this type of pool. p=...is the password (which almost no one uses), so in it's place the c=..is the norm, /w c= meaning the coin (algo). Sometimes, after that you can add a difficulty with the _xx. The underscore being the action.This pool is based on the old yaamp pool and I'm just trying to help. A few of the pools (Westhash,etc) allow the d=...as difficulty, not sure on this one. Not saying I know the code, just offering a different option. Can't hurt to try...what have you got to lose? Try it! Let me know, I'd like too.
Settle down. The question has nothing to do with difficulty or coin selection.
Hashpower (as did yaamp) supports a price option in the password according to the documentation. Just a wild guess but try
adding a leading zero: -p p=0.25. The p= option has multiple uses so it might be picky about syntax and insist a price start
with a numeric.
November 14, 2015, 09:00:28 PM
the p= doesnt work
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
Again, not my pool and I don't usually set the difficulty, I let the pool do that. However, instead of p=
Just a thought.
CapnBDL
p= is price
d= is diff
My friend, you are a bit mistaken with this type of pool. p=...is the password (which almost no one uses), so in it's place the c=..is the norm, /w c= meaning the coin (algo). Sometimes, after that you can add a difficulty with the _x.xx. The underscore being the diff.This pool is based on the old yaamp pool and I'm just trying to help. A few of the pools (Westhash,etc) allow the d=...as difficulty, not sure on this one. Not saying I know the code, just offering a different option. Can't hurt to try...what have you got to lose? Try it! Let me know, I'd like too.
November 14, 2015, 12:04:03 PM
the p= doesnt work
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
Again, not my pool and I don't usually set the difficulty, I let the pool do that. However, instead of p=
Just a thought.
CapnBDL
p= is price
d= is diff
November 14, 2015, 10:53:56 AM
the p= doesnt work
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
Again, not my pool and I don't usually set the difficulty, I let the pool do that. However, instead of p=
Just a thought.
CapnBDL
November 14, 2015, 03:41:37 AM
the p= doesnt work
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
right now im hashing lyre at .18 and i have p=.25
thats below profitable at that point
November 12, 2015, 09:06:57 AM
set current estimate to 0 if coins mined is 0, this is for x13 and x15
November 10, 2015, 04:02:56 PM
hashpowerco
Please make payment to XuTMYSPwckCuDe7aLncTbo6RKKuGDMyKzG
Thank you!
P.S. Maybe you advise another currency, which is always available?
Please make payment to XuTMYSPwckCuDe7aLncTbo6RKKuGDMyKzG
Thank you!
P.S. Maybe you advise another currency, which is always available?
Jump to: