Topic: [POOL] pool.burstcoin.io [ No-Deadline Limit ] [ Instant Payout ] - page 2. (Read 40605 times)
December 03, 2014, 03:15:10 AM
Is beta-phase over? I noticed the updates on https://mining.burstcoin.io
December 01, 2014, 02:58:35 PM
Hi What does this ... Why does the ...http://s4.postimg.org/kj4x1bsn1/Bez_n_zvu.jpg
November 21, 2014, 02:03:18 AM
hi,
US pool gives no payout since 12 hours despite i have found 3 Blocks. The balance of the Pool (BURST-L28E-WSYC-F4N3-B82AC) is increasing though so theres definately something wrong.
US pool gives no payout since 12 hours despite i have found 3 Blocks. The balance of the Pool (BURST-L28E-WSYC-F4N3-B82AC) is increasing though so theres definately something wrong.
October 31, 2014, 12:47:33 PM
EU is extremely unstable today.
October 26, 2014, 10:21:22 AM
burstcoin.io US pool update
miners on burstcoin US pool, please restart your miner after block 17160 (if ur miner does not have auto resolve dns)
new Pool IP will be 23.227.167.164 , domain name will be same http://pool.burstcoin.io or http://burst-pool.cryptoport.io
i moved pool to new hosting, and i reduced pool fee from 2.5% to 1.5%, so better profit for miners
and pool running cost is reduced 4x cheaper, so BCPT holder would get better profit too
new host hardware is cheaper but faster, so will see performance improvement there
EU and SG pool also will follow the hosting migration, it might take a while because new hosting deployment is a bit complicated
miners on burstcoin US pool, please restart your miner after block 17160 (if ur miner does not have auto resolve dns)
new Pool IP will be 23.227.167.164 , domain name will be same http://pool.burstcoin.io or http://burst-pool.cryptoport.io
i moved pool to new hosting, and i reduced pool fee from 2.5% to 1.5%, so better profit for miners
and pool running cost is reduced 4x cheaper, so BCPT holder would get better profit too
new host hardware is cheaper but faster, so will see performance improvement there
EU and SG pool also will follow the hosting migration, it might take a while because new hosting deployment is a bit complicated
server migration is done for US, EU and SG pool
you might need to restart your miner, please check it
Pool IP :
[US] http://pool.burstcoin.io 23.227.167.164
[SG] http://pool2.burstcoin.io 23.227.163.49
[EU] http://pool3.burstcoin.io 23.227.167.165
October 26, 2014, 05:12:23 AM
burstcoin.io US pool update
miners on burstcoin US pool, please restart your miner after block 17160 (if ur miner does not have auto resolve dns)
new Pool IP will be 23.227.167.164 , domain name will be same http://pool.burstcoin.io or http://burst-pool.cryptoport.io
i moved pool to new hosting, and i reduced pool fee from 2.5% to 1.5%, so better profit for miners
and pool running cost is reduced 4x cheaper, so BCPT holder would get better profit too
new host hardware is cheaper but faster, so will see performance improvement there
EU and SG pool also will follow the hosting migration, it might take a while because new hosting deployment is a bit complicated
miners on burstcoin US pool, please restart your miner after block 17160 (if ur miner does not have auto resolve dns)
new Pool IP will be 23.227.167.164 , domain name will be same http://pool.burstcoin.io or http://burst-pool.cryptoport.io
i moved pool to new hosting, and i reduced pool fee from 2.5% to 1.5%, so better profit for miners
and pool running cost is reduced 4x cheaper, so BCPT holder would get better profit too
new host hardware is cheaper but faster, so will see performance improvement there
EU and SG pool also will follow the hosting migration, it might take a while because new hosting deployment is a bit complicated
October 18, 2014, 01:43:40 PM
Uray do you have news about the possibility to rent mining power from users?
October 16, 2014, 10:11:18 AM
java miner no longer work ? I keep getting unable to get mining info from wallet. I cleared my cache and my ping is correct
it still work, maybe you are seeing this while pool is still down
it works now.
October 16, 2014, 10:06:09 AM
java miner no longer work ? I keep getting unable to get mining info from wallet. I cleared my cache and my ping is correct
it still work, maybe you are seeing this while pool is still down
October 16, 2014, 07:32:51 AM
java miner no longer work ? I keep getting unable to get mining info from wallet. I cleared my cache and my ping is correct
October 16, 2014, 05:34:28 AM
when will the maintenance be completed
its completed
October 16, 2014, 05:12:41 AM
when will the maintenance be completed
October 16, 2014, 04:29:53 AM
Burstcoin.io Pool Update
[ Planned Downtime due to Maintenance ]
I made some optimization on software side, so it will check nonce deadline faster. in exchange to reduce pools running cost, server performance need to be tuned down a little bit, therefor I need to make hardware adjustment to all running pool [ US , SG , EU ]
due to this adjustment, i need to shutdown all the pools for couple of blocktime (10-15 minutes), and server public IP might change because of hardware migration, so there is chance that you need to restart your miner (if your miner does not have auto resolve dns) after pool is up again to resolve to new public IP.
pool down time will be planned at :
block 23570 for US pool
block 23560 for SG pool
block 23550 for EU pool
[ Planned Downtime due to Maintenance ]
I made some optimization on software side, so it will check nonce deadline faster. in exchange to reduce pools running cost, server performance need to be tuned down a little bit, therefor I need to make hardware adjustment to all running pool [ US , SG , EU ]
due to this adjustment, i need to shutdown all the pools for couple of blocktime (10-15 minutes), and server public IP might change because of hardware migration, so there is chance that you need to restart your miner (if your miner does not have auto resolve dns) after pool is up again to resolve to new public IP.
pool down time will be planned at :
block 23570 for US pool
block 23560 for SG pool
block 23550 for EU pool
all Pools restarted and now is up and running
please make sure that if you ping the pool hostname, it should reply from following IP address
US-Pool ( pool.burstcoin.io | pool-us.burstcoin.io | burst-pool.cryptoport.io ) -> 54.215.212.49
SG-Pool ( pool.burstcoin.io | pool-sg.burstcoin.io | burst-pool2.cryptoport.io ) -> 54.169.74.107
EU-Pool ( pool.burstcoin.io | pool-eu.burstcoin.io | burst-pool3.cryptoport.io ) -> 54.171.106.108
an also please check your miner, most of the miner does not re-resolve IP from DNS if the public IP is changed,
if your pool has error, then restart it and make sure if you ping the host it reply from above IP, if it is not, you need to flush or clear your DNS cache
and also if you are still using java miner, please change to blago's miners or my miner if you can, those miners has better compatibility and less nonce submit error.
October 16, 2014, 04:21:01 AM
Ok fair enough. I wish the maintenance to go smooth and without any issues. Just tell us when its ready 
October 16, 2014, 03:02:52 AM
Burstcoin.io Pool Update
[ Planned Downtime due to Maintenance ]
I made some optimization on software side, so it will check nonce deadline faster. in exchange to reduce pools running cost, server performance need to be tuned down a little bit, therefor I need to make hardware adjustment to all running pool [ US , SG , EU ]
due to this adjustment, i need to shutdown all the pools for couple of blocktime (10-15 minutes), and server public IP might change because of hardware migration, so there is chance that you need to restart your miner (if your miner does not have auto resolve dns) after pool is up again to resolve to new public IP.
pool down time will be planned at :
block 23570 for US pool
block 23560 for SG pool
block 23550 for EU pool
[ Planned Downtime due to Maintenance ]
I made some optimization on software side, so it will check nonce deadline faster. in exchange to reduce pools running cost, server performance need to be tuned down a little bit, therefor I need to make hardware adjustment to all running pool [ US , SG , EU ]
due to this adjustment, i need to shutdown all the pools for couple of blocktime (10-15 minutes), and server public IP might change because of hardware migration, so there is chance that you need to restart your miner (if your miner does not have auto resolve dns) after pool is up again to resolve to new public IP.
pool down time will be planned at :
block 23570 for US pool
block 23560 for SG pool
block 23550 for EU pool
October 13, 2014, 09:15:01 PM
Any thoughs why mz cc++ miner crashing once or twice a day?
October 10, 2014, 10:03:05 PM
Hi, Uray
Is there something wrong with your SG pool ?
For past 24 hours, got very very less payouts compared to previous days.
Also I have seen your pool shows no payouts for a very long period of time just shown in the screenshot, it shows no payouts for almost 66 rounds that's almost 4.5 hours.
Then suddenly at some point everything becomes zero & we don't get any payouts for those extended wait time ! Is it something that pool is not finding any block or what ?
Is there something wrong with your SG pool ?
For past 24 hours, got very very less payouts compared to previous days.
Also I have seen your pool shows no payouts for a very long period of time just shown in the screenshot, it shows no payouts for almost 66 rounds that's almost 4.5 hours.
Then suddenly at some point everything becomes zero & we don't get any payouts for those extended wait time ! Is it something that pool is not finding any block or what ?
October 09, 2014, 05:01:42 AM
hello guys I managed to register through this pool and when I run my miner I got this error
[ERROR][current date and time][default-akka.actor.default-dispatcher-9] [akka://default/user/$1/$c] null
[WARN][current date and time][default-akka.actor.default-dispatcher-9] [akka://default/user/$1/$c] Changing Resume into Create after akka.actor.ActorInitializationException: exception during creation
can you guys help me and tell me what went wrong on my setting or procedures, TIA
[ERROR][current date and time][default-akka.actor.default-dispatcher-9] [akka://default/user/$1/$c] null
[WARN][current date and time][default-akka.actor.default-dispatcher-9] [akka://default/user/$1/$c] Changing Resume into Create after akka.actor.ActorInitializationException: exception during creation
can you guys help me and tell me what went wrong on my setting or procedures, TIA
Mining with a Mac? If so, take a look at the first post of this thread https://bitcointalksearch.org/topic/m.8856669
October 09, 2014, 04:46:43 AM
hello guys I managed to register through this pool and when I run my miner I got this error
[ERROR][current date and time][default-akka.actor.default-dispatcher-9] [akka://default/user/$1/$c] null
[WARN][current date and time][default-akka.actor.default-dispatcher-9] [akka://default/user/$1/$c] Changing Resume into Create after akka.actor.ActorInitializationException: exception during creation
can you guys help me and tell me what went wrong on my setting or procedures, TIA
[ERROR][current date and time][default-akka.actor.default-dispatcher-9] [akka://default/user/$1/$c] null
[WARN][current date and time][default-akka.actor.default-dispatcher-9] [akka://default/user/$1/$c] Changing Resume into Create after akka.actor.ActorInitializationException: exception during creation
can you guys help me and tell me what went wrong on my setting or procedures, TIA
October 02, 2014, 06:35:20 PM
I hate to be a broken record but it happened again.
At block 18702 I had a balance of 214, at block 18703 it went to 0.
I have received no payout as of block 18707.
So it reset from 90 to 0 on Tuesday and 40 to 0 yesterday.
Can you look into this please?
Account: G7L5-JW6T-TKKM-9MNNL
Edit: the 214 just showed up.
At block 18702 I had a balance of 214, at block 18703 it went to 0.
I have received no payout as of block 18707.
So it reset from 90 to 0 on Tuesday and 40 to 0 yesterday.
Can you look into this please?
Account: G7L5-JW6T-TKKM-9MNNL
Edit: the 214 just showed up.
so.. your 214 are gone or what?
No I have them. Took about 10 blocks to show up. I'm being overly cautious just because of the other 90 and 40 that are missing.
Jump to: