Topic: Poor Radeon HD6950 Litecoin mining performance, need help [SOLVED] - page 2. (Read 26487 times)

I also tried each card on it's own. Same sub par hashing speeds.

Could it be something to do with the motherboard or ram? I am just reusing old hardware here, didn't really research the best components.

q6600@3ghz
Gigabyte EP45- ES3P
4Gb DDR2
700w PSU

Also, has anyone actually compared hash rates with windows 7 x64 and a linux distro?

Cheers, will grab that later. I put Ubuntu on earlier via a windows install....no idea what Im doing. I was stumped at installing the catalyst driver. Much reading to do.


Well, I'm still not really happy. People seem to be routinely getting 400+kh/s with 6950's without much difficulty. I can't get any higher than ~315 per card, and not really any idea why. Over clocking didnt make much difference. Too top it off one of my cards (gigabyte HD6950, reference board i think) runs super hot so it crashes easily. The other is a Sapphire HD6950 Dirt3 edition, much better cooling but it wont unlock the shaders after flashing. I'm just not having much luck.

At the moment it seems I'll have to accept 630kh/s is the most I will get out of the cards. Thanks for the link, I've been there earlier today, it did help quite a lot.


Yeah, I managed to unlock the extra shaders on my Gigabyte card, but it seemed to negatively effect the hash rate by about 10%. I've read that sometimes the extra shaders just aren't very good. Perhaps this is one of those cards that didn't quite make it as a 6970.

Gah, what a frustrating day. Girlfriend is pissed at me for sitting in front of the computer all day

Have you tried unlocking to 6970 shaders? I get 460 k/hash easily with my unlocked MSI 6950. Core clock 850 mhz.

it looks like someone already posted the right settings, but you can also use my thread
https://bitcointalksearch.org/topic/consolidated-litecoin-mining-guide-for-5xxx-6xxx-and-7xxx-gpus-117221

Yes, but if you're new to Linux, I'd say try Linux Mint (http://www.linuxmint.com/download.php) first. Grab the Cinnamon, 64-bit image.

Nope just mining, fresh install with bear minimum software and drivers on.

I'm going to have to do a Linux dual boot to compare I think. Is Ubuntu a good idea for a noob?

That is the best clocking for mine I have found seems weird you do not get better than you are on windows. Are you using the machine for anything else while mining? Mine are headless rigs that do nothing but mine.

Best numbers I've seen all weekend. Thank you.

With some overclocking I might reach 395kh/s per card.
http://i1098.photobucket.com/albums/g374/Negcreep69/Capture_zps0b0c263a.jpg

Sucks should be getting close to 800.


Try that with the core/memory speeds at 800/1250 that gives me ~395kh/s on mine on linux.

For some reason Reaper doesn't like when I input aggression at 20.  19 seems to be my magic number for my 6970s and for my old 5870.

And I've never tried Linux, so I wouldn't know 

I will try and work out if those linux variable are relevant for windows thanks. Actually that gives me another idea....try linux. I'm even more clueless when it comes to that thought.

Intensity all the way up to 20 only gives a max of 600kh/s for the pair. 

First, try to increase the aggression from 16 to 18 or 19.

I'm not sure if this is the same for windows but on linux it's needed to set these environment variables:
export DISPLAY=:0
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
cd /opt/miners/cgminer

Hi Guys,
I've been having a number of problems setting up a litecoin mining rig.
I'm currently running a q6600 rig with 4gb DDR2 and 2x HD6950 cards.  First thing I did was a fresh install of windows 7 64bit. Installed the latest ATI drivers 12.10 (SDK 2.8 ). Then I tried to configure cgminer 2.10.0 and Reaperv13 beta. I did try unlocking the shaders and overclocking the 6950's (up to 925/1350, 1.2v), but since I've been having trouble I've gone back to stock settings.

Here are the configs I've been using:
Reaper litecoin.conf:
host coinotron.com
port 8322
user xxx
pass xxx
protocol litecoin
worksize 256
aggression 16
threads_per_gpu 4
sharethreads 18
lookup_gap 2
gpu_thread_concurrency 5632

Cgminer:
cgminer --scrypt -o http://coinotron.com:8322 -u xxx -p xxx --shaders 1480 --intensity 18 --worksize 128 -g 1 --thread-concurrency 8192

Ok so the first big problem is that I'm getting quite low hashing scores from these cards. Between 290-300kh/s from each max, total 600kh/s(from both cgminer and Reaper). The Litecoin hardware comparison (http://wiki.litecoin.net/index.php/Mining_hardware_comparison) indicates I should be getting another 100-200kh/s per card from these babies. A little disappointing.

Second problem, I read that using catalyst 11.2 and SDK 2.5 may give better performance. I installed these, and then found that both cgminer and reaper couldn't start the Opencl kernel and refused to mine (same configs). In fact the only way I could fix this at all was to just reinstall the catalyst 12.10 driver package. Messing about with the drivers was also frustrating, crashing, blue screens and install failures all over the place.

Third problem, one of my cards seems to be 'unlockable', guess that's unlucky. The other card unlocks the extra shaders then performs about 10% less in mining hashrate. Guess the extra shaders are not any good. (Probably no solution to this one but I just thought id moan about it anyway)

Is there anyone out there who can help me? I've just spent most of the weekend trying to get better performance to no avail