Topic: [POT]PotCoin - Banking for the Legal Cannabis Industry ✦ ✦ ✦Grow With Us ✦ ✦ ✦ - page 388. (Read 920135 times)
January 22, 2014, 12:07:26 PM
Still rejecting 75% of the blocks I find. Seems a bit much to me
January 22, 2014, 11:19:00 AM
Finding blocks But don't getting them. Maybe my config file isn't as good as I thought?
I bet they`re orphaned. And it`s not a problem with your config. Enter listtransactions in debug console, there you`ll see if they`re orphans.
Could this be caused by using the wrong nodes?
I just used the same ones as lottocoin because I don't have anything better.
Remove those nodes. They will not work with this coin. Nodes are coin specific.
You don`t have to add nodes in config file unless your client doesn`t synch anymore.
Tnx I removed them, keep learning everyday here
January 22, 2014, 11:03:46 AM
Finding blocks But don't getting them. Maybe my config file isn't as good as I thought?
I bet they`re orphaned. And it`s not a problem with your config. Enter listtransactions in debug console, there you`ll see if they`re orphans.
Could this be caused by using the wrong nodes?
I just used the same ones as lottocoin because I don't have anything better.
Remove those nodes. They will not work with this coin. Nodes are coin specific.
You don`t have to add nodes in config file unless your client doesn`t synch anymore.
January 22, 2014, 11:01:42 AM
can't see sample config to solomine with wallet, is there any?
It`s the same as for every other coin.yes but still need rpcport
As long as you set the same port in your miner config.
are you sure about this ? What If I put same port in 2 config files and both clients are running.. I am asking because I am building an application which starts the client deamon and get information from wallets.. But I need RPC port to get that info.. So how does this work with multiple client opened
yes, i`m sure. Try it. Enter any valid rpcport for the coin-qt, set the same port in your miner config and you`re able to mine solo or access your clients through json-rpc.
If you want to run multiple clients just let them run on different ports.
for example....let potcoin run on 4242, bitcoin on 8332, litecoin on 8080...now set this ports in your json rpc connection and you can talk to all clients.
Using the same port on more than one client doesn`t make sense. First client started on this port will listen on that port. So if you start potcoin on 4242 and then litecoin on the same port you`ll always reach potcoin on 4242.
But i don`t know if litecoin isn`t reachable per rpc then or if it would set itself to defaultport.
These coins are just examples. It`s the same for all coins.
if i understand correctly, i learn something new...
so i don't need to change rpc for every coin...
just making a config file with a random rpc port number and renaming it will be enough for every coin?
(only will add nodes if wallet don't sync)
Yes, that`s how i do it and it works fine. Tested with around 25 different coins
They all have the same config except for the filename itself. And all run with the same cgminer config line.
But if you solomine you should have only one client running.
January 22, 2014, 11:00:39 AM
Finding blocks But don't getting them. Maybe my config file isn't as good as I thought?
I bet they`re orphaned. And it`s not a problem with your config. Enter listtransactions in debug console, there you`ll see if they`re orphans.
Could this be caused by using the wrong nodes?
I just used the same ones as lottocoin because I don't have anything better.
January 22, 2014, 10:49:52 AM
From the Netherlands, so must support 
haha 
Anyway slowly mining don't have such good hardward so all donations welcome !
PP91r191JegtAHttDovg5Mh49fFg43eGDw
haha Anyway slowly mining don't have such good hardward so all donations welcome !
PP91r191JegtAHttDovg5Mh49fFg43eGDw
January 22, 2014, 10:44:57 AM
can't see sample config to solomine with wallet, is there any?
It`s the same as for every other coin.yes but still need rpcport
As long as you set the same port in your miner config.
are you sure about this ? What If I put same port in 2 config files and both clients are running.. I am asking because I am building an application which starts the client deamon and get information from wallets.. But I need RPC port to get that info.. So how does this work with multiple client opened
yes, i`m sure. Try it. Enter any valid rpcport for the coin-qt, set the same port in your miner config and you`re able to mine solo or access your clients through json-rpc.
If you want to run multiple clients just let them run on different ports.
for example....let potcoin run on 4242, bitcoin on 8332, litecoin on 8080...now set this ports in your json rpc connection and you can talk to all clients.
Using the same port on more than one client doesn`t make sense. First client started on this port will listen on that port. So if you start potcoin on 4242 and then litecoin on the same port you`ll always reach potcoin on 4242.
But i don`t know if litecoin isn`t reachable per rpc then or if it would set itself to defaultport.
These coins are just examples. It`s the same for all coins.
if i understand correctly, i learn something new...
so i don't need to change rpc for every coin...
just making a config file with a random rpc port number and renaming it will be enough for every coin?
(only will add nodes if wallet don't sync)
January 22, 2014, 10:38:15 AM
Finding blocks But don't getting them. Maybe my config file isn't as good as I thought?
I bet they`re orphaned. And it`s not a problem with your config. Enter listtransactions in debug console, there you`ll see if they`re orphans.
January 22, 2014, 10:29:36 AM
WTS 12000 POT for 40 LTC
Paper and water pipe not included
Increments, you send first.
Paper and water pipe not included
Increments, you send first.
January 22, 2014, 10:26:54 AM
mining : )
POT PW2JCgU11F7VBq31LcHizYySj8AZkZPipD
POT PW2JCgU11F7VBq31LcHizYySj8AZkZPipD
January 22, 2014, 10:15:31 AM
can't see sample config to solomine with wallet, is there any?
It`s the same as for every other coin.yes but still need rpcport
As long as you set the same port in your miner config.
are you sure about this ? What If I put same port in 2 config files and both clients are running.. I am asking because I am building an application which starts the client deamon and get information from wallets.. But I need RPC port to get that info.. So how does this work with multiple client opened
yes, i`m sure. Try it. Enter any valid rpcport for the coin-qt, set the same port in your miner config and you`re able to mine solo or access your clients through json-rpc.
If you want to run multiple clients just let them run on different ports.
for example....let potcoin run on 4242, bitcoin on 8332, litecoin on 8080...now set this ports in your json rpc connection and you can talk to all clients.
Using the same port on more than one client doesn`t make sense. First client started on this port will listen on that port. So if you start potcoin on 4242 and then litecoin on the same port you`ll always reach potcoin on 4242.
But i don`t know if litecoin isn`t reachable per rpc then or if it would set itself to defaultport.
These coins are just examples. It`s the same for all coins.
January 22, 2014, 10:15:19 AM
SCryptoMiners PotCoin Pool
http://pot.scryptominers.com
Features
Minimum Payout: 1 PotCoin
Confirmations needed: 40
50 MH/s ~420 blocks found.
http://pot.scryptominers.com
Features
- PPLNS (Pay Per Last N Shares) reward system
- Vardiff
- Reliable system with load balanced stratum / database servers.
- Payouts processed within 60 seconds of withdrawal request or when auto payout threshold has been reached.
- 1% pool fee
Minimum Payout: 1 PotCoin
Confirmations needed: 40
50 MH/s ~420 blocks found.
January 22, 2014, 10:06:52 AM
Finding blocks But don't getting them. Maybe my config file isn't as good as I thought?
January 22, 2014, 09:30:41 AM
I am really liking the idea for this coin, we should get it to the sites that sell seeds and hydroponics 
January 22, 2014, 09:22:44 AM
listen=1
daemon=1
server=1
rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=16384
rpcconnect=127.0.0.*
addnode=173.51.180.254
addnode=217.121.72.66
addnode=1.64.154.85
addnode=63.246.129.56
I used this seems to working fine
Already found a block after 8 mins
daemon=1
server=1
rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=16384
rpcconnect=127.0.0.*
addnode=173.51.180.254
addnode=217.121.72.66
addnode=1.64.154.85
addnode=63.246.129.56
I used this seems to working fine
Already found a block after 8 mins
January 22, 2014, 08:46:00 AM
can't see sample config to solomine with wallet, is there any?
It`s the same as for every other coin.yes but still need rpcport
As long as you set the same port in your miner config.
are you sure about this ? What If I put same port in 2 config files and both clients are running.. I am asking because I am building an application which starts the client deamon and get information from wallets.. But I need RPC port to get that info.. So how does this work with multiple client opened
January 22, 2014, 08:21:43 AM
potlearn plz
sevoque
January 22, 2014, 08:16:51 AM
username - potuser
User ID - 52
Thanks
January 22, 2014, 08:16:17 AM
not sure if i had posted my userid...
username: jaydun
id: 17
thanks.
January 22, 2014, 08:13:35 AM
^^ Yeah we need to get POT on Cryptsy!
User name: Centori
Thanks
Done!
Thanks !!
User name: Centori
Thanks
Done!
Thanks !!
Jump to: