Pages:
Author

Topic: Primecoin GPU miner: 9.1 CPD on a 280x / pool / 2% dev.fee - page 29. (Read 100955 times)

hero member
Activity: 812
Merit: 1000
Great news...glad you sorted that out.
newbie
Activity: 56
Merit: 0
I just got my new rig up and mining.

I have a brand new ASUS R9280X-DC2T-3GD5
http://www.newegg.com/Product/Product.aspx?Item=N82E16814121803

Currently not over clocked everything is at stock.

My CPU is a I7 4770K

CPU Usage 8-12%

Primecoin GPU miner ver. 1.03
-----------------------------
Mining time: 1.22 hours
Est. Average Chains Per Day (CPD): 1.01
Est. Spot    Chains Per Day (CPD): 1.03

Pass: 1579
GPU #0   time: 279

10-ch   found: 0         expected: 0.052
blocks  found: 0         expected: 0.022


A few things i noticed is my GPU clock MHZ is auto dropping to 970 rather than staying at 1070. Is this normal?

Im also running at 95C for the GPU. seems right for it but not sure. I haven't had a good GPU in a few years.

Are my numbers correct for what i have? Seems low compared to other peoples setups.

Any advice would be great.

Thanks

Sounds like ur gpu is down clocking to base clocks due to temp 95oC is way to hot. My guess is ur fan is running to slow and the card is probably in a case (which isnt typically an issue with single card assuming u setup the  case right) Try keep the card below 70oC 60-70% fan should do that just fine. Setting cpuusage=9 should also improve ur CPD. Once u get ur temps under control u can try a moderate oc on the gpu to further improve ur CPD. As other users have stated tho stability over a tiny improvement of the stats.

I found the problem


one of the fans on the GPU wasn't spinning a wire had jammed it up.

As soon i freed it. Temps down to 73C solid with a little OC and back to 1.41 chains / day.
legendary
Activity: 1078
Merit: 1050
Still think a pool is a good idea..Thats 8 290x on that pool for 22 hours with claymores, and i must say, amazing new miner,......"WISH IT WAS SOLO" so i cant wait for pgpu's answer to claymores pool miner..it should be epic

traitor! any ways still is slower and that wont be all yours cause of the dev fee that will always be there where the other is a 1 time

To clarify a point of fact, with regard to the three miners now available, the developer (jonpry) of the NVidia one has stated that he will open source his -- which will obviously entail a reduction or elimination of the dev fee -- once the total amount collected from developer fees equals the bounty he initially offered as a target for releasing the code.

So, no, the dev fee will not always be there, provided the target is met.

Claymore has enabled a "no fee" option on his, I believe.

It actually seems like a very nice model.  I'm watching it with interest - I would consider adopting it for things I release in the future if it works out well.  Compared to a "sale" model, a dev fee has less risk for the people who use the miner and more risk for the developer, but enables more people to test out the software and see if they want to use it.
Agreed and there is great competition ramping up and i'm excited like i said to see what pgpu can do to answer to this competition however the three are in slightly different genres and really suit 3 types of miners which is great too..but all the same i am keen to see how pgpu respponds
dga
hero member
Activity: 737
Merit: 511
Still think a pool is a good idea..Thats 8 290x on that pool for 22 hours with claymores, and i must say, amazing new miner,......"WISH IT WAS SOLO" so i cant wait for pgpu's answer to claymores pool miner..it should be epic

traitor! any ways still is slower and that wont be all yours cause of the dev fee that will always be there where the other is a 1 time

To clarify a point of fact, with regard to the three miners now available, the developer (jonpry) of the NVidia one has stated that he will open source his -- which will obviously entail a reduction or elimination of the dev fee -- once the total amount collected from developer fees equals the bounty he initially offered as a target for releasing the code.

So, no, the dev fee will not always be there, provided the target is met.

Claymore has enabled a "no fee" option on his, I believe.

It actually seems like a very nice model.  I'm watching it with interest - I would consider adopting it for things I release in the future if it works out well.  Compared to a "sale" model, a dev fee has less risk for the people who use the miner and more risk for the developer, but enables more people to test out the software and see if they want to use it.
sr. member
Activity: 479
Merit: 250
Still think a pool is a good idea..Thats 8 290x on that pool for 22 hours with claymores, and i must say, amazing new miner,......"WISH IT WAS SOLO" so i cant wait for pgpu's answer to claymores pool miner..it should be epic


traitor! any ways still is slower and that wont be all yours cause of the dev fee that will always be there where the other is a 1 time

But thats what i'm saying..the miner is super fast but its on a pool and look at the payout for 9 blocks its found another 2 blocks and ive never found that many blocks with pgpu so im extremly excited to see their performance increase. btw claymores is optimized for 290x hence how well its doing. Im hating how raped im getting mining to a pool and that is my point Smiley

still not beating me and with all the coin dumping ill take the tx fees
legendary
Activity: 2492
Merit: 1473
LEALANA Bitcoin Grim Reaper
XPM Block rewards continue to drop...nice  Cheesy
legendary
Activity: 1078
Merit: 1050
Still think a pool is a good idea..Thats 8 290x on that pool for 22 hours with claymores, and i must say, amazing new miner,......"WISH IT WAS SOLO" so i cant wait for pgpu's answer to claymores pool miner..it should be epic


traitor! any ways still is slower and that wont be all yours cause of the dev fee that will always be there where the other is a 1 time

But thats what i'm saying..the miner is super fast but its on a pool and look at the payout for 9 blocks its found another 2 blocks and ive never found that many blocks with pgpu so im extremly excited to see their performance increase. btw claymores is optimized for 290x hence how well its doing. Im hating how raped im getting mining to a pool and that is my point Smiley
sr. member
Activity: 479
Merit: 250
3 blocks in 12hrs with 3 7970 2 290x
sr. member
Activity: 479
Merit: 250
Still think a pool is a good idea..Thats 8 290x on that pool for 22 hours with claymores, and i must say, amazing new miner,......"WISH IT WAS SOLO" so i cant wait for pgpu's answer to claymores pool miner..it should be epic


traitor! any ways still is slower and that wont be all yours cause of the dev fee that will always be there where the other is a 1 time
hero member
Activity: 799
Merit: 1000
http://xpm.muuttuja.org/charts/
 
Hold on this is shaping up to be one hell of a ride!
hero member
Activity: 518
Merit: 500
Still think a pool is a good idea..Thats 8 290x on that pool for 10 hours with claymores, and i must say, amazing new miner,......"WISH IT WAS SOLO" so i cant wait for pgpu's answer to claymores pool miner..it should be epic


Primegpu miner is still faster, but the other miner is pretty close.

I mine about 2 blocks every 24 hours with just one 7970.
legendary
Activity: 1078
Merit: 1050
Still think a pool is a good idea..Thats 8 290x on that pool for 22 hours with claymores, and i must say, amazing new miner,......"WISH IT WAS SOLO" so i cant wait for pgpu's answer to claymores pool miner..it should be epic
member
Activity: 78
Merit: 10
Thanks,


I thought 90C sounded hot.

Ill throw in some more 120mm fans and get some more air flowing.


Where do i add the CPUUSAGE=9?

you need something for fan and temp control
MSI Afterburner will help you
sr. member
Activity: 479
Merit: 250
Thanks,


I thought 90C sounded hot.

Ill throw in some more 120mm fans and get some more air flowing.


Where do i add the CPUUSAGE=9?

I haven't pass 62C on an ambient air of 87F with an Arctic Cooling Accelero Extreme 7970 gpu cooler on my MSI Twin Frozr III HD7970 OC BE.

Is your card reference design or a twin fan cooler?

what kind dont matter i buy nothing but ref models as they dont blow hot air on the pcb which coming from a guy who repairs cards is a bad thing as it expands and contracts the pcb more leading to solder lifting off the pads
i use ref cause it takes all heat away from the card and blows it out only thing is the blower fan is louder than non but they are miners in a place where im not worried about noise anyways saying that my temps are still below 70c
hero member
Activity: 966
Merit: 501
Thanks,


I thought 90C sounded hot.

Ill throw in some more 120mm fans and get some more air flowing.


Where do i add the CPUUSAGE=9?

right click on gpu server icon, properties, in target add -cpuusage=9 at the end
hero member
Activity: 518
Merit: 500
Thanks,


I thought 90C sounded hot.

Ill throw in some more 120mm fans and get some more air flowing.


Where do i add the CPUUSAGE=9?

I haven't pass 62C on an ambient air of 87F with an Arctic Cooling Accelero Extreme 7970 gpu cooler on my MSI Twin Frozr III HD7970 OC BE.

Is your card reference design or a twin fan cooler?
sr. member
Activity: 479
Merit: 250
Thanks,


I thought 90C sounded hot.

Ill throw in some more 120mm fans and get some more air flowing.


Where do i add the CPUUSAGE=9?

that wont help much u need to have your fan set not on auto anything over 80c is still too hot you will kill the card
newbie
Activity: 56
Merit: 0
Thanks,


I thought 90C sounded hot.

Ill throw in some more 120mm fans and get some more air flowing.


Where do i add the CPUUSAGE=9?
hero member
Activity: 799
Merit: 1000
I just got my new rig up and mining.

I have a brand new ASUS R9280X-DC2T-3GD5
http://www.newegg.com/Product/Product.aspx?Item=N82E16814121803

Currently not over clocked everything is at stock.

My CPU is a I7 4770K

CPU Usage 8-12%

Primecoin GPU miner ver. 1.03
-----------------------------
Mining time: 1.22 hours
Est. Average Chains Per Day (CPD): 1.01
Est. Spot    Chains Per Day (CPD): 1.03

Pass: 1579
GPU #0   time: 279

10-ch   found: 0         expected: 0.052
blocks  found: 0         expected: 0.022


A few things i noticed is my GPU clock MHZ is auto dropping to 970 rather than staying at 1070. Is this normal?

Im also running at 95C for the GPU. seems right for it but not sure. I haven't had a good GPU in a few years.

Are my numbers correct for what i have? Seems low compared to other peoples setups.

Any advice would be great.

Thanks

Sounds like ur gpu is down clocking to base clocks due to temp 95oC is way to hot. My guess is ur fan is running to slow and the card is probably in a case (which isnt typically an issue with single card assuming u setup the  case right) Try keep the card below 70oC 60-70% fan should do that just fine. Setting cpuusage=9 should also improve ur CPD. Once u get ur temps under control u can try a moderate oc on the gpu to further improve ur CPD. As other users have stated tho stability over a tiny improvement of the stats.
newbie
Activity: 56
Merit: 0
I just got my new rig up and mining.

I have a brand new ASUS R9280X-DC2T-3GD5
http://www.newegg.com/Product/Product.aspx?Item=N82E16814121803

Currently not over clocked everything is at stock.

My CPU is a I7 4770K

CPU Usage 8-12%

Primecoin GPU miner ver. 1.03
-----------------------------
Mining time: 1.22 hours
Est. Average Chains Per Day (CPD): 1.01
Est. Spot    Chains Per Day (CPD): 1.03

Pass: 1579
GPU #0   time: 279

10-ch   found: 0         expected: 0.052
blocks  found: 0         expected: 0.022


A few things i noticed is my GPU clock MHZ is auto dropping to 970 rather than staying at 1070. Is this normal?

Im also running at 95C for the GPU. seems right for it but not sure. I haven't had a good GPU in a few years.

Are my numbers correct for what i have? Seems low compared to other peoples setups.

Any advice would be great.

Thanks
Pages:
Jump to: