Pages:
Author

Topic: problem with miner 1th/s - page 2. (Read 1877 times)

legendary
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
May 20, 2015, 02:47:16 AM
#4
Also if you have Linux experience you might be able to ssh and overclock. But if my memory serves me right. They already have those 4 boards overclocked to 1000mhz.  The ssh login I used was login=pi. Pass= innosillicon
legendary
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
May 20, 2015, 02:42:02 AM
#3
miner is bought from
Code:
http://www.lketc.com/
but their support is very,very bad. They not responding.

I have next problem.
this is local host: http://prntscr.com/779170
and this is pool btcguild: http://prntscr.com/7791dc


I have never get over 900gh/s on any pool. Is there any fix for this? Firmware upgrade or something similar.

thanks

Can you post a pic of real-time monitoring. When I ran those machines I would get around 1020 ghs tops. Maybe you have a couple bad chips.  In my experience if you are running them on 110v then the psu installed is at its limit.  Could try taking an additional psu and pull one of the pcie connectors and put secondary on that board.  Turn the secondary on first then the main psu for dragon miner.  

If you get same results most likely that is all you can ever get.

Best regards
D57heinz
legendary
Activity: 3248
Merit: 1070
May 20, 2015, 02:39:51 AM
#2
if the difference in hashrate is only 10%, and you are seeing it in the pool, then it is normal, they usually dysplay an estimated only

also your local say average 950, seems good enough for me, 50giga difference could be for anything
newbie
Activity: 39
Merit: 0
May 20, 2015, 01:29:09 AM
#1
miner is bought from
Code:
http://www.lketc.com/
but their support is very,very bad. They not responding.

I have next problem.
this is local host: http://prntscr.com/779170
and this is pool btcguild: http://prntscr.com/7791dc


I have never get over 900gh/s on any pool. Is there any fix for this? Firmware upgrade or something similar.

thanks
Pages:
Jump to: