Pages:
Author

Topic: Project Interzone - Blockchain Social Engine - page 60. (Read 84799 times)

newbie
Activity: 75
Merit: 0
September 15, 2017, 11:48:53 AM
I am looking to buy ITZ coins I only need 3500 now. Please contact me if you are selling. Thank you.
legendary
Activity: 1513
Merit: 1040
September 15, 2017, 09:35:10 AM
Don't forget to set port forwarding if you are behind a router.

Quote
Can I put more than one masternode on there (with one plan)?
Yes, copy and paste that code a second time (or third,...depeding on the number of masternodes you want to set up) and change to another port and another masternode private key. You need 5000 coins each masternode.
Code:
rpcuser=here you enter any word with several alphanumeric characters
rpcpasswordhere you enter any word with several alphanumeric characters
listen=1
port=Port number you prefer
masternodeaddr=your external IP:same Port as above
masternode=1
masternodeprivkey=here you enter your masternode genkey
In command line you start all of your masternodes with
Code:
masternode start-many
Then check with
Code:
masternode list
If everything is fine you will see your nodes in that list with status "Enabled".
full member
Activity: 198
Merit: 101
September 15, 2017, 09:33:11 AM
Willing to buy large quantities of ITZ coins.

Please PM me your rate.
newbie
Activity: 19
Merit: 0
September 15, 2017, 08:59:43 AM
Hi, thanks for your reply, yes have read that guide in a previous post but is that set on a windows machine? Or can use a guide like https://www.chaincoin.org/how-to-setup-masternodes/? Can I put more than one masternode on there (with one plan)?


Hi,

I would like to set up a masternode for ITZ but I do not know how exactly. I know there are some tuts on internet (for DASH, PIVX), are they useful? Or do I need to follow one that is for chaincoin? Since I have little experience with Linux I would like to set it up on a windows machine, is that possible or recommended? I want to buy a VPS so I can put a masternode on it, what kind of VPS do I need? What do I need to look for? Is a static IP important? etc. And can I put more than one masternode on one VPS or do I need a second VPS for that? I hope someone can point me in the right direction. Thanks in advance!!

Masternodes INTER ZONE setup Guide

Requirements

     - static IP with open port 11994 for masternodes

STEP 1 : Prepairing controller wallet

    1 - Open your main wallet where you have your coins
    2 - Go to file tab / reception address
    3 - Press button "New address" and enter "MN1" in Label
    4 - Send to this address exactly 5000 coins
    5 - Wait for 15 confirmation of transaction and go to the Debug console
    6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
   
#################################################################################################################################################

STEP 2 : open the .conf file and complete this:
It have format:
Code:
rpcuser=here you enter any word with several alphanumeric characters
rpcpasswordhere you enter any word with several alphanumeric characters
listen=1
port=11994
masternode=1
masternodeprivkey=here you enter your masternode genkey

Save file

#################################################################################################################################################

STEP 3 : Starting masternodes

    - Close and restart your wallet
    - Go to Debug console and enter the command: MASTERNODE START


Thats all :-)

My wallet address INTER ZONE:   1M7hHAYicDCjKm7xaLGuLzLt1PMiXix2FH



For VPS i Use Vultr.com
full member
Activity: 198
Merit: 101
September 15, 2017, 08:53:12 AM
Willing to buy large quantities of ITZ coins.

Please PM me your rate.
full member
Activity: 322
Merit: 100
September 15, 2017, 08:44:51 AM
earlier i got 500 ITZ a day now i get only 150 a day

Network hash has grown a LOT.  Usually a good sign.
full member
Activity: 742
Merit: 100
stabilascan.org
September 15, 2017, 08:32:09 AM
earlier i got 500 ITZ a day now i get only 150 a day

What's your  hashrate with that 150 a day?
full member
Activity: 178
Merit: 100
September 15, 2017, 04:52:37 AM
earlier i got 500 ITZ a day now i get only 150 a day
full member
Activity: 148
Merit: 100
September 15, 2017, 03:21:53 AM
... It's possible to decrease like that.

My pool was mining 70% of the blocks until the 13th with 3 Gh/s.
If you check : https://umine.org/stats for c11
Since the 13th, there is 7+GH/s on this pool.

My pool mine 20% of the block now.

3Gh/s with 70% of the network hashrate before the 13th.
3Gh/s with 20% of the network hashrate since the 13th.

My previous explanation was wrong. I'm sorry. I did not investigate enough.
full member
Activity: 896
Merit: 108
September 15, 2017, 01:46:41 AM
mmmm...!
The amount of mining is decreasing!?

5h@150overITZ -> 5h@30ITZ

Not possible to decreast from 150 to 30
Check you mining rewards. You get some ITZ from rewards.

My pool - umine.org

I remember fro yesterday - 4.3% give me 1 ITZ on umine
And I check it now - 4.389% it 1.009378 ITZ


very thank you!
I try it!
member
Activity: 116
Merit: 10
September 15, 2017, 01:05:57 AM
mmmm...!
The amount of mining is decreasing!?

5h@150overITZ -> 5h@30ITZ

Not possible to decreast from 150 to 30
Check you mining rewards. You get some ITZ from rewards.

My pool - umine.org

I remember fro yesterday - 4.3% give me 1 ITZ on umine
And I check it now - 4.389% it 1.009378 ITZ

full member
Activity: 896
Merit: 108
September 15, 2017, 12:08:13 AM
The coal mine ground of bilbotel is very hard!
I moved to kraggle to try...
newbie
Activity: 21
Merit: 1
September 14, 2017, 06:15:41 PM
Windows GUI has been updated to 1.4.1 with Masternodes tab and SimpleMint readded and working:

https://interzone.space/Interzone-WIN.zip

https://www.virustotal.com/#/file-analysis/ZjlmMjE4YzcwZmI2M2U0YjNjYTRiZGU1YmViNGEyMzk6MTUwNTQzMDQ3Nw==

THIS UPDATE IS NOT REQUIRED. If you're using Linux or a VPS, you do NOT need to rebuild as long as you're on version 1.4 or later.

This update only addresses the graphical nodes list that had to be removed when we adjusted the code to fix the masternode payout issue. Mac/Linux builds in the works, we had some issues with the redistributable Mac versions, doing some additional testing and then we'll post links.
newbie
Activity: 5
Merit: 0
September 14, 2017, 06:05:48 PM

WTB 5000 ITZ for 0.14

PM me Smiley Thank you.
newbie
Activity: 54
Merit: 0
September 14, 2017, 05:21:39 PM
What is the RCP port for solo mining?
full member
Activity: 896
Merit: 108
September 14, 2017, 04:51:51 PM
mmmm...!
The amount of mining is decreasing!?

5h@150overITZ -> 5h@30ITZ

If you are mining on pool.bilbotel.fr, don't worry.

I just temporary reduce the payout timer to 2h to try instead of 5h.
When i saw the amount been sent, i switch back to 4h automatic payout. The amount were ridiculous and would induce high tx fee for miner when they want to send their coins to exchange.

Check your transaction log. You will see that's not 5h.

 Wink

The payout cycle was 2 hours!
..but, even so, the amount of mining is small.
Perhaps there is another big mine..
full member
Activity: 136
Merit: 100
September 14, 2017, 04:47:11 PM
Hello,

Has anyone experienced the wallet relocking by itself?  When it happens, I'm assuming my masternode is no longer staking/running, right?  Thanks.


hero member
Activity: 812
Merit: 500
September 14, 2017, 01:36:04 PM
Hi,

I would like to set up a masternode for ITZ but I do not know how exactly. I know there are some tuts on internet (for DASH, PIVX), are they useful? Or do I need to follow one that is for chaincoin? Since I have little experience with Linux I would like to set it up on a windows machine, is that possible or recommended? I want to buy a VPS so I can put a masternode on it, what kind of VPS do I need? What do I need to look for? Is a static IP important? etc. And can I put more than one masternode on one VPS or do I need a second VPS for that? I hope someone can point me in the right direction. Thanks in advance!!

Masternodes INTER ZONE setup Guide

Requirements

     - static IP with open port 11994 for masternodes

STEP 1 : Prepairing controller wallet

    1 - Open your main wallet where you have your coins
    2 - Go to file tab / reception address
    3 - Press button "New address" and enter "MN1" in Label
    4 - Send to this address exactly 5000 coins
    5 - Wait for 15 confirmation of transaction and go to the Debug console
    6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
   
#################################################################################################################################################

STEP 2 : open the .conf file and complete this:
It have format:
Code:
rpcuser=here you enter any word with several alphanumeric characters
rpcpasswordhere you enter any word with several alphanumeric characters
listen=1
port=11994
masternode=1
masternodeprivkey=here you enter your masternode genkey

Save file

#################################################################################################################################################

STEP 3 : Starting masternodes

    - Close and restart your wallet
    - Go to Debug console and enter the command: MASTERNODE START


Thats all :-)

My wallet address INTER ZONE:   1M7hHAYicDCjKm7xaLGuLzLt1PMiXix2FH



For VPS i Use Vultr.com
newbie
Activity: 19
Merit: 0
September 14, 2017, 01:31:54 PM
Hi,

I would like to set up a masternode for ITZ but I do not know how exactly. I know there are some tuts on internet (for DASH, PIVX), are they useful? Or do I need to follow one that is for chaincoin? Since I have little experience with Linux I would like to set it up on a windows machine, is that possible or recommended? I want to buy a VPS so I can put a masternode on it, what kind of VPS do I need? What do I need to look for? Is a static IP important? etc. And can I put more than one masternode on one VPS or do I need a second VPS for that? I hope someone can point me in the right direction. Thanks in advance!!
full member
Activity: 322
Merit: 100
September 14, 2017, 12:47:57 PM
When this coin hit exchange you won't see 3000 sat price anymore  Grin

I agree.  Sellers here are underestimating the value of masternode coins.  Thank you to all the investors buying from weak hands, buyers are a big part of the ecosystem.  

This is just my opinion, but I think buyers will be rewarded.  Look at masternodes.pro website, or look at VIVO coin (not listed at masternodes.pro, you have to research it on bitcointalk).  Almost all well-made masternode projects with a purpose (like this one) have market caps of US$500k or more.  VIVO achieved a much higher market cap even though it's not even a month old.

I can't guarantee InterZone will hit that, but it definitely has the $500k-$1million potential for market cap by year's end.  Which means people buying right now at valuations of $50k market cap will be rewarded as long as the chance of success is over 10% - i.e. a very low threshold.

Given the fair launch, instamine protections, dev being proactive with updates, and early buyer interest here, I suspect the chances of success are much higher than 10%, I'd say at least 50%, but that is just my opinion.  In fact, consider that dev sent pre-mine to cold storage, that this project has a concrete goal (social networks), and most important, that the C11 algorithm is not on NiceHash.  All of this will prevent it from being a dumpcoin, because people are far less likely to cloud mine and dump.  If you believe in the much higher than 50% success potential like me, keep buying away at current prices.


Edit: DEV I have a question: Are the "initial Interzone NetworkNodes" permanent nodes you will maintain for the life of this coin?  Because then circulating supply is actually much lower, and price even higher.


  • 50,000 ITZ to create initial Interzone NetworkNodes
  • 250,000 ITZ for the Interzone Early Access Program
  • 60,000 ITZ for promotional activities (faucets, airdrops, translations, etc)
  • 100,000 ITZ for long-term development stored in a public ledger account

Pages:
Jump to: