Topic: PROTOTYPES: Bitcoin Penny™ DIY (Fundable) Commemorative Coins (Read 2263 times)

DIY Penny packs received!!

thanks for these...the holograms are nice

will post some pics soon

You're very welcome, mj. And thank you.

And to all of you other crypto-collectors who want a few of these nifty little DIY fundable physical bitcoins, we still have a few 10-Packs remaining. Order now.

Regards,
Chris

monbux,

Thanks for the question. Actually, it's a little of both.

The backside is smooth to the touch, but the slight pattern of the BTC-symbol does show thru in the right lighting / angle. Regardless, the backside is perfectly smooth, and there is no evidence of the BTC-symbol under the stickers.

Please let me know if you have any more questions.

Regards,
Chris

One of those pennies seem to have the bitcoin symbol protruding from the back? Or are my eyes playing tricks on me?

We still have a few packs available, so PM or post if you want some of these limited DIY coins!

Regards,
Chris

Yes, it was one of yours.

I'm not sure if that particular Air-Tite™ was purchased from us (TBPCo), but the ones we offer are 23mm. (Perfect fit.)

Regards,
Chris

What size airtite is that?

Thanks for the photo, owlcatz!

Yes, you can see a slight BTC-shaped mark on the blank side, before adding the sticker to cover it. However, the blank side is already recessed. (The coin blank comes completely flat. Then, we use a blank die stamp to create the recessed edge /rim.) We could possibly create a second, more recessed square (or circle) in the center of the blank side, but we didn't need that for our particular prototyping purposes. And given the simple nature of our collectible coins, we didn't think a more recessed square was a high priority.

That said, if we receive enough interest in these DIY Bitcoin Penny™ physical bitcoins, then we will be more than happy to consider a full 2017 release, along with the possibility of a special recessed area.

Regarding the public addy, we'll have to consider that a bit more. It might be worth exploring. Personally, I never really cared about incorporating a public addy feature for these coins. Most of the DIY physical bitcoins I've owned don't come with any method of attaching the public addy to the coin. They simply rely on keeping the public addy written on a piece of paper, hopefully somewhere near the coin (like folded inside the coin's protective case). However, I suppose it would be simple enough to redesign the sticker to allow for a clear / see-thru strip in the middle. Why not?

Thanks again for your feedback, owlcatz. It's always welcome.

Regards,
Chris

PS -- We still have a few packs available, so PM or post if you want some of these limited DIY coins.

Here's one I put together last night.



I think it looks really sharp, however... I can see the stamp from the BTC symbol on the front on the back slightly from where it was pressed/made, so I assume there is really no room to create a recession for the paper key. I suppose one could always put a QR code underneath the holo of the private key, but not sure where the public key would go/fit?

It's a tough decision I guess. I suppose if they were slightly bigger or thicker, they would make decent BTC DIY wallets, but again, the size is a bit restrictive.

Anyhow, just my initial thoughts, I am still glad/happy to have some. 

Cheers!

LOL I was wondering who got the stain doodle.

Thanks, owlcatz!



Thank you, greenplastic. 


And please feel free to give any thoughts or feedback on these DIY coins. We're still deciding if / how to include them in our 2017 release, so any feedback would be very helpful.

Thanks again, everyone!

Regards,
Chris

My packs arrived today too, along with holograms!  Nice.

Thanks much, BP.   

Got my ten pack today! 




Better shot of the holos:



Thanks as always Chris!!

Only three (3) packs left!

Regards,
Chris

I believe we have four (4) packs left. PM on the way.

Regards,
Chris

Are you out yet? Drop me a pm if not. If so no worries. Am late like usual.

Payments received, digicoinuser and vizique! Thanks again.

Regards,
Chris @ TBPCo

Payment sent
Viz

Payment has been sent, thanks!

That's one pack for each of you. Thanks.

Who else wants one?

Regards,
Me