Topic: PSU shuts down with the S1 Antminer. (Read 2098 times)
I'm using cooler master 700 g series 80 Plus Bronze for Overclock Antminer S1. once in a while (3-4 days) it shuts off without any reason. Temp is around 42-44.
Yeah, what is the need for a cd-rom drive? 1. insert jumper wire into atx-24 pin connector 2. connect psu to antminer and power on 3. disable wifi on laptop and connect to antminer using ethernet cable 4. set wifi or ethernet settings and set miner configuration settings, save and apply 5. wait 30-40 seconds for ants to start mining, system --> reboot if necessary.
edit: you will need a wifi antenna if wireless mining.
edit: you will need a wifi antenna if wireless mining.
Some ATX power supplies are crappy and won't work if you only have things plugged into the +12 volt lines. The CDROM or resistor trick loads the +5 volt line as well and makes the crap supplies function normally. It's mostly older and super cheap supplies that have this problem so it is kind of rare.
Yeah, what is the need for a cd-rom drive? 1. insert jumper wire into atx-24 pin connector 2. connect psu to antminer and power on 3. disable wifi on laptop and connect to antminer using ethernet cable 4. set wifi or ethernet settings and set miner configuration settings, save and apply 5. wait 30-40 seconds for ants to start mining, system --> reboot if necessary.
edit: you will need a wifi antenna if wireless mining.
edit: you will need a wifi antenna if wireless mining.
You don't need to anything with the cd-rom crap.. I've had 4 ant miners powered for 3 weeks straight..
There's a lot of derp in this thread.
OP - the jumpers philipma1957 posted do work and eliminate the need for a cd-rom or HD plugged in. I've used them on several different PSUs on Ants and Cubes.
OP - the jumpers philipma1957 posted do work and eliminate the need for a cd-rom or HD plugged in. I've used them on several different PSUs on Ants and Cubes.
are you making good contact with the paperclip or is it loose? I'm running 2 overclocked antminers per 1 RM850 corsair psu. For the psu, I used a jumper wire(radio shack) and folded the ends(to make it thicker) before inserting into connector.
Looks like I'm screwed, I called the retailer and told him I want to swap the PSU for something else as this one isn't "enough", obviously the answer I got wasn't satisfying, so guys. Suggest me how to make it work, I have no devices to plug in the 5v line, and the ones that I did were not enough.
You can use a resistor, I've had luck with a 56 Ohm 1/2 Watt resistor between 5v and ground on the 24pin connector. Your supply might need something that draws more power if your really do need to draw 1 Amp. There was a helpful thread on reddit a few days back about this same exact problem. Make sure the wattage rating on the resistor is high enough or you will start a fire...
http://www.reddit.com/r/BitcoinMining/comments/216epw/need_help_with_antminer_s1/cgasnca
How is it wired? You are probably not using the other 12 volt rail.
I had this problem, at first I had the 6 pin connector plugged into one card and then I bought this wire convertor that changed two 4 pin plugs into a 6 pin, it over heated quick and shut down every time. Furthermore if you have two 6 pin connectors on the same wire(as in jumped together) and are using them this is your problem and use my fix as they are on the same rail, see below.
The problem was there are two 12 volt rails and I was only using one rail. I had to cut the ends of the eight(Two for pin) 12 volt plug and wire into the terminals for one card, and plug the 6 pin connector into the other card. Basically 1 rail to CPU and stuff, 1 to GPU and stuff.
I had this problem, at first I had the 6 pin connector plugged into one card and then I bought this wire convertor that changed two 4 pin plugs into a 6 pin, it over heated quick and shut down every time. Furthermore if you have two 6 pin connectors on the same wire(as in jumped together) and are using them this is your problem and use my fix as they are on the same rail, see below.
The problem was there are two 12 volt rails and I was only using one rail. I had to cut the ends of the eight(Two for pin) 12 volt plug and wire into the terminals for one card, and plug the 6 pin connector into the other card. Basically 1 rail to CPU and stuff, 1 to GPU and stuff.
Looks like I'm screwed, I called the retailer and told him I want to swap the PSU for something else as this one isn't "enough", obviously the answer I got wasn't satisfying, so guys. Suggest me how to make it work, I have no devices to plug in the 5v line, and the ones that I did were not enough.
here you go
http://www.ebay.com/itm/NEW-JUMP-START-ATX-20-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/251029011014?pt=LH_DefaultDomain_0&hash=item3a727eba46
http://www.ebay.com/itm/5-PCS-JUMP-START-EPS-ATX-24-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/251029052533?pt=LH_DefaultDomain_0&hash=item3a727f5c75
here is a fancy one
http://www.ebay.com/itm/JUMP-START-ON-OFF-ATX-20-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/261256302157?pt=US_Power_Cables_Connectors&hash=item3cd416ce4d
if you buy one please tell the seller I told you. philipma1957
I buy a lot from him. he will drop price about 25 - 50 cents on one piece.
also once it runs try under clocking to freq 325 vs standard 350.
First off why do I want to remember remember the 5th of november? Really I am curious .
second those links all include a resistor to give you a proper load , They are the clean fix!
and the cheapest one is about 5 bucks or less.
The paperclip solution is a fire hazard and if you burn you place down your insurance may not pay, using an hdd or a cd player along with the paperclip is truly stupid cheap .
no offense as I prefer to say:
stupid cheap
and not use the politically correct:
Pennywise and pound foolish.
When it is what should be done!
This goes out to all s-1 miners myself included. We pay about 600 USD for the s-1 with the psu and the router the switches, cat 6 cables. plus power bill or close to
700 usd and then you don't buy a 4 dollar plug to do the psu correctly. That is stupid cheap.
BTW I have the plugs as being 'stupid cheap' has burned me more then once! LOL
The problem was not the paperclip trick, the problem was as explained by GiLa. Plugging in a simple CD-ROM drive/HDD fixed the problem for me. However, it's a dirty fix.
Those items also include a load resistor to eliminate the need for a HDD. legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
Looks like I'm screwed, I called the retailer and told him I want to swap the PSU for something else as this one isn't "enough", obviously the answer I got wasn't satisfying, so guys. Suggest me how to make it work, I have no devices to plug in the 5v line, and the ones that I did were not enough.
here you go
http://www.ebay.com/itm/NEW-JUMP-START-ATX-20-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/251029011014?pt=LH_DefaultDomain_0&hash=item3a727eba46
http://www.ebay.com/itm/5-PCS-JUMP-START-EPS-ATX-24-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/251029052533?pt=LH_DefaultDomain_0&hash=item3a727f5c75
here is a fancy one
http://www.ebay.com/itm/JUMP-START-ON-OFF-ATX-20-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/261256302157?pt=US_Power_Cables_Connectors&hash=item3cd416ce4d
if you buy one please tell the seller I told you. philipma1957
I buy a lot from him. he will drop price about 25 - 50 cents on one piece.
also once it runs try under clocking to freq 325 vs standard 350.
Looks like I'm screwed, I called the retailer and told him I want to swap the PSU for something else as this one isn't "enough", obviously the answer I got wasn't satisfying, so guys. Suggest me how to make it work, I have no devices to plug in the 5v line, and the ones that I did were not enough.
here you go
http://www.ebay.com/itm/NEW-JUMP-START-ATX-20-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/251029011014?pt=LH_DefaultDomain_0&hash=item3a727eba46
http://www.ebay.com/itm/5-PCS-JUMP-START-EPS-ATX-24-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/251029052533?pt=LH_DefaultDomain_0&hash=item3a727f5c75
here is a fancy one
http://www.ebay.com/itm/JUMP-START-ON-OFF-ATX-20-PIN-POWER-SUPPLY-WITHOUT-A-MOTHERBOARD-MADE-IN-USA-/261256302157?pt=US_Power_Cables_Connectors&hash=item3cd416ce4d
if you buy one please tell the seller I told you. philipma1957
I buy a lot from him. he will drop price about 25 - 50 cents on one piece.
also once it runs try under clocking to freq 325 vs standard 350.
And how do you do that?
I plug a spare PC fan on the red/black cable on a molex connector.
Other options are to attach an old hard drive, floppy drive, CD/DVD drive etc.
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
Looks like I'm screwed, I called the retailer and told him I want to swap the PSU for something else as this one isn't "enough", obviously the answer I got wasn't satisfying, so guys. Suggest me how to make it work, I have no devices to plug in the 5v line, and the ones that I did were not enough.
like I said you need to power something on the 5v cable so that the power supply can balance the power.
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
Im pretty sure I just answered your question above
it be easier, cheaper and safer if you bought a proper one
Dogie's made a list of power supplies you can use
https://bitcointalksearch.org/topic/m.5354145
Also Jonny Guru does a lot of testing of power supplies
http://www.jonnyguru.com/
Too late, already bought it, no time to replace. So what do I do to make it work exactly? it be easier, cheaper and safer if you bought a proper one
Dogie's made a list of power supplies you can use
https://bitcointalksearch.org/topic/m.5354145
Also Jonny Guru does a lot of testing of power supplies
http://www.jonnyguru.com/
Im pretty sure I just answered your question above
it be easier, cheaper and safer if you bought a proper one
Dogie's made a list of power supplies you can use
https://bitcointalksearch.org/topic/m.5354145
Also Jonny Guru does a lot of testing of power supplies
http://www.jonnyguru.com/
it be easier, cheaper and safer if you bought a proper one
Dogie's made a list of power supplies you can use
https://bitcointalksearch.org/topic/m.5354145
Also Jonny Guru does a lot of testing of power supplies
http://www.jonnyguru.com/
HI, I have the same problem with Corsair VS550. So I have to use 2 Corsair VS550 per 1 ANTminer S1. so I don't understand where they claim that they can use 550W. I use other brand which is cheaper one. It work fine. any idea?
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
was doing bit of research when I bought my PSU just in case this would happen anyways I refer
so you need to suck up 1Amp usage on the 5V cable
And how do you do that? anyone have list for power supply that work with S1 ?
I just kill a Corsair VS550 after 3 minutes powering S1.
one member say use corsair RM850, any cheaper ?
Is it actually dead? The problem is that the VS series is group regulated, so it uses both the 5V line and the 12V line in its feedback circuit. If you draw current from only the 12V rail, the voltage on the 12V rail will drop a lot (sometimes under 11V) and the 5V rail will go really high, which can cause it to shut down. I have a VX450 that is similar, it will shut down if I try to run a Single or S1 on it, but if I draw 1A from the 5V rail it runs fine.I just kill a Corsair VS550 after 3 minutes powering S1.
one member say use corsair RM850, any cheaper ?
so you need to suck up 1Amp usage on the 5V cable
was doing bit of research when I bought my PSU just in case this would happen anyways I refer
so you need to suck up 1Amp usage on the 5V cable
anyone have list for power supply that work with S1 ?
I just kill a Corsair VS550 after 3 minutes powering S1.
one member say use corsair RM850, any cheaper ?
Is it actually dead? The problem is that the VS series is group regulated, so it uses both the 5V line and the 12V line in its feedback circuit. If you draw current from only the 12V rail, the voltage on the 12V rail will drop a lot (sometimes under 11V) and the 5V rail will go really high, which can cause it to shut down. I have a VX450 that is similar, it will shut down if I try to run a Single or S1 on it, but if I draw 1A from the 5V rail it runs fine.I just kill a Corsair VS550 after 3 minutes powering S1.
one member say use corsair RM850, any cheaper ?
so you need to suck up 1Amp usage on the 5V cable
Jump to: