Pages:
Author

Topic: Re: [ANN] Las Vegas coin. Masternode cost only $250!! Only 400,000 coins total! - page 79. (Read 79027 times)

legendary
Activity: 1764
Merit: 1022

Ok.. we will get a fix out for this. For now, what I did is added staking=1 to the lasvegascoin.conf file, and restarted the wallet and got:


15:20:27

getstakingstatus


15:20:27

{
    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
    "mnsync" : false,
    "staking status" : true
}


Vegas

So I added the staking=1 to the lasvegascoin.conf file and it shows "staking status" : true in the debug window. So I was watching the wallet and when the wallet sync the sporks/winners/master nodes are all synced the staking icon turns green. It stays green for a couple of second and then goes off as the wallet re-sycn the  sporks/winners/master nodes again. Seems to do it with each block.


legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
Hi Vegas I'm on win 7 pro downloaded the x64 and set it up. Copied and pasted the nodes into the conf file and made sure my upnp was checked, but I'm still showing no peers and therefore the wallet is not syncing. What do I need to do, next?

thanks,
Rick

1st check your wallet version as there have been a few releases. The current version is: https://github.com/keesdewit82/LasVegasCoin/releases/tag/v2.2.101.0

If your on the current version, and not syncing , then delete everything from Roaming/LasVegasCoin except for wallet.dat and restart. To verify this, I deleted everything from LasVegasCoin folder except wallet.dat and resynced within a few seconds. Nothing is needed to resync, not even a .conf file.

Vegas
legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
 Has anyone has any luck getting a master node going? The wallet shows zero on the network and I have had no luck getting one going. I have not seen any POS staking yet either.



Does the wallet think that it is always needing to sync and that is why it is not staking?


getstakingstatus
{
    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
   "mnsync" : false,
    "staking status" : false

}

Then when it gets a new block it get insync for about 2~3 seonnds and then it is back to syncing but 'staking status' never gets true



{
    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
    "mnsync" : true,
    "staking status" : false
}


Ok.. we will get a fix out for this. For now, what I did is added staking=1 to the lasvegascoin.conf file, and restarted the wallet and got:


15:20:27

getstakingstatus


15:20:27

{
    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
    "mnsync" : false,
    "staking status" : true
}


Vegas
full member
Activity: 462
Merit: 100
Parachute for sale. Used once. Small red stain.
anyone else having issues now where you start wallet exe, it loads but wont show on your desktop? I start the wallet, it minimizes to task bar then when I click on the wallet it wont open on the screen at all, just stays in the task bar. I then right click on the tray icon and the menu opens up and click on show/hide and nothing happens. I cannot see the wallet at all now on my screen. This just started and I have done nothing to the program or my computer. Restarted computer, restarted wallet, same problem.
full member
Activity: 207
Merit: 100
Wahoo for the Bitcoin revolution!
Hi Vegas I'm on win 7 pro downloaded the x64 and set it up. Copied and pasted the nodes into the conf file and made sure my upnp was checked, but I'm still showing no peers and therefore the wallet is not syncing. What do I need to do, next?

thanks,
Rick
legendary
Activity: 1764
Merit: 1022
 Has anyone has any luck getting a master node going? The wallet shows zero on the network and I have had no luck getting one going. I have not seen any POS staking yet either.



Does the wallet think that it is always needing to sync and that is why it is not staking?


getstakingstatus
{
    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
   "mnsync" : false,
    "staking status" : false

}

Then when it gets a new block it get insync for about 2~3 seonnds and then it is back to syncing but 'staking status' never gets true



{
    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
    "mnsync" : true,
    "staking status" : false
}
member
Activity: 143
Merit: 10
To all people which have mined at the "old" pool before block 750

I'm not sure if the software will automatically payout the coins, however if it won't I'll need to pay the coins manually.

I wasn't able to get records for all shares / rounds, so I can't payout all coins "fairly".

The balance of the pool address is exactly "12.52350000 VGS" and we've mined around 260 blocks (reward 0.05 VGS), so I want to let all miners decide how we should split them between the miners.

There were some miners with higher hashrates, some with lower ones, so AMOUNT / MINERS wouldn't be pretty fair, that's why I want to ask you all how to proceed.

Sorry for this, the new pool is logging everything exactly..so this won't happen again.

Friendly Regards
- Nigho
my hash rate was 370 mh/s
legendary
Activity: 1764
Merit: 1022
To all people which have mined at the "old" pool before block 750

I'm not sure if the software will automatically payout the coins, however if it won't I'll need to pay the coins manually.

I wasn't able to get records for all shares / rounds, so I can't payout all coins "fairly".

The balance of the pool address is exactly "12.52350000 VGS" and we've mined around 260 blocks (reward 0.05 VGS), so I want to let all miners decide how we should split them between the miners.

There were some miners with higher hashrates, some with lower ones, so AMOUNT / MINERS wouldn't be pretty fair, that's why I want to ask you all how to proceed.

Sorry for this, the new pool is logging everything exactly..so this won't happen again.

Friendly Regards
- Nigho

I know I mined on that pool since it started but i was at 27-29 mh/s though I think you were showing 15000-24000 kh/s for me while I mined. I won't lie I seemed to only be getting 2-10 shares per block due to other 2 miners with KH rates over 100,000. Not sure how to be as fair as possible but maybe if we know all hashrates we can divvy up by percentage. I think I saw 600,000 kh, 400,000 kh, my 15-24000 kh and another that's was lower. The highest rate can get say 45%, second highest 35%, third highest 13%,fourth highest 7%. Something like that. Not sure what everyone thinks. I only remember 4 of us mining but wasn't watching entire time so might be another or two. Or just split the 12.5 up in chunks 4.75vgs , 3.75vgs, 2.5vgs, 1.5 Vgs. I was mining under separker on that pool. I think if none of the other miners answer we can split 50-50 lol. Kidding. Thought one called anonymous, mineru, separker (me), then can't remember other I saw

I think I was the 2nd miner on the pool and I was pushing 150 MH/s
full member
Activity: 462
Merit: 100
Parachute for sale. Used once. Small red stain.
To all people which have mined at the "old" pool before block 750

I'm not sure if the software will automatically payout the coins, however if it won't I'll need to pay the coins manually.

I wasn't able to get records for all shares / rounds, so I can't payout all coins "fairly".

The balance of the pool address is exactly "12.52350000 VGS" and we've mined around 260 blocks (reward 0.05 VGS), so I want to let all miners decide how we should split them between the miners.

There were some miners with higher hashrates, some with lower ones, so AMOUNT / MINERS wouldn't be pretty fair, that's why I want to ask you all how to proceed.

Sorry for this, the new pool is logging everything exactly..so this won't happen again.

Friendly Regards
- Nigho

I know I mined on that pool since it started but i was at 27-29 mh/s though I think you were showing 15000-24000 kh/s for me while I mined. I won't lie I seemed to only be getting 2-10 shares per block due to other 2 miners with KH rates over 100,000. Not sure how to be as fair as possible but maybe if we know all hashrates we can divvy up by percentage. I think I saw 600,000 kh, 400,000 kh, my 15-24000 kh and another that's was lower. The highest rate can get say 45%, second highest 35%, third highest 13%,fourth highest 7%. Something like that. Not sure what everyone thinks. I only remember 4 of us mining but wasn't watching entire time so might be another or two. Or just split the 12.5 up in chunks 4.75vgs , 3.75vgs, 2.5vgs, 1.5 Vgs. I was mining under separker on that pool. I think if none of the other miners answer we can split 50-50 lol. Kidding. Thought one called anonymous, mineru, separker (me), then can't remember other I saw
legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
Ok.. going to continue swaps from fly today. Everything looking good.

Vegas
hero member
Activity: 583
Merit: 502
Assuming you have lasvegascoin-qt running, you have to click on "File->Receiving addresses" and you will see your wallet address

Thanks, i see !
Now , can i mining with RX 470 ?

I don't have one, but I think you could. What you need to do now is to find a "miner" that can handle your card(s) and the algorithm "quark", and learn how to use it Smiley  (Youtube and Google are your best friends).
newbie
Activity: 14
Merit: 0
Assuming you have lasvegascoin-qt running, you have to click on "File->Receiving addresses" and you will see your wallet address

Thanks, i see !
Now , can i mining with RX 470 ?
hero member
Activity: 583
Merit: 502
Assuming you have lasvegascoin-qt running, you have to click on "File->Receiving addresses" and you will see your wallet address
hero member
Activity: 583
Merit: 502
Hello,
Can you help me get my wallet ?
I have download lasvegascoin-qt , but i dont see my wallet for register https://pool.game-news.io
How to get Wallet VGS !
please help me step by step ! Thanks !

lasvegascoin-qt IS your wallet. You'll see your wallet address once you run your wallet (lasvegascoin-qt).

Hope that helps. (You're gonna need to watch videos on Youtube about mining, there is a lot of them)
newbie
Activity: 14
Merit: 0
Hello,
Can you help me get my wallet ?
I have download lasvegascoin-qt , but i dont see my wallet for register https://pool.game-news.io
How to get Wallet VGS !
please help me step by step ! Thanks !
hero member
Activity: 615
Merit: 500
full member
Activity: 130
Merit: 100
To all people which have mined at the "old" pool before block 750

I'm not sure if the software will automatically payout the coins, however if it won't I'll need to pay the coins manually.

I wasn't able to get records for all shares / rounds, so I can't payout all coins "fairly".

The balance of the pool address is exactly "12.52350000 VGS" and we've mined around 260 blocks (reward 0.05 VGS), so I want to let all miners decide how we should split them between the miners.

There were some miners with higher hashrates, some with lower ones, so AMOUNT / MINERS wouldn't be pretty fair, that's why I want to ask you all how to proceed.

Sorry for this, the new pool is logging everything exactly..so this won't happen again.

Friendly Regards
- Nigho
full member
Activity: 130
Merit: 100
Hi i've mined on first pool from 12 to 13 july and still 0 vgs coin in my wallet . How much time for confirmation?

The confirmations required are 251.

This is the address of the old pool https://lasvegascoin.blockexplorer.pro/address/VHTe69dchE4y1W3mqfewXNWvqkwAzkDRqH, just to check.

Normally the script should payout all coins automatically, if not I'll check the database records and do this manually.

Friendly Regards
- Nigho

if i insert my address have error. what's this mean?

If your address didn't have received any funds yet an error will appear since the address isn't known by the network.

yeah but why? i've generated the address in the wallet normally.. so i lost the coin o i can do something?

Do you have any coins sent to this address? or did you used it for mining at the "old" pool?
yes only for mining

The coins of the old pool weren't sent out yet.
member
Activity: 143
Merit: 10
Hi i've mined on first pool from 12 to 13 july and still 0 vgs coin in my wallet . How much time for confirmation?

The confirmations required are 251.

This is the address of the old pool https://lasvegascoin.blockexplorer.pro/address/VHTe69dchE4y1W3mqfewXNWvqkwAzkDRqH, just to check.

Normally the script should payout all coins automatically, if not I'll check the database records and do this manually.

Friendly Regards
- Nigho

if i insert my address have error. what's this mean?

If your address didn't have received any funds yet an error will appear since the address isn't known by the network.

yeah but why? i've generated the address in the wallet normally.. so i lost the coin o i can do something?

Do you have any coins sent to this address? or did you used it for mining at the "old" pool?
yes only for mining
full member
Activity: 130
Merit: 100
Hi i've mined on first pool from 12 to 13 july and still 0 vgs coin in my wallet . How much time for confirmation?

The confirmations required are 251.

This is the address of the old pool https://lasvegascoin.blockexplorer.pro/address/VHTe69dchE4y1W3mqfewXNWvqkwAzkDRqH, just to check.

Normally the script should payout all coins automatically, if not I'll check the database records and do this manually.

Friendly Regards
- Nigho

if i insert my address have error. what's this mean?

If your address didn't have received any funds yet an error will appear since the address isn't known by the network.

yeah but why? i've generated the address in the wallet normally.. so i lost the coin o i can do something?

Do you have any coins sent to this address? or did you used it for mining at the "old" pool?
Pages:
Jump to: