i don't see anything out of the ordinary in Claymore logs.
Win says
A connected hardware error has occurred
Component: PCIE Root Port
Error Source: Advanced Error Reporting (PCIE)
Bus Device Function 0x0:0x1C:0x6
VendorID:DeviceID: 0x8086:0xA296
Class Code: 0x30400
New rig working fine for a couple of days
500w is an Antec but it is a couple of years old
After I learn and exhaust all my resources, I might have to call someone
All psus are at 100 with temps running from 49-66c adding another fan today
Thanks for the feedback. I hope the Win log points us to something.
Topic: Rebooting 2x Per Day - page 2. (Read 713 times)
The reasons for this can be many. Maybe you need to call a specialist. Windows keeps a log of faults and if there was a restart information must appear in this magazine. I also want to draw your attention to the fact that the temperature is 70 degrees high temperature. My GPU never heated above 58 degrees. Perhaps the driver is to control the temperature and it protects your GPU from overheating.
Can't seem to diagnose why my rig is rebooting itself twice a day. Running a mix of 6 gpus, all nvidia on a biostar tb250btc with g temps running well under 70c. Anyone else have an issue like this and what was the culprit? Thanks!
Is this a new rig that you just built? Or was it working fine for some time and started rebooting only recently?There's not that many good 500W PSUs out there, most of them are crap, so if you're powering 3 cards with one of those, that might be your problem. Even though the cards only take 350W, that could still be too much for a cheap PSU. Then again, you didn't mention the exact specs so we're all guessing here.
You wrote that you need to watch log miner. But you also need to check system log: compmgmt.msc -> Event viewer -> Windows logs -> System
Thanks all! Here are some answers.
OS Win 10 Pro
Fans are all 100
Will look at logs
All power connected to mobo including pcie supplement power
Using 1000w for mobo and 3 demanding gpus 500w for less demanding gpus. They draw about 500 and 350w respectively
Does this help for diagnosis? Thanks
OS Win 10 Pro
Fans are all 100
Will look at logs
All power connected to mobo including pcie supplement power
Using 1000w for mobo and 3 demanding gpus 500w for less demanding gpus. They draw about 500 and 350w respectively
Does this help for diagnosis? Thanks
Can't seem to diagnose why my rig is rebooting itself twice a day. Running a mix of 6 gpus, all nvidia on a biostar tb250btc with g temps running well under 70c. Anyone else have an issue like this and what was the culprit? Thanks!
1. check latest log of miner
2. check that all of your extra power plugs are connected to motherboard
3. i guess you use 2 separeted PSU, make sure, that one PSU is powering all motherboard power ins ( ATX, CPU, 2x 4 pin on mobo) and second PSU just powering VGA and risers.
hm interesting. Try to speed up your fans more, not by one or two, above 80% and leave it like that for a few hours, but something is not right
What are the specs? Most importantly, the operating system?
Can't seem to diagnose why my rig is rebooting itself twice a day. Running a mix of 6 gpus, all nvidia on a biostar tb250btc with g temps running well under 70c. Anyone else have an issue like this and what was the culprit? Thanks!
Jump to: