Topic: rig hangs but not freeze (Read 335 times)
You have to reinstall drivers, decrease overclocking, add more space for the swap file and check your Windows for errors by launching eventvwr.msc.
probably some problem with the batch file you have to configurate.
Are you running your cards using codes on the miner?? Normally hangs occur when some cards have a big overclock that they cannot do, or excessive undervolting.
Are you running your cards using codes on the miner?? Normally hangs occur when some cards have a big overclock that they cannot do, or excessive undervolting.
Quote
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool 149.202.89.224:4444 -ewal '''' -epsw x -cvddc 920 -mvddc 920 -minspeed 175 -ethi 6 -asm 2 -ttli 56 -tstop 72
this is my start file setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool 149.202.89.224:4444 -ewal '''' -epsw x -cvddc 920 -mvddc 920 -minspeed 175 -ethi 6 -asm 2 -ttli 56 -tstop 72
probably some problem with the batch file you have to configurate.
Are you running your cards using codes on the miner?? Normally hangs occur when some cards have a big overclock that they cannot do, or excessive undervolting.
Are you running your cards using codes on the miner?? Normally hangs occur when some cards have a big overclock that they cannot do, or excessive undervolting.
is there any script that use -r parameters for like" if 5 time watchdog restart claymore ,restart rig"?
you know its stuck on restarting and cant run claymore when this happend.and create a lots of log file like this
you know its stuck on restarting and cant run claymore when this happend.and create a lots of log file like this
Code:
09:56:34:675 100
09:56:34:675 100 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
09:56:34:675 100 º Claymore's Dual GPU Miner - v11.9 º
09:56:34:675 100 º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º
09:56:34:675 100 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
09:56:34:675 100
09:56:34:675 100 b597
09:56:34:893 100 ETH: 1 pool is specified
09:56:34:893 100 Main Ethereum pool is 149.202.89.224:4444
09:56:34:893 100 DCR: 0 pool is specified
09:57:07:709 fa0
09:57:40:525 fa0
09:58:13:341 fa0
09:58:46:157 fa0
09:59:18:973 fa0
09:59:51:789 fa0
10:00:24:605 fa0
10:00:57:421 fa0
10:01:30:237 fa0
10:02:03:053 fa0
10:02:03:053 fa0 Minimal speed ("-minspeed" option) was set to 175 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
10:02:04:303 fa0 Restarting OK, exit...
its not minimal speed problem just claymore cant run. actually half run because it detect that it cant reach minimal speed so restart again and again.so weird situation and happening randomly.and if i try to close claymore its freeze system completely . 09:56:34:675 100 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
09:56:34:675 100 º Claymore's Dual GPU Miner - v11.9 º
09:56:34:675 100 º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º
09:56:34:675 100 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
09:56:34:675 100
09:56:34:675 100 b597
09:56:34:893 100 ETH: 1 pool is specified
09:56:34:893 100 Main Ethereum pool is 149.202.89.224:4444
09:56:34:893 100 DCR: 0 pool is specified
09:57:07:709 fa0
09:57:40:525 fa0
09:58:13:341 fa0
09:58:46:157 fa0
09:59:18:973 fa0
09:59:51:789 fa0
10:00:24:605 fa0
10:00:57:421 fa0
10:01:30:237 fa0
10:02:03:053 fa0
10:02:03:053 fa0 Minimal speed ("-minspeed" option) was set to 175 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
10:02:04:303 fa0 Restarting OK, exit...
one riser that have problem, stop working completely .i changed it .and this happened again after 18 hours.
change riser position in rig 70 hours work
it happened again.
Could be anything mate. Computers are sneaky bastards 
Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming.
i use air conditioner for cooling my rigs.in my country because of drouth, electricity rationed Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming.
Are you still encountering issues?
thanks alot guys
Could be anything mate. Computers are sneaky bastards Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming.
i use air conditioner for cooling my rigs.in my country because of drouth, electricity rationed Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming.Are you still encountering issues?
I have this issue also with some of my rigs.
They ran fine for months and now they started crashing from time to time.
What you should try to do is lower your memory clock a little and increase your memory voltage a little and see if it goes away.
If it doesn't then maybe your PSU is dying.
These RX gpus were always a pain to get stable. Especially difficult with the bad AMD drivers.
They ran fine for months and now they started crashing from time to time.
What you should try to do is lower your memory clock a little and increase your memory voltage a little and see if it goes away.
If it doesn't then maybe your PSU is dying.
These RX gpus were always a pain to get stable. Especially difficult with the bad AMD drivers.
Could be anything mate. Computers are sneaky bastards Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming.
i use air conditioner for cooling my rigs.in my country because of drouth, electricity rationed Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming.
Could be anything mate. Computers are sneaky bastards Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming.
Right now i found my rig freezed, but i think that is becourse of this god damn heat wave northern europe is feeling right now. I acually had to shut down my rig to prevent overheating due to the weather. Its sad, but i guess its the new reality with global warming.
reinstall the windows and 34 hours work without problem.ill report 24-48 hours later
its happened again
not antivirus fault
next step is reinstall the windows
not antivirus fault
next step is reinstall the windows
change the riser on gpu 3,5
low a little bit the OC -10 on clock and mm and +10 mv
blockchain driver use a little bit more power, dont keep it.
actually ill try this when new riser reach to me .but i dont think the problem is with the riser low a little bit the OC -10 on clock and mm and +10 mv
blockchain driver use a little bit more power, dont keep it.
You've asked to provide more info above. Those logs showed something went wrong (that's only the result) we need something that may cause that. As other people said above, it can be caused by various reasons:
Power Issue: then tell us PSUs that you are using
OverClock - Under Volt: then tell us your current OC-UV settings.
And so on..
Show us your bat file, hide your sensitive info! It will make us easier to analyze your problems.
It showed that you've set (-minspeed), when your rig doesn't reach that specified amount of speed, the miner will restart nor call (-r) parameter (if -r set to "1") it will re-starting Claymore.
Try to bring back your cards setting (troubled card) to default may help.
Will be better to visit Claymore official thread for the best result related to your problem!
https://bitcointalksearch.org/topic/claymores-dual-ethereum-amdnvidia-gpu-miner-v150-windowslinux-1433925
i use 650 psu for every 4 aours rx570 and my wattage is under 600watt for each psu and i have no problem until now .i have another rig that i did exactly this configuration and have no problem at all.Power Issue: then tell us PSUs that you are using
OverClock - Under Volt: then tell us your current OC-UV settings.
And so on..
Show us your bat file, hide your sensitive info! It will make us easier to analyze your problems.
........
23:57:33:427 185c Minimal speed ("-minspeed" option) was set to 175 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
23:57:34:677 185c Restarting OK, exit...
this occure whit two gpu's "3,5" rarely gpu 0
iuse claymore 11.9 with 18.5 amd driver. now actually i use claymore 11.5 with blockchain driver before, but this happens again .with one difference .its not restart claymore but stuck on this :
WATCHDOG: GPU 5 hangs in OpenCL call, exit
23:57:33:427 185c Minimal speed ("-minspeed" option) was set to 175 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
23:57:34:677 185c Restarting OK, exit...
this occure whit two gpu's "3,5" rarely gpu 0
iuse claymore 11.9 with 18.5 amd driver. now actually i use claymore 11.5 with blockchain driver before, but this happens again .with one difference .its not restart claymore but stuck on this :
WATCHDOG: GPU 5 hangs in OpenCL call, exit
It showed that you've set (-minspeed), when your rig doesn't reach that specified amount of speed, the miner will restart nor call (-r) parameter (if -r set to "1") it will re-starting Claymore.
Try to bring back your cards setting (troubled card) to default may help.
Will be better to visit Claymore official thread for the best result related to your problem!
https://bitcointalksearch.org/topic/claymores-dual-ethereum-amdnvidia-gpu-miner-v150-windowslinux-1433925
this is my claymore settings:
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal '''' -epsw x -cvddc 920 -mvddc 920 -minspeed 175 -ethi 6 -asm 2 -ttli 56 -tstop 72
coreclock is on the bios and its set on 1150 and memclock on 2050 and in the other rig that work without problem the cvddc and mvddc is on 900 on rx580
i tried some other clock but the problem not solved
change the riser on gpu 3,5
low a little bit the OC -10 on clock and mm and +10 mv
blockchain driver use a little bit more power, dont keep it.
low a little bit the OC -10 on clock and mm and +10 mv
blockchain driver use a little bit more power, dont keep it.
You've asked to provide more info above. Those logs showed something went wrong (that's only the result) we need something that may cause that. As other people said above, it can be caused by various reasons:
Power Issue: then tell us PSUs that you are using
OverClock - Under Volt: then tell us your current OC-UV settings.
And so on..
Show us your bat file, hide your sensitive info! It will make us easier to analyze your problems.
It showed that you've set (-minspeed), when your rig doesn't reach that specified amount of speed, the miner will restart nor call (-r) parameter (if -r set to "1") it will re-starting Claymore.
Try to bring back your cards setting (troubled card) to default may help.
Will be better to visit Claymore official thread for the best result related to your problem!
https://bitcointalksearch.org/topic/claymores-dual-ethereum-amdnvidia-gpu-miner-v150-windowslinux-1433925
Power Issue: then tell us PSUs that you are using
OverClock - Under Volt: then tell us your current OC-UV settings.
And so on..
Show us your bat file, hide your sensitive info! It will make us easier to analyze your problems.
........
23:57:33:427 185c Minimal speed ("-minspeed" option) was set to 175 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
23:57:34:677 185c Restarting OK, exit...
this occure whit two gpu's "3,5" rarely gpu 0
iuse claymore 11.9 with 18.5 amd driver. now actually i use claymore 11.5 with blockchain driver before, but this happens again .with one difference .its not restart claymore but stuck on this :
WATCHDOG: GPU 5 hangs in OpenCL call, exit
23:57:33:427 185c Minimal speed ("-minspeed" option) was set to 175 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
23:57:34:677 185c Restarting OK, exit...
this occure whit two gpu's "3,5" rarely gpu 0
iuse claymore 11.9 with 18.5 amd driver. now actually i use claymore 11.5 with blockchain driver before, but this happens again .with one difference .its not restart claymore but stuck on this :
WATCHDOG: GPU 5 hangs in OpenCL call, exit
It showed that you've set (-minspeed), when your rig doesn't reach that specified amount of speed, the miner will restart nor call (-r) parameter (if -r set to "1") it will re-starting Claymore.
Try to bring back your cards setting (troubled card) to default may help.
Will be better to visit Claymore official thread for the best result related to your problem!
https://bitcointalksearch.org/topic/claymores-dual-ethereum-amdnvidia-gpu-miner-v150-windowslinux-1433925
Have you try to disable antivirus ? Sometimes antivirus make claymore unstable, so it can make the windows system unstable too. But if you have done that, i can sure your windows system need reinstall. Maybe some system file corrupt or that happen when you updated the windows. You can try to reserved update windows or disable antivirus first before reinstall it.
ok ill test and report
Have you try to disable antivirus ? Sometimes antivirus make claymore unstable, so it can make the windows system unstable too. But if you have done that, i can sure your windows system need reinstall. Maybe some system file corrupt or that happen when you updated the windows. You can try to reserved update windows or disable antivirus first before reinstall it.
Jump to: