Running AntMiner U1s with different frequencies

kabopar

hero member

Activity: 616

Merit: 500

Quote from: f4t4lgodsend on March 13, 2014, 01:17:01 AM

Hello,
I have around 30 AntMiner u1s. During testing I found some don't give hardware errors at 1.8ghz and others at 2.0. Is it possible to run them at different frequencies on the same computer/miner software and if so how would I go about doing this? Thank you for your help

You should be able to have different settings per device, for example BFGMiner (see the readme.txt file) has the option
--set-device Set default parameters on devices; eg, NFY:osc6_bits=50

You'll need to do some research and find the correct syntax for setting individual devices on Antminer U1. Suggest that you read https://bitcointalksearch.org/topic/bitmain-antminer-u1-tips-tricks-390929

Cheers

alh

legendary

Activity: 1846

Merit: 1052

An alternative is to "split the difference" for the two. In other words, run both at 1.9 GH/s.

You can get 1.9 by using a frequency value of 0901. While I only have about a dozen of these
I have yet to see one that doesn't run smoothly and error free at 1.9 GH/s.

Most folks seem to focus in on 1.6, 1.8, and 2.0, without knowing that the "in between"
speeds exist and work fine. It's all in the "8" value within 0981 (or 0781). Changing out
the "8" for a "0" let's you get the "odd" speeds.

f4t4lgodsend

newbie

Activity: 4

Merit: 0

Hello,
I have around 30 AntMiner u1s. During testing I found some don't give hardware errors at 1.8ghz and others at 2.0. Is it possible to run them at different frequencies on the same computer/miner software and if so how would I go about doing this? Thank you for your help

Topic: Running AntMiner U1s with different frequencies (Read 538 times)