I have the same setup like you Cryptozillah, but can you say me how much watts you consume for the whole rig ??
1200w at the wall overclocked.Too much, cant figure out why it is pulling that much power.
My system should pull around 75w, so the gpus have to pull around 180w+ each
What the hell, 1200W is too much for the RX480, i've seen before somes miners claim and share 140-150 mh/s with 750-850W for the whole rig, if someone have good settings to share you are welcome
I am starting to think that my wattmeter is broken.
here is a rx 480 stock gpu leave it alone not in the photo
then the memory I am at stock 2000
then memory volts I am at stock auto set here first for your baseline.
the key to under clock is this see the oval is at -23 that is what saves watts. so with all settings above stock
set your fans close to mine and
try power saver at -15 you will mine in the 24-25mh spot check the watts used
set power saver at -20 you will mine in same 24-25mh spot check watts used
then -22 , -24 , -26, -28, -30 keep checking watts and mh somewhere near 26-32 mh drops a lot so go to -25 what ever for your cards
you may have the six cards like this:
one -21
two -27
three -26
four -29
five -20
six -23
